3x Futurebits delivered.
1 s7 shipped.
added breakout board.
Topic: . (Read 1023 times)
I'm interested in the dead S7 hash card.
Would you quote shipping to U.K. please?
And tell me is it burned or just stopped hashing?
It was showing all chips, no temp and not hashing...probably burnt? I can photo it if you'd like. It happened after a breaker got flipped off/on while the miner was still hashing...so whatever that causes.
International shipping is usually too much, I believe it would cost $40 to ship the flat rate box these fit in.
WTB
Used x-11 miners.
entertaining thoughts of buying s9/r4/t9/a4/l3/a7 or similar efficiency level miners. >anahkinisme's price +shipping cost but <1200
WTS
2x S7 4.73th (#6 has an old IO board, #3 is an F1 version with a second fan) $300 ea
#4 http://imgur.com/QczfrfC http://imgur.com/p6jo4aK #6 http://imgur.com/Ffwq7Ng http://imgur.com/zGFsl2O
1x S7 4.73th pending
1x S7 4.86th (I think it's a batch 5). $350
3x S7-LN (1 is a sidehack PIC mod). $300 ea
3x Futurebit miners $60 ea sold
1x r9 290 3GB Reference card. $120
1x Antrouter R1 $40. http://imgur.com/ne6HFLs
1x Eyeboot 49 port usb hub. $120. http://imgur.com/7oHlTgY
1x 120mm 6000rpm bitmain fan. $15
1x EVGA 750ti 2GB $100
1x "dead" 45 chip s7 blade 700m. $5 +shipping
1x Gen1 Compute stick, dual boot win8/lubuntu. $120
1x 16gb EthOS hdd. $30
20x 16GB Orange USB 2.0 sticks. $7ea http://imgur.com/Xg2JPmu
some grow equipment and less useful/relevant electronics and junk for sale
Used x-11 miners.
entertaining thoughts of buying s9/r4/t9/a4/l3/a7 or similar efficiency level miners. >anahkinisme's price +shipping cost but <1200
WTS
2x S7 4.73th (#6 has an old IO board, #3 is an F1 version with a second fan) $300 ea
#4 http://imgur.com/QczfrfC http://imgur.com/p6jo4aK #6 http://imgur.com/Ffwq7Ng http://imgur.com/zGFsl2O
1x S7 4.86th (I think it's a batch 5). $350
3x S7-LN (1 is a sidehack PIC mod). $300 ea
1x r9 290 3GB Reference card. $120
1x Antrouter R1 $40. http://imgur.com/ne6HFLs
1x Eyeboot 49 port usb hub. $120. http://imgur.com/7oHlTgY
1x 120mm 6000rpm bitmain fan. $15
1x EVGA 750ti 2GB $100
1x "dead" 45 chip s7 blade 700m. $5 +shipping
1x Gen1 Compute stick, dual boot win8/lubuntu. $120
1x 16gb EthOS hdd. $30
20x 16GB Orange USB 2.0 sticks. $7ea http://imgur.com/Xg2JPmu
some grow equipment and less useful/relevant electronics and junk for sale
I'm interested in the dead S7 hash card.
Would you quote shipping to U.K. please?
And tell me is it burned or just stopped hashing?
Pretty sure silverfish only made a limited batch of single blade miners that didn't sell very much and was generally disliked by the community, and they ran at 240w. Most silverfish were 28M so it'll be hard to find. If you're not already aware, these things are esentially bricks once they get to zero authentication time unless this issue's been fixed- last i checked they only had times above zero hours fixed.
you have to upgrade the firmware to v6 to bypass the authentication issue http://imgur.com/dfEZc4A
and there is a hardware mod that can be done to each blade that essentially volt mods them to the better efficiency, a resistor or something...I don't really want to do any soldering.
1. Are you willing to ship to France ?
2. Are your s7 ln with the PSU (if not the original one, does it support 230V)
3. how much for the 2 un modded s7ln s ?
2. Are your s7 ln with the PSU (if not the original one, does it support 230V)
3. how much for the 2 un modded s7ln s ?
I'm willing to ship to France, although shipping from the US seems to cost at least 2-5x as much as shipping within the US. this would have to be reflected in the price.
The unmodded ln's are bitmain originals. psu everything. I'd prefer to keep the psu's to make a couple gpu rigs, but also hate to break up a complete product, psu would effect shipping weight/cost as well.
Quote from: ncsupanda
I've got one of the old silverfish models - do you have a price in mind? Shipping from 27606.
Is it a 28M or 24M model? preferably <200
1. Are you willing to ship to France ?
2. Are your s7 ln with the PSU (if not the original one, does it support 230V)
3. how much for the 2 un modded s7ln s ?
2. Are your s7 ln with the PSU (if not the original one, does it support 230V)
3. how much for the 2 un modded s7ln s ?
I'm willing to ship to France, although shipping from the US seems to cost at least 2-5x as much as shipping within the US. this would have to be reflected in the price.
The unmodded ln's are bitmain originals. psu everything. I'd prefer to keep the psu's to make a couple gpu rigs, but also hate to break up a complete product, psu would effect shipping weight/cost as well.
Quote from: ncsupanda
I've got one of the old silverfish models - do you have a price in mind? Shipping from 27606.
Is it a 28M or 24M model? preferably <200
Jump to: