Topic: 2 PSU Miner Setup (Read 599 times)
Basically that will allow the 2nd PSU to receive the on and off signal that the motherboard sends when the power button is pressed.
Connect the green wires and any 2 black wires from the 24 pin ATX connectors together. Risers to first PSU. Figure 35w per riser.
That is to trick the PSU thinking it is connected to a MB right?
Like
http://www.overclock.net/t/14455/multiple-power-supply-guide
Connect the green wires and any 2 black wires from the 24 pin ATX connectors together. Risers to first PSU. Figure 35w per riser.
Hi Guys,
Do you have a guide that you can point me 2?
I will be setting up a 6 card Rig but i dont know how to connect up the second PSU to the 3 cards.
I currently will have the following:
PSU 1 : Mobo/HD/3 GPUs + Risers
PSU 2 : 3 GPUs (i dont know if i connect the risers to the 1st or second GPU)
Any help would be appreciated.
Do you have a guide that you can point me 2?
I will be setting up a 6 card Rig but i dont know how to connect up the second PSU to the 3 cards.
I currently will have the following:
PSU 1 : Mobo/HD/3 GPUs + Risers
PSU 2 : 3 GPUs (i dont know if i connect the risers to the 1st or second GPU)
Any help would be appreciated.
Jump to: