Topic: 1 BTC reward for help with BAMT settings (FIXED) (Read 1304 times)
You're wellcome. Thank YOU, for your tip!!
ok, thanks.
if it works - 1GnTTqDcXBNDViPt7HPore1TigPfYo6RMN , and report back the results.
if it doesn´t report back anyway, someone with more experience than me can help out.
if it works - 1GnTTqDcXBNDViPt7HPore1TigPfYo6RMN , and report back the results.
if it doesn´t report back anyway, someone with more experience than me can help out.
Sent!
Thanks again for the help.
That did the trick!
I will send you one shiny BTC in the morning when I am back in front of my hot wallet!
Thanks!!
I will send you one shiny BTC in the morning when I am back in front of my hot wallet!
Thanks!!
ok, thanks.
if it works - 1GnTTqDcXBNDViPt7HPore1TigPfYo6RMN , and report back the results.
if it doesn´t report back anyway, someone with more experience than me can help out.
if it works - 1GnTTqDcXBNDViPt7HPore1TigPfYo6RMN , and report back the results.
if it doesn´t report back anyway, someone with more experience than me can help out.
Sweet.....I will try this when I get home tonight. If it works, you get the bounty!
ok, so you 3 values. you change the 3rd value, that's for the "when mining" settings.
just uncoment the line and had your values.
i.e you have this:
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
Change it to this:
# core_speed_0: 300
# core_speed_1: 800
core_speed_2: 980
Make sure you take the # and the space. Then hit restart mining, and see how it goes. Hope it helps.
This what i have in mine bamt.conf:
# core_speed_0: 300
# core_speed_1: 800
core_speed_2: 950
# mem_speed_0: 300
# mem_speed_1: 300
mem_speed_2: 350
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# recommend to set and forget fan, preferably at 100
fan_speed: 100
just uncoment the line and had your values.
i.e you have this:
# core_speed_0: 300
# core_speed_1: 800
# core_speed_2: 980
Change it to this:
# core_speed_0: 300
# core_speed_1: 800
core_speed_2: 980
Make sure you take the # and the space. Then hit restart mining, and see how it goes. Hope it helps.
This what i have in mine bamt.conf:
# core_speed_0: 300
# core_speed_1: 800
core_speed_2: 950
# mem_speed_0: 300
# mem_speed_1: 300
mem_speed_2: 350
# core_voltage_0: 1.125
# core_voltage_1: 1.125
# core_voltage_2: 1.125000
# recommend to set and forget fan, preferably at 100
fan_speed: 100
I am confused by the 3 profiles that go with every GPU. Not sure what to change, or which is being used. Then when I run 3x 5970's, it just multiplies the confusion.
Can't help much here...but i have a 5879 on BAMT doing 438MH/s. 950/350 at stock voltage with temp 60º.
What can't you configure?? What is your problem with getting it overclocked?
What can't you configure?? What is your problem with getting it overclocked?
Hi all,
I am having some trouble getting the most out of my 5970's in BAMT. I cannot seem to get the right OC settings to load from the config file.
I offer a 1 BTC reward for the first person to post an example that successfully gets my cards to 350 MH/s per core.
I am shooting for 800/300.
thanks!
I am having some trouble getting the most out of my 5970's in BAMT. I cannot seem to get the right OC settings to load from the config file.
I offer a 1 BTC reward for the first person to post an example that successfully gets my cards to 350 MH/s per core.
I am shooting for 800/300.
thanks!
Jump to: