https://drive.google.com/file/d/0B9rkmjqbrjKhUlVMbl9JUzhWbmM/edit?usp=sharing here is a copy of chainminer_V3 with bfgminer also compiled (its stored on root profile though so please be sure to change your passwd for root file)
Darn - Guessing I missed out on the bounty :/
Topic: 1 BTC whoever gets this Bitfury Unit up and Running (Read 1751 times)
and no one mentions mega.co.nz shame on you all now with 50GB free 
Well I have it up and running....chainminer on all my SD Cards was F'd up. I'll keep you posted, I'm going to implement this on my other rigs with SD cards just to make sure.
I haven't been this close to throwing my laptop in a long time. I have to much money invested here to not have it up and running. You'd think there'd be verified operational SD images we could download along with an up to date how to guide.
Okay I got your msg. I'm uploading my v3 img to my own cloud storage and will share a link here when its uploaded. Its V3 Image with BFGminer.
Just remember to do
Quote
sudo passwd
to set a new password for Root.This is a 3.68 GB file so it will likely take me all night for it to get carried over. but I will have the link for you, likely by tomorrow morning. Too bad you're not in the bay area, I would just drop off a copy to you.
I haven't been this close to throwing my laptop in a long time. I have to much money invested here to not have it up and running. You'd think there'd be verified operational SD images we could download along with an up to date how to guide.
Can you paste the webpage from the miner?Can you enable remote login for few mins?
Thanks
I haven't been this close to throwing my laptop in a long time. I have to much money invested here to not have it up and running. You'd think there'd be verified operational SD images we could download along with an up to date how to guide.
i'm having the same problem. i too would pay you 1btc if you are able to help me to get this working. PM if you have any idea on how.
https://www.wetransfer.com/ is a free service for large files.
EDIT: the service changed since I last used it, only 2 GB to be sent for free.
EDIT 2: use https://wuala.com/ to share, it will fit this image...
EDIT: the service changed since I last used it, only 2 GB to be sent for free.
EDIT 2: use https://wuala.com/ to share, it will fit this image...
For a heads up, I'm going to be out for about 4-5 hrs. So I won't be able to try anything until then.
I have this but its a huge file like 3.68 GB...how can I share the file with you? (includes working copy of bfgminer and v3 chainminer compiled onto image.
Rapidshare.com I believe will work for this. You'll have to get the premium account monthly for $17.50 Euros or so and I'll reimburse you for this regardless via bitcoin regardless for this month even if your image doesn't work. At the end of month just don't renew or that would be on you. You need the premium account because of the size of this single file. If the image works then I'll give you 1 BTC minus the rapidshare.com price.
I had to delete the existing chainminer and then did a git clone https://github.com/bfsb/chainminer.git, then make.
c32
c32
For a heads up, I'm going to be out for about 4-5 hrs. So I won't be able to try anything until then.
I have this but its a huge file like 3.68 GB...how can I share the file with you? (includes working copy of bfgminer and v3 chainminer compiled onto image.
For a heads up, I'm going to be out for about 4-5 hrs. So I won't be able to try anything until then.
I've spent the last 12 hours trying to get my bitfury 400 gigahash units up and running. I will send 1 BTC over to whoever gets me up and running. I'm thinking either the software isn't on my SD card image or somethings a miss. I have a nice amount of equipment in front of me and they are just sitting. It's not a psu issue as I have a bunch of 1250 psu's with other mboards and all are acting the same way. They aren't hashing so its not hardware related. I'm also running just 1 card in the first slot closest to the raspberry pi to rule out communication issues.
What I want is an SD IMAGE of the newest bitfury chainminer v 3. I want it already on the sd card along with bfminer. I'll take the image you provide and copy it to a new Sandisk class 10 SD card via windows. Then I'll insert it into my raspberry pi on my bitfury unit. What I'd like to do is SSH into my raspberry pi via putty. Then all I have to do is type in the info that you provide to get me up and running. This way if I can chose if I want to run chainminer or bfminer based off performance and stability. If you believe the cards are overclocked to high in the software, then downclock them a bit and I'll manually tune them up as time goes on. I have too many rigs just sitting here.
I've tried this from the bifury link
https://bitcointalksearch.org/topic/guide-bitfury-miner-supporttuning-287590
cd /opt/bitfury/chainminer
sudo make clean
sudo make
sudo killall screen
sudo /etc/rc.local
What I want is an SD IMAGE of the newest bitfury chainminer v 3. I want it already on the sd card along with bfminer. I'll take the image you provide and copy it to a new Sandisk class 10 SD card via windows. Then I'll insert it into my raspberry pi on my bitfury unit. What I'd like to do is SSH into my raspberry pi via putty. Then all I have to do is type in the info that you provide to get me up and running. This way if I can chose if I want to run chainminer or bfminer based off performance and stability. If you believe the cards are overclocked to high in the software, then downclock them a bit and I'll manually tune them up as time goes on. I have too many rigs just sitting here.
I've tried this from the bifury link
https://bitcointalksearch.org/topic/guide-bitfury-miner-supporttuning-287590
cd /opt/bitfury/chainminer
sudo make clean
sudo make
sudo killall screen
sudo /etc/rc.local
I suggest you ask goxed to remote in. I could probably help as well. But Goxed seems to have the most skills.
I've spent the last 12 hours trying to get my bitfury 400 gigahash units up and running. I will send 1 BTC over to whoever gets me up and running. I'm thinking either the software isn't on my SD card image or somethings a miss. I have a nice amount of equipment in front of me and they are just sitting. It's not a psu issue as I have a bunch of 1250 psu's with other mboards and all are acting the same way. They aren't hashing so its not hardware related. I'm also running just 1 card in the first slot closest to the raspberry pi to rule out communication issues.
What I want is an SD IMAGE of the newest bitfury chainminer v 3. I want it already on the sd card along with bfminer. I'll take the image you provide and copy it to a new Sandisk class 10 SD card via windows. Then I'll insert it into my raspberry pi on my bitfury unit. What I'd like to do is SSH into my raspberry pi via putty. Then all I have to do is type in the info that you provide to get me up and running. This way if I can chose if I want to run chainminer or bfminer based off performance and stability. If you believe the cards are overclocked to high in the software, then downclock them a bit and I'll manually tune them up as time goes on. I have too many rigs just sitting here.
I've tried this from the bifury link
https://bitcointalksearch.org/topic/guide-bitfury-miner-supporttuning-287590
cd /opt/bitfury/chainminer
sudo make clean
sudo make
sudo killall screen
sudo /etc/rc.local
What I want is an SD IMAGE of the newest bitfury chainminer v 3. I want it already on the sd card along with bfminer. I'll take the image you provide and copy it to a new Sandisk class 10 SD card via windows. Then I'll insert it into my raspberry pi on my bitfury unit. What I'd like to do is SSH into my raspberry pi via putty. Then all I have to do is type in the info that you provide to get me up and running. This way if I can chose if I want to run chainminer or bfminer based off performance and stability. If you believe the cards are overclocked to high in the software, then downclock them a bit and I'll manually tune them up as time goes on. I have too many rigs just sitting here.
I've tried this from the bifury link
https://bitcointalksearch.org/topic/guide-bitfury-miner-supporttuning-287590
cd /opt/bitfury/chainminer
sudo make clean
sudo make
sudo killall screen
sudo /etc/rc.local
Jump to: