Thank you for everyone who helped, it seems at the end the problem was at my "landlord's" part. It seems that connecting the other miner caused uneven power draw to the system, which in return caused the miners to continuously restart.
Today we were able to sort things out,and it seems the problem has been solved.
Thanks again for everyone who helped,and sorry, i would've never imagined there could be some power issue with the provider.
Topic: 2 different antminer S9s wont mine on the same network (Read 222 times)
Would suggest resetting the miners to factory firmware. There are 4 techniques, but only one works if your already running 2019 firmware:
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery
On most of the machines I've done this on, the MAC has changed and my DHCP server has issued a new IP address. After that, you might want to upload newer firmware of your choice. Don't forget your will need to re-configure after resetting.
https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery
On most of the machines I've done this on, the MAC has changed and my DHCP server has issued a new IP address. After that, you might want to upload newer firmware of your choice. Don't forget your will need to re-configure after resetting.
I might need a couple of days to access the miners, I'll post my findings here asap!
Thank you!
Thank you!
I'm sorry i didn't mention it because i was unaware, DO NOT upgrade any Antminer firmware to 2019 version, as this kills SSH access.
I might need a couple of days to access the miners, I'll post my findings here asap!
Thank you!
Thank you!
Both have static IP which are different of course. So that can't happen that they are trying to connect to the same.
Can you take a look at the MAC address of each? (HWaddr value when you use ifconfig after logging via ssh). Can you post more details of your network configuration?
I can't find any issue from the first kernel logs but for 2nd kernel logs it looks like it doesn't detect the fan properly.
The fan pwm shows zero compared to the first kernel logs.
Can you try to hard reset them first and test it again? Follow the guide from here How to reset miner to factory settings forget the 2. Restore via software and do 1 and 3 after that setup pool then reboot the miner and let them run at dynamic IP.
Also, run the 2nd miner(inactive one) for 20 minutes to generate enough logs so that we can find more about the 2nd miner.
The fan pwm shows zero compared to the first kernel logs.
Can you try to hard reset them first and test it again? Follow the guide from here How to reset miner to factory settings forget the 2. Restore via software and do 1 and 3 after that setup pool then reboot the miner and let them run at dynamic IP.
Also, run the 2nd miner(inactive one) for 20 minutes to generate enough logs so that we can find more about the 2nd miner.
So,I have a very interesting problem.
I've ordered two used S9 antminers, set it up at home, ran both of them for 30-35 mintues(after each other,not at the same time) and after it i went to my mining storage, plugged in the two new miners, and after 5-10 minutes either of them is mining.
BUT
if i restart only 1-doesnt matter which one- it will mine without a hitch until i restart the other one as well and it starts mining. Then both them goes to "0ghs".
I've got 10 gpu rigs and 8 other antminers on this setup, so i dont think it should be a network connectivity problem,but im waiting for any suggestions if have!
the kernel of the one that currently mines
and the kernel of the one thats currently inactive
Both have static IP which are different of course. So that can't happen that they are trying to connect to the same.
I've ordered two used S9 antminers, set it up at home, ran both of them for 30-35 mintues(after each other,not at the same time) and after it i went to my mining storage, plugged in the two new miners, and after 5-10 minutes either of them is mining.
BUT
if i restart only 1-doesnt matter which one- it will mine without a hitch until i restart the other one as well and it starts mining. Then both them goes to "0ghs".
I've got 10 gpu rigs and 8 other antminers on this setup, so i dont think it should be a network connectivity problem,but im waiting for any suggestions if have!
the kernel of the one that currently mines
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000298] ps7-ttc #0 at df804000, irq=43
[ 0.000594] Console: colour dummy device 80x30
[ 0.000623] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040197] pid_max: default: 32768 minimum: 301
[ 0.040407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040426] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042528] CPU: Testing write buffer coherency: ok
[ 0.042848] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042905] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043124] L310 cache controller enabled
[ 0.043144] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120989] CPU1: Booted secondary processor
[ 0.210220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210351] Brought up 2 CPUs
[ 0.210370] SMP: Total of 2 processors activated.
[ 0.210378] CPU: All CPU(s) started in SVC mode.
[ 0.211035] devtmpfs: initialized
[ 0.213425] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214615] regulator-dummy: no parameters
[ 0.221603] NET: Registered protocol family 16
[ 0.223835] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226109] cpuidle: using governor ladder
[ 0.226122] cpuidle: using governor menu
[ 0.233510] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235024] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235038] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235152] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.256708] bio: create slab at 0
[ 0.258108] vgaarb: loaded
[ 0.258793] SCSI subsystem initialized
[ 0.259694] usbcore: registered new interface driver usbfs
[ 0.259864] usbcore: registered new interface driver hub
[ 0.260099] usbcore: registered new device driver usb
[ 0.260722] media: Linux media interface: v0.10
[ 0.260880] Linux video capture interface: v2.00
[ 0.261268] pps_core: LinuxPPS API ver. 1 registered
[ 0.261280] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.261416] PTP clock support registered
[ 0.261777] EDAC MC: Ver: 3.0.0
[ 0.262812] Advanced Linux Sound Architecture Driver Initialized.
[ 0.265535] DMA-API: preallocated 4096 debug entries
[ 0.265549] DMA-API: debugging enabled by kernel config
[ 0.265623] Switched to clocksource arm_global_timer
[ 0.286543] NET: Registered protocol family 2
[ 0.287196] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287253] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287339] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287380] TCP: reno registered
[ 0.287397] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287429] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287661] NET: Registered protocol family 1
[ 0.287996] RPC: Registered named UNIX socket transport module.
[ 0.288008] RPC: Registered udp transport module.
[ 0.288016] RPC: Registered tcp transport module.
[ 0.288025] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288037] PCI: CLS 0 bytes, default 64
[ 0.288463] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290450] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292504] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.292703] msgmni has been set to 967
[ 0.293470] io scheduler noop registered
[ 0.293483] io scheduler deadline registered
[ 0.293527] io scheduler cfq registered (default)
[ 0.303806] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.303826] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.430323] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.998550] console [ttyPS0] enabled
[ 1.002806] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.010426] [drm] Initialized drm 1.1.0 20060810
[ 1.027471] brd: module loaded
[ 1.036807] loop: module loaded
[ 1.046572] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.052324] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.060364] libphy: XEMACPS mii bus: probed
[ 1.064737] ------------- phy_id = 0x3625e62
[ 1.069515] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.078161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084779] ehci-pci: EHCI PCI platform driver
[ 1.092019] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.098897] usbcore: registered new interface driver usb-storage
[ 1.105783] mousedev: PS/2 mouse device common for all mice
[ 1.111856] i2c /dev entries driver
[ 1.118807] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.124297] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.130203] Xilinx Zynq CpuIdle Driver started
[ 1.135029] sdhci: Secure Digital Host Controller Interface driver
[ 1.141168] sdhci: Copyright(c) Pierre Ossman
[ 1.145460] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.152337] mmc0: no vqmmc regulator found
[ 1.156374] mmc0: no vmmc regulator found
[ 1.195649] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.204310] usbcore: registered new interface driver usbhid
[ 1.209816] usbhid: USB HID core driver
[ 1.214531] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.220830] nand: Micron MT29F2G08ABAEAWP
[ 1.224798] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.230728] Bad block table found at page 131008, version 0x01
[ 1.236944] Bad block table found at page 130944, version 0x01
[ 1.242997] 3 ofpart partitions found on MTD device pl353-nand
[ 1.248777] Creating 3 MTD partitions on "pl353-nand":
[ 1.253871] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.261928] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.269248] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.278167] TCP: cubic registered
[ 1.281401] NET: Registered protocol family 17
[ 1.286109] Registering SWP/SWPB emulation handler
[ 1.291979] regulator-dummy: disabling
[ 1.296292] UBI: attaching mtd1 to ubi0
[ 1.820754] UBI: scanning is finished
[ 1.832353] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.839429] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.846191] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.852856] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.859733] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.865714] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.872821] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1651234461
[ 1.881864] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.891081] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.891086] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.894963] ALSA device list:
[ 1.894967] No soundcards found.
[ 1.911429] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.940370] UBIFS: recovery needed
[ 2.071854] UBIFS: recovery completed
[ 2.075542] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.081489] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.090594] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.100483] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.105513] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B350FC37-87E4-4432-B675-02CB4553C3FF, small LPT model
[ 2.116803] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.123968] devtmpfs: mounted
[ 2.127096] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.957289] random: dd urandom read with 0 bits of entropy available
[ 3.345664]
[ 3.345664] bcm54xx_config_init
[ 3.955669]
[ 3.955669] bcm54xx_config_init
[ 6.956501] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.962591] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.419501] In axi fpga driver!
[ 21.422566] request_mem_region OK!
[ 21.425987] AXI fpga dev virtual address is 0xdf9fc000
[ 21.431064] *base_vir_addr = 0xc51a
[ 21.446134] In fpga mem driver!
[ 21.449204] request_mem_region OK!
[ 21.452767] fpga mem virtual address is 0xe2000000
[ 22.255649]
[ 22.255649] bcm54xx_config_init
[ 22.955672]
[ 22.955672] bcm54xx_config_init
[ 25.956487] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 25.962506] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 162.306818] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0000c51a
miner ID : 804034487600881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[14] has core num=1
Chain[5] ASIC[43] has core num=2
Chain[5] ASIC[52] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[5] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[61] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1367 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Nov 6 17:17:48 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 804034487600881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=4320
get fan[5] speed=4440
get fan[4] speed=4320
get fan[5] speed=4440
get fan[4] speed=4320
get fan[5] speed=4440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[14] has core num=1
Chain[J6] ASIC[43] has core num=2
Chain[J6] ASIC[52] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[5] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[61] has core num=1
miner total rate=13634GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637
max freq = 637
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:27 remote:30 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:26 remote:29 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:27 remote:30 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4529 voltage limit=890 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 890
single board rate=4531 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
single board rate=4574 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25875
last_nonce_num:28761
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25912
last_nonce_num:35854
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:47532
last_nonce_num:43008
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=172 total_tv_end_sys=173
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.6150 Asic[02]=74.1040 Asic[03]=73.0470 Asic[04]=70.5640 Asic[05]=68.9710 Asic[06]=68.5340 Asic[07]=76.3360 Asic[08]=71.0170
Asic[09]=68.6850 Asic[10]=71.3190 Asic[11]=73.9700 Asic[12]=71.5710 Asic[13]=72.3430 Asic[14]=67.7290 Asic[15]=73.7520 Asic[16]=74.0210
Asic[17]=75.4470 Asic[18]=72.0580 Asic[19]=73.5840 Asic[20]=72.2090 Asic[21]=74.7250 Asic[22]=71.9070 Asic[23]=71.6050 Asic[24]=72.4100
Asic[25]=77.6950 Asic[26]=66.2860 Asic[27]=72.4770 Asic[28]=73.0980 Asic[29]=69.9270 Asic[30]=68.5850 Asic[31]=72.7960 Asic[32]=75.7490
Asic[33]=74.6410 Asic[34]=71.8230 Asic[35]=74.6580 Asic[36]=74.2890 Asic[37]=69.0380 Asic[38]=72.3600 Asic[39]=70.4130 Asic[40]=75.5810
Asic[41]=72.4440 Asic[42]=70.7150 Asic[43]=72.6780 Asic[44]=70.9170 Asic[45]=72.1080 Asic[46]=70.2790 Asic[47]=69.5910 Asic[48]=73.2660
Asic[49]=68.4170 Asic[50]=70.7150 Asic[51]=71.0680 Asic[52]=74.6750 Asic[53]=68.0140 Asic[54]=73.1310 Asic[55]=72.4440 Asic[56]=75.2120
Asic[57]=73.3330 Asic[58]=66.1690 Asic[59]=73.5840 Asic[60]=73.6510 Asic[61]=70.0950 Asic[62]=69.1220 Asic[63]=73.2320
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=69.0210 Asic[02]=73.7520 Asic[03]=72.9300 Asic[04]=67.1250 Asic[05]=69.5080 Asic[06]=82.3920 Asic[07]=69.3060 Asic[08]=72.8130
Asic[09]=73.1480 Asic[10]=74.4060 Asic[11]=73.7690 Asic[12]=71.1350 Asic[13]=64.8600 Asic[14]=71.6210 Asic[15]=69.1890 Asic[16]=70.7320
Asic[17]=68.7690 Asic[18]=74.0370 Asic[19]=70.1950 Asic[20]=74.9600 Asic[21]=72.4940 Asic[22]=72.2760 Asic[23]=66.9410 Asic[24]=69.6250
Asic[25]=64.3570 Asic[26]=72.5950 Asic[27]=72.3430 Asic[28]=70.8500 Asic[29]=72.2760 Asic[30]=67.7460 Asic[31]=73.9530 Asic[32]=74.1380
Asic[33]=67.0920 Asic[34]=73.8190 Asic[35]=72.4270 Asic[36]=69.3730 Asic[37]=69.0880 Asic[38]=74.0040 Asic[39]=71.3700 Asic[40]=70.2620
Asic[41]=78.7180 Asic[42]=75.3290 Asic[43]=70.8500 Asic[44]=69.0210 Asic[45]=70.8660 Asic[46]=71.7720 Asic[47]=71.2860 Asic[48]=71.8400
Asic[49]=69.4070 Asic[50]=70.3970 Asic[51]=72.1420 Asic[52]=69.3060 Asic[53]=69.6590 Asic[54]=72.0240 Asic[55]=75.0940 Asic[56]=73.3830
Asic[57]=70.7660 Asic[58]=76.7550 Asic[59]=78.4500 Asic[60]=75.2960 Asic[61]=72.5780 Asic[62]=71.6720 Asic[63]=77.0240
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=71.7890 Asic[02]=68.9370 Asic[03]=75.0270 Asic[04]=72.9800 Asic[05]=70.6480 Asic[06]=66.1520 Asic[07]=72.4270 Asic[08]=77.4930
Asic[09]=73.8360 Asic[10]=67.9470 Asic[11]=69.1550 Asic[12]=68.7690 Asic[13]=70.6480 Asic[14]=74.5910 Asic[15]=77.0740 Asic[16]=74.7080
Asic[17]=77.1580 Asic[18]=69.6250 Asic[19]=73.7020 Asic[20]=76.1510 Asic[21]=70.2620 Asic[22]=71.0680 Asic[23]=72.4770 Asic[24]=76.4200
Asic[25]=72.8800 Asic[26]=74.8760 Asic[27]=70.6150 Asic[28]=77.0570 Asic[29]=70.2790 Asic[30]=76.6380 Asic[31]=73.5340 Asic[32]=73.9870
Asic[33]=69.8090 Asic[34]=72.2760 Asic[35]=76.2350 Asic[36]=77.4430 Asic[37]=72.4440 Asic[38]=72.1920 Asic[39]=70.6320 Asic[40]=70.2790
Asic[41]=72.5610 Asic[42]=76.6380 Asic[43]=74.6580 Asic[44]=75.9670 Asic[45]=74.9770 Asic[46]=71.6890 Asic[47]=69.9270 Asic[48]=70.3970
Asic[49]=67.7120 Asic[50]=74.9770 Asic[51]=72.2250 Asic[52]=71.5210 Asic[53]=75.7150 Asic[54]=74.5570 Asic[55]=75.0100 Asic[56]=74.9270
Asic[57]=71.6890 Asic[58]=72.7790 Asic[59]=71.6380 Asic[60]=70.9170 Asic[61]=66.0010 Asic[62]=73.2490 Asic[63]=73.1650
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=47
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=56
Chain[6] Chip[62] middle Temp=44
Special fix Chain[6] Chip[62] middle Temp = 71
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=59
Chain[7] Chip[62] middle Temp=49
Special fix Chain[7] Chip[62] middle Temp = 74
Done read temp on Chain[7]
set FAN speed according to: temp_highest=60 temp_top1[PWM_T]=60 temp_top1[TEMP_POS_LOCAL]=60 temp_change=0 fix_fan_steps=0
FAN PWM: 70
read_temp_func Done!
CRC error counter=0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000298] ps7-ttc #0 at df804000, irq=43
[ 0.000594] Console: colour dummy device 80x30
[ 0.000623] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040197] pid_max: default: 32768 minimum: 301
[ 0.040407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040426] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042528] CPU: Testing write buffer coherency: ok
[ 0.042848] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042905] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043124] L310 cache controller enabled
[ 0.043144] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120989] CPU1: Booted secondary processor
[ 0.210220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210351] Brought up 2 CPUs
[ 0.210370] SMP: Total of 2 processors activated.
[ 0.210378] CPU: All CPU(s) started in SVC mode.
[ 0.211035] devtmpfs: initialized
[ 0.213425] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214615] regulator-dummy: no parameters
[ 0.221603] NET: Registered protocol family 16
[ 0.223835] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226109] cpuidle: using governor ladder
[ 0.226122] cpuidle: using governor menu
[ 0.233510] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235024] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235038] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235152] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.256708] bio: create slab
[ 0.258108] vgaarb: loaded
[ 0.258793] SCSI subsystem initialized
[ 0.259694] usbcore: registered new interface driver usbfs
[ 0.259864] usbcore: registered new interface driver hub
[ 0.260099] usbcore: registered new device driver usb
[ 0.260722] media: Linux media interface: v0.10
[ 0.260880] Linux video capture interface: v2.00
[ 0.261268] pps_core: LinuxPPS API ver. 1 registered
[ 0.261280] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.261416] PTP clock support registered
[ 0.261777] EDAC MC: Ver: 3.0.0
[ 0.262812] Advanced Linux Sound Architecture Driver Initialized.
[ 0.265535] DMA-API: preallocated 4096 debug entries
[ 0.265549] DMA-API: debugging enabled by kernel config
[ 0.265623] Switched to clocksource arm_global_timer
[ 0.286543] NET: Registered protocol family 2
[ 0.287196] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287253] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287339] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287380] TCP: reno registered
[ 0.287397] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287429] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287661] NET: Registered protocol family 1
[ 0.287996] RPC: Registered named UNIX socket transport module.
[ 0.288008] RPC: Registered udp transport module.
[ 0.288016] RPC: Registered tcp transport module.
[ 0.288025] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288037] PCI: CLS 0 bytes, default 64
[ 0.288463] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290450] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292504] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.292703] msgmni has been set to 967
[ 0.293470] io scheduler noop registered
[ 0.293483] io scheduler deadline registered
[ 0.293527] io scheduler cfq registered (default)
[ 0.303806] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.303826] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.430323] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.998550] console [ttyPS0] enabled
[ 1.002806] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.010426] [drm] Initialized drm 1.1.0 20060810
[ 1.027471] brd: module loaded
[ 1.036807] loop: module loaded
[ 1.046572] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.052324] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.060364] libphy: XEMACPS mii bus: probed
[ 1.064737] ------------- phy_id = 0x3625e62
[ 1.069515] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.078161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084779] ehci-pci: EHCI PCI platform driver
[ 1.092019] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.098897] usbcore: registered new interface driver usb-storage
[ 1.105783] mousedev: PS/2 mouse device common for all mice
[ 1.111856] i2c /dev entries driver
[ 1.118807] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.124297] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.130203] Xilinx Zynq CpuIdle Driver started
[ 1.135029] sdhci: Secure Digital Host Controller Interface driver
[ 1.141168] sdhci: Copyright(c) Pierre Ossman
[ 1.145460] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.152337] mmc0: no vqmmc regulator found
[ 1.156374] mmc0: no vmmc regulator found
[ 1.195649] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.204310] usbcore: registered new interface driver usbhid
[ 1.209816] usbhid: USB HID core driver
[ 1.214531] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.220830] nand: Micron MT29F2G08ABAEAWP
[ 1.224798] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.230728] Bad block table found at page 131008, version 0x01
[ 1.236944] Bad block table found at page 130944, version 0x01
[ 1.242997] 3 ofpart partitions found on MTD device pl353-nand
[ 1.248777] Creating 3 MTD partitions on "pl353-nand":
[ 1.253871] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.261928] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.269248] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.278167] TCP: cubic registered
[ 1.281401] NET: Registered protocol family 17
[ 1.286109] Registering SWP/SWPB emulation handler
[ 1.291979] regulator-dummy: disabling
[ 1.296292] UBI: attaching mtd1 to ubi0
[ 1.820754] UBI: scanning is finished
[ 1.832353] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.839429] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.846191] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.852856] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.859733] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.865714] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.872821] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1651234461
[ 1.881864] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.891081] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.891086] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.894963] ALSA device list:
[ 1.894967] No soundcards found.
[ 1.911429] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.940370] UBIFS: recovery needed
[ 2.071854] UBIFS: recovery completed
[ 2.075542] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.081489] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.090594] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.100483] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.105513] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B350FC37-87E4-4432-B675-02CB4553C3FF, small LPT model
[ 2.116803] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.123968] devtmpfs: mounted
[ 2.127096] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.957289] random: dd urandom read with 0 bits of entropy available
[ 3.345664]
[ 3.345664] bcm54xx_config_init
[ 3.955669]
[ 3.955669] bcm54xx_config_init
[ 6.956501] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.962591] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.419501] In axi fpga driver!
[ 21.422566] request_mem_region OK!
[ 21.425987] AXI fpga dev virtual address is 0xdf9fc000
[ 21.431064] *base_vir_addr = 0xc51a
[ 21.446134] In fpga mem driver!
[ 21.449204] request_mem_region OK!
[ 21.452767] fpga mem virtual address is 0xe2000000
[ 22.255649]
[ 22.255649] bcm54xx_config_init
[ 22.955672]
[ 22.955672] bcm54xx_config_init
[ 25.956487] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 25.962506] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 162.306818] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0000c51a
miner ID : 804034487600881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[14] has core num=1
Chain[5] ASIC[43] has core num=2
Chain[5] ASIC[52] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[5] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[61] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1367 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Nov 6 17:17:48 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 804034487600881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=4320
get fan[5] speed=4440
get fan[4] speed=4320
get fan[5] speed=4440
get fan[4] speed=4320
get fan[5] speed=4440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[14] has core num=1
Chain[J6] ASIC[43] has core num=2
Chain[J6] ASIC[52] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[5] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[61] has core num=1
miner total rate=13634GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637
max freq = 637
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:27 remote:30 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:26 remote:29 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:27 remote:30 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4529 voltage limit=890 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 890
single board rate=4531 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
single board rate=4574 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25875
last_nonce_num:28761
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25912
last_nonce_num:35854
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:47532
last_nonce_num:43008
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=172 total_tv_end_sys=173
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.6150 Asic[02]=74.1040 Asic[03]=73.0470 Asic[04]=70.5640 Asic[05]=68.9710 Asic[06]=68.5340 Asic[07]=76.3360 Asic[08]=71.0170
Asic[09]=68.6850 Asic[10]=71.3190 Asic[11]=73.9700 Asic[12]=71.5710 Asic[13]=72.3430 Asic[14]=67.7290 Asic[15]=73.7520 Asic[16]=74.0210
Asic[17]=75.4470 Asic[18]=72.0580 Asic[19]=73.5840 Asic[20]=72.2090 Asic[21]=74.7250 Asic[22]=71.9070 Asic[23]=71.6050 Asic[24]=72.4100
Asic[25]=77.6950 Asic[26]=66.2860 Asic[27]=72.4770 Asic[28]=73.0980 Asic[29]=69.9270 Asic[30]=68.5850 Asic[31]=72.7960 Asic[32]=75.7490
Asic[33]=74.6410 Asic[34]=71.8230 Asic[35]=74.6580 Asic[36]=74.2890 Asic[37]=69.0380 Asic[38]=72.3600 Asic[39]=70.4130 Asic[40]=75.5810
Asic[41]=72.4440 Asic[42]=70.7150 Asic[43]=72.6780 Asic[44]=70.9170 Asic[45]=72.1080 Asic[46]=70.2790 Asic[47]=69.5910 Asic[48]=73.2660
Asic[49]=68.4170 Asic[50]=70.7150 Asic[51]=71.0680 Asic[52]=74.6750 Asic[53]=68.0140 Asic[54]=73.1310 Asic[55]=72.4440 Asic[56]=75.2120
Asic[57]=73.3330 Asic[58]=66.1690 Asic[59]=73.5840 Asic[60]=73.6510 Asic[61]=70.0950 Asic[62]=69.1220 Asic[63]=73.2320
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=69.0210 Asic[02]=73.7520 Asic[03]=72.9300 Asic[04]=67.1250 Asic[05]=69.5080 Asic[06]=82.3920 Asic[07]=69.3060 Asic[08]=72.8130
Asic[09]=73.1480 Asic[10]=74.4060 Asic[11]=73.7690 Asic[12]=71.1350 Asic[13]=64.8600 Asic[14]=71.6210 Asic[15]=69.1890 Asic[16]=70.7320
Asic[17]=68.7690 Asic[18]=74.0370 Asic[19]=70.1950 Asic[20]=74.9600 Asic[21]=72.4940 Asic[22]=72.2760 Asic[23]=66.9410 Asic[24]=69.6250
Asic[25]=64.3570 Asic[26]=72.5950 Asic[27]=72.3430 Asic[28]=70.8500 Asic[29]=72.2760 Asic[30]=67.7460 Asic[31]=73.9530 Asic[32]=74.1380
Asic[33]=67.0920 Asic[34]=73.8190 Asic[35]=72.4270 Asic[36]=69.3730 Asic[37]=69.0880 Asic[38]=74.0040 Asic[39]=71.3700 Asic[40]=70.2620
Asic[41]=78.7180 Asic[42]=75.3290 Asic[43]=70.8500 Asic[44]=69.0210 Asic[45]=70.8660 Asic[46]=71.7720 Asic[47]=71.2860 Asic[48]=71.8400
Asic[49]=69.4070 Asic[50]=70.3970 Asic[51]=72.1420 Asic[52]=69.3060 Asic[53]=69.6590 Asic[54]=72.0240 Asic[55]=75.0940 Asic[56]=73.3830
Asic[57]=70.7660 Asic[58]=76.7550 Asic[59]=78.4500 Asic[60]=75.2960 Asic[61]=72.5780 Asic[62]=71.6720 Asic[63]=77.0240
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=71.7890 Asic[02]=68.9370 Asic[03]=75.0270 Asic[04]=72.9800 Asic[05]=70.6480 Asic[06]=66.1520 Asic[07]=72.4270 Asic[08]=77.4930
Asic[09]=73.8360 Asic[10]=67.9470 Asic[11]=69.1550 Asic[12]=68.7690 Asic[13]=70.6480 Asic[14]=74.5910 Asic[15]=77.0740 Asic[16]=74.7080
Asic[17]=77.1580 Asic[18]=69.6250 Asic[19]=73.7020 Asic[20]=76.1510 Asic[21]=70.2620 Asic[22]=71.0680 Asic[23]=72.4770 Asic[24]=76.4200
Asic[25]=72.8800 Asic[26]=74.8760 Asic[27]=70.6150 Asic[28]=77.0570 Asic[29]=70.2790 Asic[30]=76.6380 Asic[31]=73.5340 Asic[32]=73.9870
Asic[33]=69.8090 Asic[34]=72.2760 Asic[35]=76.2350 Asic[36]=77.4430 Asic[37]=72.4440 Asic[38]=72.1920 Asic[39]=70.6320 Asic[40]=70.2790
Asic[41]=72.5610 Asic[42]=76.6380 Asic[43]=74.6580 Asic[44]=75.9670 Asic[45]=74.9770 Asic[46]=71.6890 Asic[47]=69.9270 Asic[48]=70.3970
Asic[49]=67.7120 Asic[50]=74.9770 Asic[51]=72.2250 Asic[52]=71.5210 Asic[53]=75.7150 Asic[54]=74.5570 Asic[55]=75.0100 Asic[56]=74.9270
Asic[57]=71.6890 Asic[58]=72.7790 Asic[59]=71.6380 Asic[60]=70.9170 Asic[61]=66.0010 Asic[62]=73.2490 Asic[63]=73.1650
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=47
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=56
Chain[6] Chip[62] middle Temp=44
Special fix Chain[6] Chip[62] middle Temp = 71
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=59
Chain[7] Chip[62] middle Temp=49
Special fix Chain[7] Chip[62] middle Temp = 74
Done read temp on Chain[7]
set FAN speed according to: temp_highest=60 temp_top1[PWM_T]=60 temp_top1[TEMP_POS_LOCAL]=60 temp_change=0 fix_fan_steps=0
FAN PWM: 70
read_temp_func Done!
CRC error counter=0
and the kernel of the one thats currently inactive
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000305] ps7-ttc #0 at df804000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040204] pid_max: default: 32768 minimum: 301
[ 0.040427] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040447] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042640] CPU: Testing write buffer coherency: ok
[ 0.042984] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043044] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043263] L310 cache controller enabled
[ 0.043283] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121034] CPU1: Booted secondary processor
[ 0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210360] Brought up 2 CPUs
[ 0.210380] SMP: Total of 2 processors activated.
[ 0.210388] CPU: All CPU(s) started in SVC mode.
[ 0.211059] devtmpfs: initialized
[ 0.213498] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214747] regulator-dummy: no parameters
[ 0.223776] NET: Registered protocol family 16
[ 0.226048] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228362] cpuidle: using governor ladder
[ 0.228376] cpuidle: using governor menu
[ 0.235872] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237409] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237423] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237542] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259604] bio: create slab at 0
[ 0.261533] vgaarb: loaded
[ 0.262264] SCSI subsystem initialized
[ 0.263157] usbcore: registered new interface driver usbfs
[ 0.263337] usbcore: registered new interface driver hub
[ 0.263571] usbcore: registered new device driver usb
[ 0.264103] media: Linux media interface: v0.10
[ 0.264269] Linux video capture interface: v2.00
[ 0.264511] pps_core: LinuxPPS API ver. 1 registered
[ 0.264522] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264647] PTP clock support registered
[ 0.265005] EDAC MC: Ver: 3.0.0
[ 0.266068] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269041] DMA-API: preallocated 4096 debug entries
[ 0.269056] DMA-API: debugging enabled by kernel config
[ 0.269148] Switched to clocksource arm_global_timer
[ 0.290384] NET: Registered protocol family 2
[ 0.291070] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291128] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291213] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291260] TCP: reno registered
[ 0.291277] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291312] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291560] NET: Registered protocol family 1
[ 0.291933] RPC: Registered named UNIX socket transport module.
[ 0.291946] RPC: Registered udp transport module.
[ 0.291954] RPC: Registered tcp transport module.
[ 0.291963] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291976] PCI: CLS 0 bytes, default 64
[ 0.292444] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294510] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296668] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296869] msgmni has been set to 967
[ 0.297684] io scheduler noop registered
[ 0.297697] io scheduler deadline registered
[ 0.297740] io scheduler cfq registered (default)
[ 0.310840] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.310861] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.435665] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003899] console [ttyPS0] enabled
[ 1.008201] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015866] [drm] Initialized drm 1.1.0 20060810
[ 1.033073] brd: module loaded
[ 1.042529] loop: module loaded
[ 1.052335] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.058087] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.066172] libphy: XEMACPS mii bus: probed
[ 1.070884] ------------- phy_id = 0x3625e62
[ 1.075646] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.084500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.091213] ehci-pci: EHCI PCI platform driver
[ 1.098420] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.105241] usbcore: registered new interface driver usb-storage
[ 1.112145] mousedev: PS/2 mouse device common for all mice
[ 1.118235] i2c /dev entries driver
[ 1.125216] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130756] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.136646] Xilinx Zynq CpuIdle Driver started
[ 1.141550] sdhci: Secure Digital Host Controller Interface driver
[ 1.147646] sdhci: Copyright(c) Pierre Ossman
[ 1.152055] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158797] mmc0: no vqmmc regulator found
[ 1.162843] mmc0: no vmmc regulator found
[ 1.199164] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207842] usbcore: registered new interface driver usbhid
[ 1.213352] usbhid: USB HID core driver
[ 1.218073] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224372] nand: Micron MT29F2G08ABAEAWP
[ 1.228339] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234277] Bad block table found at page 131008, version 0x01
[ 1.240496] Bad block table found at page 130944, version 0x01
[ 1.246553] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252337] Creating 3 MTD partitions on "pl353-nand":
[ 1.257429] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265503] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272843] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281867] TCP: cubic registered
[ 1.285108] NET: Registered protocol family 17
[ 1.289835] Registering SWP/SWPB emulation handler
[ 1.295766] regulator-dummy: disabling
[ 1.300170] UBI: attaching mtd1 to ubi0
[ 1.826445] UBI: scanning is finished
[ 1.838118] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.845203] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851964] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858627] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865505] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871486] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878594] UBI: max/mean erase counter: 61/35, WL threshold: 4096, image sequence number: 1984962504
[ 1.887809] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.897025] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.897030] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.901117] ALSA device list:
[ 1.901121] No soundcards found.
[ 1.917495] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.982424] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.988353] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.997495] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.007372] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.012411] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 56FDF5FA-8D29-4AA7-95D4-1C2E28C7C4E9, small LPT model
[ 2.023969] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.031399] devtmpfs: mounted
[ 2.034510] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.884839] random: dd urandom read with 0 bits of entropy available
[ 3.279188]
[ 3.279188] bcm54xx_config_init
[ 3.889192]
[ 3.889192] bcm54xx_config_init
[ 6.890023] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.896111] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.387195] In axi fpga driver!
[ 21.390311] request_mem_region OK!
[ 21.393661] AXI fpga dev virtual address is 0xdf9fc000
[ 21.398765] *base_vir_addr = 0x8c510
[ 21.413789] In fpga mem driver!
[ 21.417041] request_mem_region OK!
[ 21.420628] fpga mem virtual address is 0xe2000000
[ 22.189178]
[ 22.189178] bcm54xx_config_init
[ 22.889162]
[ 22.889162] bcm54xx_config_init
[ 25.890027] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 25.896050] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 145.081139] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=108 value=880
Fix freq=650 Chain[6] voltage_pic=108 value=880
Fix freq=650 Chain[7] voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=650M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=650M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=650M
Chain[J8] has no core num in PIC
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:5 max freq=650
Chain:5 min freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650
max freq = 650
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:29 remote:32 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:29 remote:32 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:29 remote:32 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J7] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:29 remote:32 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:30 remote:33 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:30 remote:33 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=880 [108]
Chain[J8] set working voltage=880 [108]
setStartTimePoint total_tv_start_sys=71 total_tv_end_sys=72
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
get RT hashrate from Chain[6]: (asic index start from 1-63)
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=60
read failed on Chain[5] Chip[62] middle Temp old value:74
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=59
read failed on Chain[6] Chip[62] middle Temp old value:72
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[7] Chip[62] local Temp=62
read failed on Chain[7] Chip[62] middle Temp old value:75
Done read temp on Chain[7]
set FAN speed according to: temp_highest=75 temp_top1[PWM_T]=75 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=-35
FAN PWM: 0
read_temp_func Done!
CRC error counter=0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000305] ps7-ttc #0 at df804000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040204] pid_max: default: 32768 minimum: 301
[ 0.040427] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040447] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042640] CPU: Testing write buffer coherency: ok
[ 0.042984] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043044] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043263] L310 cache controller enabled
[ 0.043283] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121034] CPU1: Booted secondary processor
[ 0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210360] Brought up 2 CPUs
[ 0.210380] SMP: Total of 2 processors activated.
[ 0.210388] CPU: All CPU(s) started in SVC mode.
[ 0.211059] devtmpfs: initialized
[ 0.213498] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214747] regulator-dummy: no parameters
[ 0.223776] NET: Registered protocol family 16
[ 0.226048] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228362] cpuidle: using governor ladder
[ 0.228376] cpuidle: using governor menu
[ 0.235872] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237409] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237423] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237542] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259604] bio: create slab
[ 0.261533] vgaarb: loaded
[ 0.262264] SCSI subsystem initialized
[ 0.263157] usbcore: registered new interface driver usbfs
[ 0.263337] usbcore: registered new interface driver hub
[ 0.263571] usbcore: registered new device driver usb
[ 0.264103] media: Linux media interface: v0.10
[ 0.264269] Linux video capture interface: v2.00
[ 0.264511] pps_core: LinuxPPS API ver. 1 registered
[ 0.264522] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264647] PTP clock support registered
[ 0.265005] EDAC MC: Ver: 3.0.0
[ 0.266068] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269041] DMA-API: preallocated 4096 debug entries
[ 0.269056] DMA-API: debugging enabled by kernel config
[ 0.269148] Switched to clocksource arm_global_timer
[ 0.290384] NET: Registered protocol family 2
[ 0.291070] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291128] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291213] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291260] TCP: reno registered
[ 0.291277] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291312] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291560] NET: Registered protocol family 1
[ 0.291933] RPC: Registered named UNIX socket transport module.
[ 0.291946] RPC: Registered udp transport module.
[ 0.291954] RPC: Registered tcp transport module.
[ 0.291963] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291976] PCI: CLS 0 bytes, default 64
[ 0.292444] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294510] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296668] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296869] msgmni has been set to 967
[ 0.297684] io scheduler noop registered
[ 0.297697] io scheduler deadline registered
[ 0.297740] io scheduler cfq registered (default)
[ 0.310840] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.310861] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.435665] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003899] console [ttyPS0] enabled
[ 1.008201] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015866] [drm] Initialized drm 1.1.0 20060810
[ 1.033073] brd: module loaded
[ 1.042529] loop: module loaded
[ 1.052335] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.058087] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.066172] libphy: XEMACPS mii bus: probed
[ 1.070884] ------------- phy_id = 0x3625e62
[ 1.075646] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.084500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.091213] ehci-pci: EHCI PCI platform driver
[ 1.098420] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.105241] usbcore: registered new interface driver usb-storage
[ 1.112145] mousedev: PS/2 mouse device common for all mice
[ 1.118235] i2c /dev entries driver
[ 1.125216] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130756] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.136646] Xilinx Zynq CpuIdle Driver started
[ 1.141550] sdhci: Secure Digital Host Controller Interface driver
[ 1.147646] sdhci: Copyright(c) Pierre Ossman
[ 1.152055] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158797] mmc0: no vqmmc regulator found
[ 1.162843] mmc0: no vmmc regulator found
[ 1.199164] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207842] usbcore: registered new interface driver usbhid
[ 1.213352] usbhid: USB HID core driver
[ 1.218073] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224372] nand: Micron MT29F2G08ABAEAWP
[ 1.228339] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234277] Bad block table found at page 131008, version 0x01
[ 1.240496] Bad block table found at page 130944, version 0x01
[ 1.246553] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252337] Creating 3 MTD partitions on "pl353-nand":
[ 1.257429] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265503] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272843] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281867] TCP: cubic registered
[ 1.285108] NET: Registered protocol family 17
[ 1.289835] Registering SWP/SWPB emulation handler
[ 1.295766] regulator-dummy: disabling
[ 1.300170] UBI: attaching mtd1 to ubi0
[ 1.826445] UBI: scanning is finished
[ 1.838118] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.845203] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851964] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858627] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865505] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871486] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878594] UBI: max/mean erase counter: 61/35, WL threshold: 4096, image sequence number: 1984962504
[ 1.887809] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.897025] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.897030] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.901117] ALSA device list:
[ 1.901121] No soundcards found.
[ 1.917495] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.982424] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.988353] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.997495] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.007372] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.012411] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 56FDF5FA-8D29-4AA7-95D4-1C2E28C7C4E9, small LPT model
[ 2.023969] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.031399] devtmpfs: mounted
[ 2.034510] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.884839] random: dd urandom read with 0 bits of entropy available
[ 3.279188]
[ 3.279188] bcm54xx_config_init
[ 3.889192]
[ 3.889192] bcm54xx_config_init
[ 6.890023] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.896111] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.387195] In axi fpga driver!
[ 21.390311] request_mem_region OK!
[ 21.393661] AXI fpga dev virtual address is 0xdf9fc000
[ 21.398765] *base_vir_addr = 0x8c510
[ 21.413789] In fpga mem driver!
[ 21.417041] request_mem_region OK!
[ 21.420628] fpga mem virtual address is 0xe2000000
[ 22.189178]
[ 22.189178] bcm54xx_config_init
[ 22.889162]
[ 22.889162] bcm54xx_config_init
[ 25.890027] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 25.896050] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 145.081139] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=108 value=880
Fix freq=650 Chain[6] voltage_pic=108 value=880
Fix freq=650 Chain[7] voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=650M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=650M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=650M
Chain[J8] has no core num in PIC
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:5 max freq=650
Chain:5 min freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650
max freq = 650
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:29 remote:32 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:29 remote:32 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:29 remote:32 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J7] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:29 remote:32 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:30 remote:33 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:30 remote:33 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=880 [108]
Chain[J8] set working voltage=880 [108]
setStartTimePoint total_tv_start_sys=71 total_tv_end_sys=72
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
get RT hashrate from Chain[6]: (asic index start from 1-63)
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=60
read failed on Chain[5] Chip[62] middle Temp old value:74
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=59
read failed on Chain[6] Chip[62] middle Temp old value:72
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[7] Chip[62] local Temp=62
read failed on Chain[7] Chip[62] middle Temp old value:75
Done read temp on Chain[7]
set FAN speed according to: temp_highest=75 temp_top1[PWM_T]=75 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=-35
FAN PWM: 0
read_temp_func Done!
CRC error counter=0
Both have static IP which are different of course. So that can't happen that they are trying to connect to the same.
Jump to: