Offering 40% discount for Black Friday on www.tristars.ca until December 1st.
Please note Bubblemail is only for Canada and United States shipments.
CODE: BLACKFRIDAY
Topic: 3D Printed PSA, MNT, BGS and CGC Graded Card and Slab Holders (Read 719 times)
I have variations to fit pretty much any sized collectible. I will note this also made a lot more room on my shelves
also - to share pics of the ones used for ballet wallets - these also work for any other credit card sized collectible that also fit in the acrylic ballet cases.
I can do any other color you can imagine as well
for these 2 versions - send me a DM directly.
I can do any other color you can imagine as well
for these 2 versions - send me a DM directly.
Nice Work! Will definitely buy once I get some rare cards to showcase, wish you had more digimon stuff on your website.
Hope to have more soon. Just have the 20 year old Sticker Boxes!
--------
Offering up custom stand orders for those interested!
I think it would be pretty cool to be able to make the stand a little more thicker at the bottom and then include the Pokemon's name etched right into it.
Yea - I am not sure on the legality of putting their copywritten information directly on the stands - I will try and find some possibilities around that. Doing for personal is no issue but to sell it with the names could be a sticky situation.
Nice Work! Will definitely buy once I get some rare cards to showcase, wish you had more digimon stuff on your website.
Hope to have more soon. Just have the 20 year old Sticker Boxes!
--------
Offering up custom stand orders for those interested!
I think it would be pretty cool to be able to make the stand a little more thicker at the bottom and then include the Pokemon's name etched right into it.
I would suggest you can contact MoparMiningLLC directly for custom order/request. This is something he can probably do for you!
I don't offer any sort of copy right material into the stands, but also because they are used by a wide variety of collectors not just Pokemon.
Nice Work! Will definitely buy once I get some rare cards to showcase, wish you had more digimon stuff on your website.
Hope to have more soon. Just have the 20 year old Sticker Boxes!
--------
Offering up custom stand orders for those interested!
I think it would be pretty cool to be able to make the stand a little more thicker at the bottom and then include the Pokemon's name etched right into it.
Nice Work! Will definitely buy once I get some rare cards to showcase, wish you had more digimon stuff on your website.
Hope to have more soon. Just have the 20 year old Sticker Boxes!
--------
Offering up custom stand orders for those interested!
Got mine in the mail yesterday. Highly recommend.
Nice Work! Will definitely buy once I get some rare cards to showcase, wish you had more digimon stuff on your website.
Lots of stands available! Also have new release of Pokemon Chilling Reign!
thank you! This has definitely evolved - I started with just one printer and now have 7 running 24/7 with more printers being ordered soon
Funny enough, I was just looking for something to hold my PSA graded cards and was actually looking into buying a 3D printer and making some myself, but then this thread happened to get bumped. I'm kinda of confused by the post though, is MM printing these or is Spazzer?
I print them for Spazzer's business, Tristars
thank you! This has definitely evolved - I started with just one printer and now have 7 running 24/7 with more printers being ordered soon
Funny enough, I was just looking for something to hold my PSA graded cards and was actually looking into buying a 3D printer and making some myself, but then this thread happened to get bumped. I'm kinda of confused by the post though, is MM printing these or is Spazzer?
Really great quality stuff by Mopar. i have couple of those and they fit nicely for my Ballet Cards.
Glad to hear the ballet ones fit well!
Really great quality stuff by Mopar. i have couple of those and they fit nicely for my Ballet Cards.
For those interested bulk discounts are available for those thinking about wholesale options.
I've added some supplies and really nice Ultra Pro Acrylic Cases for Booster Boxes and Wizard of the Coast Pokemon / Harry Potter.
Crypto payments are enabled! Contact me directly for best shipping options. Happy to ship to minerjones for Mantis Prime storage.
Crypto payments are enabled! Contact me directly for best shipping options. Happy to ship to minerjones for Mantis Prime storage.
I can work with you to make ones to fit anything you might have. I would simply need at least one of each various style/size you want to use as at template.
For the moment, that might have to be on the "to do" list. I'll have to work out getting a couple of capsules to you that are sent from overseas (and then sent back again) - I'll PM you about it at a later date.
sounds good.
I can work with you to make ones to fit anything you might have. I would simply need at least one of each various style/size you want to use as at template.
For the moment, that might have to be on the "to do" list. I'll have to work out getting a couple of capsules to you that are sent from overseas (and then sent back again) - I'll PM you about it at a later date.
Hi and thanks to @MoparMiningLLC for letting me know about this thread & service.
I'm looking to get some cards graded and was wondering if they fit PCGS "slabbed" coins - coins that have been graded and encapsulated.
I have two different sizes, one a shall we say "ordinary" size coin holder and a second for oversized coins that are the same width but are slightly fatter holders. Not sure how many I'd like to get, but thought I'd ask about them first.
Regards,
I'm looking to get some cards graded and was wondering if they fit PCGS "slabbed" coins - coins that have been graded and encapsulated.
I have two different sizes, one a shall we say "ordinary" size coin holder and a second for oversized coins that are the same width but are slightly fatter holders. Not sure how many I'd like to get, but thought I'd ask about them first.
Regards,
I can work with you to make ones to fit anything you might have. I would simply need at least one of each various style/size you want to use as at template.
Hi and thanks to @MoparMiningLLC for letting me know about this thread & service.
I'm looking to get some cards graded and was wondering if they fit PCGS "slabbed" coins - coins that have been graded and encapsulated.
I have two different sizes, one a shall we say "ordinary" size coin holder and a second for oversized coins that are the same width but are slightly fatter holders. Not sure how many I'd like to get, but thought I'd ask about them first.
Regards,
I'm looking to get some cards graded and was wondering if they fit PCGS "slabbed" coins - coins that have been graded and encapsulated.
I have two different sizes, one a shall we say "ordinary" size coin holder and a second for oversized coins that are the same width but are slightly fatter holders. Not sure how many I'd like to get, but thought I'd ask about them first.
Regards,
Hey Timelord2067,
Sorry I don't have an answer if PCGS slabbed coins fit. They are not designed for those slabs so I would not recommend them.
If you are looking for custom stands speak with Mopar again.
Spazzer
Hi and thanks to @MoparMiningLLC for letting me know about this thread & service.
I'm looking to get some cards graded and was wondering if they fit PCGS "slabbed" coins - coins that have been graded and encapsulated.
I have two different sizes, one a shall we say "ordinary" size coin holder and a second for oversized coins that are the same width but are slightly fatter holders. Not sure how many I'd like to get, but thought I'd ask about them first.
Regards,
I'm looking to get some cards graded and was wondering if they fit PCGS "slabbed" coins - coins that have been graded and encapsulated.
I have two different sizes, one a shall we say "ordinary" size coin holder and a second for oversized coins that are the same width but are slightly fatter holders. Not sure how many I'd like to get, but thought I'd ask about them first.
Regards,
Turned on real-time rates for international. Your best bet is to still contact me directly.
Have you thought of having a company make them for you via injection molding?
yes the set up cost is astounding. but if it grew to be a lot more than what it is now, that might be the way to go. The thing is here there is not one stand that fits all - there are the 4 for spazzer and then at least 4-5 more that I can make - so take that huge set up fee that comes with injection molding and multiply it by 8 to 9 times. Maybe they would give a discount but would still be a huge fee.
Right on. Thanks for sharing and good luck, they look great!
Have you thought of having a company make them for you via injection molding?
yes the set up cost is astounding. but if it grew to be a lot more than what it is now, that might be the way to go. The thing is here there is not one stand that fits all - there are the 4 for spazzer and then at least 4-5 more that I can make - so take that huge set up fee that comes with injection molding and multiply it by 8 to 9 times. Maybe they would give a discount but would still be a huge fee.
Have you thought of having a company make them for you via injection molding?
Haha, nice job Mopar. Maybe a holder for ICG/ANACS graded coins next? 😛
I have a few others in the works:
Two different BalletCrypto - one landscape for card in the plastic case and one portrait for the card in the plastic case and sleeve (these should also work for other credit card sized collectible items that are in the ballet sleeves).
ANACS - I have 2 ANACS slabbed coins to use for template
ICG - I need to talk to Anonymousminer about getting one of my coins graded or getting an empty slab
BCW ungraded card slabs - like what holds the A&G crypto cards.
I can also do any others - I just need an empty slab as a template - or at least very accurate dimensions/specs for the slab.
My priority is getting/keeping Spazzer stocked up. And that is why I will be ordering more printers soon
Haha, nice job Mopar. Maybe a holder for ICG/ANACS graded coins next? 😛
thank you! This has definitely evolved - I started with just one printer and now have 7 running 24/7 with more printers being ordered soon
Reserved
Here are some photos from customers:
Big shoutout to MoparMiningLLC without whom this would not have been possible.
He's been 3D Printing the stands and I would highly recommend reaching out to him if you are ever looking to 3D print 'things'.
Now with that said I am proud to share with you a project I've been working on for the last 6 months.
These 3D printed stands fit perfectly for your graded cards for display purposes with or without sleeves.
Tristars - 3D Printed Graded Card Stands
Available for PSA, MNT, BGS and CGC.
10 Colours Available: Dark Red, Red, Yellow, Green, Blue, Pink, Purple, White, Grey and Black.
Limited Lifetime Warranty
Cost: $2.99
I launched a website that accepts cryptocurrency payments via coinpayments: https://tristars.ca/collections/stands
Shipping from Canada to North America.
International: Contact Me
Global shipping has not been enabled on the website until I figure out cost efficient process for doing so.
He's been 3D Printing the stands and I would highly recommend reaching out to him if you are ever looking to 3D print 'things'.
Now with that said I am proud to share with you a project I've been working on for the last 6 months.
These 3D printed stands fit perfectly for your graded cards for display purposes with or without sleeves.
Tristars - 3D Printed Graded Card Stands
Available for PSA, MNT, BGS and CGC.
10 Colours Available: Dark Red, Red, Yellow, Green, Blue, Pink, Purple, White, Grey and Black.
Limited Lifetime Warranty
Cost: $2.99
I launched a website that accepts cryptocurrency payments via coinpayments: https://tristars.ca/collections/stands
Shipping from Canada to North America.
International: Contact Me
Global shipping has not been enabled on the website until I figure out cost efficient process for doing so.
Jump to: