Thanks CarlOrff!
Do you use MSI's Afterburner or ASUS' GPU Tweak II or something else to change the settings?
Topic: 1080Ti settings (Read 61 times)
Hello all, first post here.
I have an ASUS 1080Ti, with the following settings on ASUS GPU Tweak:
GPU clock boost: +174 (1754 MHz)
GPU voltage: 0%
Memory Clock: +458 (11498 MHz)
Fan Speed: Auto
Power target: 68%
Gives 1.45 to 1.55 MH/s on neoscrypt on nicehash, 225 W measured at the wall (65 W is used by the whole computer anyway when not mining, ie sitting idle).
Despite the settings the GPU clock never goes above 1506 MHz and the Memory clock is fixed at 10498MHz.
Can anyone suggest different/better settings? Should I tamper with the GPU clock/Voltage curve?
Thanks in advance for any suggestions.
My best settings for GTX 1080Ti is not so far from yours :I have an ASUS 1080Ti, with the following settings on ASUS GPU Tweak:
GPU clock boost: +174 (1754 MHz)
GPU voltage: 0%
Memory Clock: +458 (11498 MHz)
Fan Speed: Auto
Power target: 68%
Gives 1.45 to 1.55 MH/s on neoscrypt on nicehash, 225 W measured at the wall (65 W is used by the whole computer anyway when not mining, ie sitting idle).
Despite the settings the GPU clock never goes above 1506 MHz and the Memory clock is fixed at 10498MHz.
Can anyone suggest different/better settings? Should I tamper with the GPU clock/Voltage curve?
Thanks in advance for any suggestions.
Power target : 178 W (but the card only use 143 W at this target)
GPU : + 178 MHz
Memory : + 400 MHz
Fan speed auto
Temp : 61°C
642 sol/s EquiHash and 4,52 sol/W (Linux)
Marvellous GPU :-).
Hello all, first post here.
I have an ASUS 1080Ti, with the following settings on ASUS GPU Tweak:
GPU clock boost: +174 (1754 MHz)
GPU voltage: 0%
Memory Clock: +458 (11498 MHz)
Fan Speed: Auto
Power target: 68%
Gives 1.45 to 1.55 MH/s on neoscrypt on nicehash, 225 W measured at the wall (65 W is used by the whole computer anyway when not mining, ie sitting idle).
Despite the settings the GPU clock never goes above 1506 MHz and the Memory clock is fixed at 10498MHz.
Can anyone suggest different/better settings? Should I tamper with the GPU clock/Voltage curve?
Thanks in advance for any suggestions.
I have an ASUS 1080Ti, with the following settings on ASUS GPU Tweak:
GPU clock boost: +174 (1754 MHz)
GPU voltage: 0%
Memory Clock: +458 (11498 MHz)
Fan Speed: Auto
Power target: 68%
Gives 1.45 to 1.55 MH/s on neoscrypt on nicehash, 225 W measured at the wall (65 W is used by the whole computer anyway when not mining, ie sitting idle).
Despite the settings the GPU clock never goes above 1506 MHz and the Memory clock is fixed at 10498MHz.
Can anyone suggest different/better settings? Should I tamper with the GPU clock/Voltage curve?
Thanks in advance for any suggestions.
Jump to: