Running ATX psu on 250v ends up being about 240v at the wall?
With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v?
I ran this psu
https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384&cm_re=rosewill_tokamak-_-17-182-384-_-Product
at 241 volts.
a word of advice do not use the pandaminer psu it is unsafe for the pandaminer in my opinion
I would use a finksy 2000 watt server or an optimizer 2000 watt server for a pandaminer
optimizer
https://bitcointalksearch.org/user/optimizer-779364
finksy
https://bitcointalksearch.org/user/finksy-347946
I have a pdu putting out 238 to 241 volts
it has c14 to c19 cable
https://www.amazon.com/Cablelera-Power-Extension-IEC320-ZWACDFAN-03/dp/B00I4AI596/ref=sr_1_3?s=electronics&ie=UTF8&qid=1497313424&sr=1-3&keywords=c14+to+c19+power+cord
vs
(NEMA 5-15P to IEC320 C19)----- stock for the tokamak
https://www.amazon.com/Cables-Go-10352-14AWG-IEC320/dp/B00LNDHCN6/ref=sr_1_1?s=electronics&ie=UTF8&qid=1497313339&sr=1-1-spons&keywords=nema+15p+to+c19+power+cord&psc=1
get a 30 amp circuit breaker with 240 volts put in correctly from an electrician
make sure it has a l 30 r wall outlet
http://www.ebay.com/itm/NEMA-L6-30R-Turn-Twist-Lock-Locking-Receptacle-Outlet-30A-250V-2P-3W-L6-30-/162134424426?
make sure you have him use 10 gauge wires
here is a good deal on a pdu
http://www.ebay.com/itm/Dell-AP6031-Rackmount-Power-Distribution-Unit-PDU-200-240V-24-Amp-5T439-/282498334449?
it need the outlet above
but the power cords would be
http://www.ebay.com/itm/6ft-C13-to-C20-14-3-Gauge-3-Prong-Power-Adapter-Cable-Cord-10Amp-125V-SJT-Black-/122267666365?
or http://www.ebay.com/itm/6-foot-Power-Cord-Black-NEMA-C19-to-C20-14AWG-/391469503510?
the pdu listed using a 30 amp circuit breaker is derated to 24amp
you can do 4 pandaminers or 4x
7 card diy rigs and be safe.
the pdu listed is a good price.