0 shares with GUIMiner | Bitcointalksearch.org

R3dcell

member

Activity: 78

Merit: 10

Quote from: trokie on July 02, 2013, 10:34:52 AM

Quote from: Damnsammit on July 02, 2013, 08:27:43 AM

Sounds like driver issues. Had the same problem when I first started with my 5850.

Had to do a fresh install of Windows and used Catalyst 13.1 and everything worked fine.

I'm using 13.4 at the moment. Can I downgrade it without reinstalling Windows?

yes, of course you can

Damnsammit

sr. member

Activity: 406

Merit: 250

Quote from: trokie on July 02, 2013, 10:34:52 AM

Quote from: Damnsammit on July 02, 2013, 08:27:43 AM

Sounds like driver issues. Had the same problem when I first started with my 5850.

Had to do a fresh install of Windows and used Catalyst 13.1 and everything worked fine.

I'm using 13.4 at the moment. Can I downgrade it without reinstalling Windows?

You might be able to. I needed a fresh install because I was using an NVIDIA card before putting in my 5850, then I proceeded to download like 5 different versions of Catalyst and SDK so I couldn't get it to work right. I finally got cgminer to work but then was getting nonce errors.

Uninstall everything and use Catalyst 13.1 and see if it works.

The errors definitely look like driver errors though.

Once you get GUIminer working, I suggest moving to cgminer. You will notice better hashrates with that.

trokie

newbie

Activity: 7

Merit: 0

Quote from: Damnsammit on July 02, 2013, 08:27:43 AM

Sounds like driver issues. Had the same problem when I first started with my 5850.

Had to do a fresh install of Windows and used Catalyst 13.1 and everything worked fine.

I'm using 13.4 at the moment. Can I downgrade it without reinstalling Windows?

Damnsammit

sr. member

Activity: 406

Merit: 250

Sounds like driver issues. Had the same problem when I first started with my 5850.

Had to do a fresh install of Windows and used Catalyst 13.1 and everything worked fine.

R3dcell

member

Activity: 78

Merit: 10

Quote from: trokie on July 02, 2013, 03:06:55 AM

Quote from: R3dcell on July 01, 2013, 03:34:36 PM

I would try another pool like BTC Guild and see if it works, if it still doesnt work, I would try a different driver version(older version) than the one you are currently using.

I tried the 50BTC pool with 50Miner and that didn't work either Sad

hmm... Is your GUIMiner an old version? or using an older version of a miner?

trokie

newbie

Activity: 7

Merit: 0

Quote from: R3dcell on July 01, 2013, 03:34:36 PM

I would try another pool like BTC Guild and see if it works, if it still doesnt work, I would try a different driver version(older version) than the one you are currently using.

I tried the 50BTC pool with 50Miner and that didn't work either Sad

R3dcell

member

Activity: 78

Merit: 10

I would try another pool like BTC Guild and see if it works, if it still doesnt work, I would try a different driver version(older version) than the one you are currently using.

trokie

newbie

Activity: 7

Merit: 0

Quote from: Asrael999 on July 01, 2013, 06:41:38 AM

if memory serves there may be an issue with GUIMiner pointing at Slush's pool. I am not sure it has been updated to the current address.

try selecting other - then enter stratum.bitcoin.cz and port 3333 to see if you can get a connection that way.

72 MH/z is about right for a low spec 5670

I tried stratum.bitcoin.cz and port 3333 in GUIMiner, no errors so far.
Thanks

edit: Spoke too soon Sad

Code:

2013-07-01 20:09:19: Listener for "Default": stratum.bitcoin.cz:3333 01/07/2013 20:09:19, Verification failed, check hardware! (1:0:Redwood, 8e454765)

Asrael999

hero member

Activity: 703

Merit: 502

if memory serves there may be an issue with GUIMiner pointing at Slush's pool. I am not sure it has been updated to the current address.

try selecting other - then enter stratum.bitcoin.cz and port 3333 to see if you can get a connection that way.

72 MH/z is about right for a low spec 5670

trokie

newbie

Activity: 7

Merit: 0

Quote from: Asrael999 on July 01, 2013, 04:46:25 AM

if you click on view and bring up the console what does it say? It looks like you are having connection issues as no shares have been accepted, also what sort of card are you using 72 MHZ is to slow to be profitable these days.

Here's what it shows in the console

Code:

2013-07-01 10:50:35: Listener for "Default": api2.bitcoin.cz:8332 01/07/2013 10:50:35, Verification failed, check hardware! (1:0:Redwood, b6105806)

I am using a HD5670 to mine Embarrassed

naphto

sr. member

Activity: 392

Merit: 250

You should mine altcoin instead of btc yes

Asrael999

hero member

Activity: 703

Merit: 502

if you click on view and bring up the console what does it say? It looks like you are having connection issues as no shares have been accepted, also what sort of card are you using 72 MHZ is to slow to be profitable these days.

trokie

newbie

Activity: 7

Merit: 0

I'm using GUIMiner with Slush's pool, I have made my account and made a worker and I have left it mining for a while to find there's still 0 shares accepted?

Here's a screenshot of my GUIMiner
http://puu.sh/3ss9z.png

Also the worker on my account shows 0 mhash/s
http://puu.sh/3ssb9.png

Topic: 0 shares with GUIMiner (Read 3116 times)