Author

Topic: 2nd Antminer S3 not mining on pool? (Read 2053 times)

hero member
Activity: 616
Merit: 500
July 29, 2014, 08:26:47 AM
#4
Use the antminer s3 guide and while one of your antminer s3 is disconnected change it's IP in the configuration.
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653

Changing to DHCP worked. Thanks. Both are mining now =)
The intent was to change to another fixed IP rather than DHCP.  DHCP 'works' but you may need to 'hunt' for that Antminer S3 if your IP assignment changes, and DHCP has a finite lease time that will expire.

Cheers
newbie
Activity: 3
Merit: 0
July 29, 2014, 04:11:21 AM
#3
Use the antminer s3 guide and while one of your antminer s3 is disconnected change it's IP in the configuration.
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653

Changing to DHCP worked. Thanks. Both are mining now =)
full member
Activity: 210
Merit: 100
July 29, 2014, 02:12:47 AM
#2
Use the antminer s3 guide and while one of your antminer s3 is disconnected change it's IP in the configuration.
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-bitmain-antminer-s3-setup-hd-702653
newbie
Activity: 3
Merit: 0
July 29, 2014, 01:56:49 AM
#1
Hey! 

You all helped me get my power supplies to work with a paper clip trick and I have my first Antminer S3 mining on ghash.io at full speed... Yay me. I have a problem tho. My 2nd BItmain antminer S3 gets assigned to the same IP (192.168.1.99) as my 1st one... and on my router network, they BOTH have the same IP but the problem is: antminer website interface only recognizes 1 miner! Any help available would be appreciated so I can start using my 2nd miner! What do I need to do?
Jump to: