By the way, it was not your fault, rather AMD's
Topic: 12 GPU RX580 rig driving me crazy - miner cannor start (Read 123 times)
You are welcome.
By the way, it was not your fault, rather AMD's
By the way, it was not your fault, rather AMD's
I feel an idiot....thank you, it works now. Really really thank you! 
No, you didn't post in the right place
Anyway, try this one too: Set ULPS and crossfire registry entries for your gpus to zero (disabled). Just google it ... check this for the starter
Anyway, try this one too: Set ULPS and crossfire registry entries for your gpus to zero (disabled). Just google it ... check this for the starter
Hallo everybody, hoping I posted in the right place, I m setting up my fifth rx580 (sapphire8gb) 12gpu rig (ETH), so let s say I m not a beginner, but I swear you, this one is driving me crazy withouth any logic explanation. So I beg you, if you had similar problem, let me see the light at the end of the tunnel providing a solution.
Hardware:
Cpu: i3 7gen
Ram: 2x4Gb Hyperx
Mobo: Asrock H110PRO
HD: 128GB SSD
GPU: 12xSapphire rx580 8gb (both Hinyx and micron memory)
PSU: 2XCorsair HX1200i
SW:
WIN 10
Claymore 11.6 (other rigs are running with this version perfectly)
GPU drivers: adrenalin 18.1.4 (other rigs are running with this version perfectly)
Let me say that before post this help request I tried everything: changed HD, changed ram, changed PSU, changed CPU, risers, USB cables, reinstalled win10, tried different claymore versions, tried adrenalin 18.6 drivers but nothing worked and the result is always the same:
I install the first gpu, everything works, then the second, the third, the fourth (here the computer starts to become slow, even if I put porposely the i3, in the others i ve just a celeron) then all the sapphire lights of installed gpus are off (that s weird). I start claymore and takes 1/2 mins to see the gpus, the lights on them come on and it starts mining (still no tweak, no bios mod, no nothing).
I continue this way with 5gpu, 6gpu. PC always more slow...
For some reasone the rig looks like a xmas trees, sappire lights come on and off with no explication and withouth I m doing nothing.
I continue this "trip" till the 12th Gpu. Start claymore but nothing happen, after 5min it tries to restart with the usual error "miner cannot restart...."
(virtual memory is set correctly, min 64K)
If you have any suggestion I d appreciate a lor.
Thank you
Hardware:
Cpu: i3 7gen
Ram: 2x4Gb Hyperx
Mobo: Asrock H110PRO
HD: 128GB SSD
GPU: 12xSapphire rx580 8gb (both Hinyx and micron memory)
PSU: 2XCorsair HX1200i
SW:
WIN 10
Claymore 11.6 (other rigs are running with this version perfectly)
GPU drivers: adrenalin 18.1.4 (other rigs are running with this version perfectly)
Let me say that before post this help request I tried everything: changed HD, changed ram, changed PSU, changed CPU, risers, USB cables, reinstalled win10, tried different claymore versions, tried adrenalin 18.6 drivers but nothing worked and the result is always the same:
I install the first gpu, everything works, then the second, the third, the fourth (here the computer starts to become slow, even if I put porposely the i3, in the others i ve just a celeron) then all the sapphire lights of installed gpus are off (that s weird). I start claymore and takes 1/2 mins to see the gpus, the lights on them come on and it starts mining (still no tweak, no bios mod, no nothing).
I continue this way with 5gpu, 6gpu. PC always more slow...
For some reasone the rig looks like a xmas trees, sappire lights come on and off with no explication and withouth I m doing nothing.
I continue this "trip" till the 12th Gpu. Start claymore but nothing happen, after 5min it tries to restart with the usual error "miner cannot restart...."
(virtual memory is set correctly, min 64K)
If you have any suggestion I d appreciate a lor.
Thank you
Jump to: