1070: How to get maximum hashrate without OC?

iamnewhere

full member

Activity: 168

Merit: 100

Quote from: Cereberus on July 03, 2017, 10:44:50 AM

I am afraid there isn't. I have overclocked my Gigabyte GTX 1070 to plus 1000 memory and plus 250 core clock, it is a stable to almost 31 mhash. It can be done through the MSI afterburner. If you are afraid of shortening your graphic card life, don't be, Nvidia is well known for running overclocked for a lot of time without problems. When you reach 6+ mhash with overclock for 4 cards that you have is like having a 5th card mining for you so it is really worth it.

try minus 250 core clock and put down the TDP limit - you will get the same mhash with lower power consumption Wink

RamaLo

newbie

Activity: 8

Merit: 0

You need to make some tests here.
I'm running 2x1070 with:
- TDP: 65%
- GPU: -200MHz
- MEM: +750MHz
Getting around 31-32MH/s from each of them (reported by the pool).

Afaik, for ETH only the MEM OC counts, I have seen 1070 cards downclocked to -400 on the GPU without any negative effect to the hashrate.

QuintLeo

legendary

Activity: 1498

Merit: 1030

For ETH mining, you want to OC the memory and can probably reduce the core clock a bit AND reduce TDP some.

Increasing core clock on ETH doesn't give much if better results.

Also, WHICH GTX 1070 model do you have? The "base" TDP is only 150 watts on the 1070, though a few aftermarket cards get as high as 230.

AtomicDog602

newbie

Activity: 15

Merit: 0

Quote from: antonio2234 on July 03, 2017, 02:09:18 PM

The problem is my power limitation. I have 1000w Cooler Master Gold 80+ (with 4×1070) and at this power I cant overclock.

No way. At the most you would probably pull 650W at the wall ...unless you are running other peripherals I am unaware of.

I highly suggest getting a kill-a-watt meter from Amazon or newegg or wherever. You can find them around $20 and well worth it. I have one on each mining rig to monitor my power consumption.

ps. a little while ago I called evga about their power supplies, and asked Jose from EVGA how much can I pull constantly from the supply safely. He suggested 80% of max rating. Going my that theory, you could safely pull 800W constant without worry.

Ambros

hero member

Activity: 653

Merit: 500

Quote from: antonio2234 on July 03, 2017, 02:09:18 PM

The problem is my power limitation. I have 1000w Cooler Master Gold 80+ (with 4×1070) and at this power I cant overclock.

I am running rigs with 4 of them with 850W psu without any problem.
Reudce the power limit when you overlock and you are just fine

antonio2234

member

Activity: 95

Merit: 10

The problem is my power limitation. I have 1000w Cooler Master Gold 80+ (with 4×1070) and at this power I cant overclock.

Ambros

hero member

Activity: 653

Merit: 500

Maybe you are asking becasue you have read about timings editing on AMD cards, there is no such thing for nvidia, or at least I am not aware of it.

Anyway you can overclock safely without losing your warrantly or deal with problems. Just use the slided in MSI afterburned and enjoy extra mhash

Heimer

sr. member

Activity: 518

Merit: 250

Shortening lifespan is myth. Even if this is true you wont notice this (I assume, that you will sell GPUs when mining wont be profitable)

AtomicDog602

newbie

Activity: 15

Merit: 0

Quote from: philipma1957 on July 03, 2017, 10:54:26 AM

Quote from: antonio2234 on July 03, 2017, 10:42:04 AM

Hi,

I have 4x1070 8GB OC:
miner: Clymore 9.6
Windows 10 64

Current hashrate for each card is 25Mh/s and very stable.
I want to know is there any way to increase hashpower without overclocking?

you can lower watts used

load msi afternurner 4.3

set tdp to 80%

leave core at 0
leave ram/mem at 0
set fan to 70% manual

hash should stay the same but power usage will drop.

You should be able to overclock the memory still, and maybe even bump up the core clock if your card has good cooling. At 80% it will throttle the core possibly to keep power down ac necessary. I run my 1070 at 65% with +50 core and +230 memory in afterburner. Much of the time the core throttles down to 1810, but it is there just in case. The 1070s run at 55c and only use about 105 watts. I have played with power settings so much. I ended up having to tweak that low to conserve wattage draw.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: antonio2234 on July 03, 2017, 10:42:04 AM

Hi,

I have 4x1070 8GB OC:
miner: Clymore 9.6
Windows 10 64

Current hashrate for each card is 25Mh/s and very stable.
I want to know is there any way to increase hashpower without overclocking?

you can lower watts used

load msi afternurner 4.3

set tdp to 80%

leave core at 0
leave ram/mem at 0
set fan to 70% manual

hash should stay the same but power usage will drop.

CloudbaseJ

newbie

Activity: 36

Merit: 0

buy 2 more

Cereberus

legendary

Activity: 910

Merit: 1000

Quote from: antonio2234 on July 03, 2017, 10:42:04 AM

Hi,

I have 4x1070 8GB OC:
miner: Clymore 9.6
Windows 10 64

Current hashrate for each card is 25Mh/s and very stable.
I want to know is there any way to increase hashpower without overclocking?

I am afraid there isn't. I have overclocked my Gigabyte GTX 1070 to plus 1000 memory and plus 250 core clock, it is a stable to almost 31 mhash. It can be done through the MSI afterburner. If you are afraid of shortening your graphic card life, don't be, Nvidia is well known for running overclocked for a lot of time without problems. When you reach 6+ mhash with overclock for 4 cards that you have is like having a 5th card mining for you so it is really worth it.

antonio2234

member

Activity: 95

Merit: 10

Hi,

I have 4x1070 8GB OC:
miner: Clymore 9.6
Windows 10 64

Current hashrate for each card is 25Mh/s and very stable.
I want to know is there any way to increase hashpower without overclocking?

Topic: 1070: How to get maximum hashrate without OC? (Read 1102 times)