Topic: 3x 6990 Rigs (Read 1395 times)
i water cool my 5970 and 5870 they stay nice and cool but let me tell you it dumps a ton of heat into my room.
Yeah, I'm finding it tough to keep 2x6950 cool even with a ton of case fans; I have no idea how 2 or 3x6990 would work without water cooling.
plus a way to keep them cool...
3 x 6990 overlocked will be belting out a lof of heat.
3 x 6990 overlocked will be belting out a lof of heat.
for 3 6990 you need at least 1200W thats true!
Note that the 6990 consume about from 375W stock to 415W overclocked.So You'll need a Power supply unit of at least 1200W(if not more!!)to power 3 cards...
You can also buy PCIe 16x and/or 1x extenders.
I was able to pick up a few here: http://www.cablesaurus.com/
I'm able to run my cards on a board with 2 PCIe x16 v1.0 slots and
1 PCIe 1x slot.
If you use the extenders you'll have to find an alternative way to
mount/support the cards since they won't be slotted directly into your
motherboard. I built a frame using PVC pipe and hang the cards
from it using zip ties.
Good luck,
Matt
I was able to pick up a few here: http://www.cablesaurus.com/
I'm able to run my cards on a board with 2 PCIe x16 v1.0 slots and
1 PCIe 1x slot.
If you use the extenders you'll have to find an alternative way to
mount/support the cards since they won't be slotted directly into your
motherboard. I built a frame using PVC pipe and hang the cards
from it using zip ties.
Good luck,
Matt
Hi Arashd,
hey, same here. I just ordered my list of goodies. I went for 2x6950s (and still reserve the option to buy more later) instead of 6990s because the cost-reward factor was still to high. You can get 6950s in my area for 250$, but the 6990s are way up in the 700$-range.
What you need is a board that can host those graphics cards side-by-side. They usually take two slots, so the PCIe slots should be spaced further apart.
This board did it for me: http://www.gigabyte.com/products/product-page.aspx?pid=3880#ov
You can stick in 4 PCIe x16 graphics cards side-by-side. See the nice little picture in the promo.
Since most of the Bitcoin operations do use the GPU, I bought an AMD Phenom II x2 250, which was on sale. I also stuck in a 4GB DDR3 module.
What you need next is at least a 750W power supply that can power your 3 cards (or in my case later on 4). This one can do and was on sale at my retailer: http://www.ocztechnology.com/ocz-750w-fatal1ty-series-power-supply.html
For the case I recycled an old server case that formerly hosted an old Dual-Xeon server.
I hope it helps. If I were you I wouldn't throw my life savings into the 6690s, at the current bitcoin mining difficulty it'll take quite some time until you get your return on it, even with 2Ghash/sec.
Here are some numbers with $/Mhash figures and more ideas about rigs: https://en.bitcoin.it/wiki/Mining_rig
hey, same here. I just ordered my list of goodies. I went for 2x6950s (and still reserve the option to buy more later) instead of 6990s because the cost-reward factor was still to high. You can get 6950s in my area for 250$, but the 6990s are way up in the 700$-range.
What you need is a board that can host those graphics cards side-by-side. They usually take two slots, so the PCIe slots should be spaced further apart.
This board did it for me: http://www.gigabyte.com/products/product-page.aspx?pid=3880#ov
You can stick in 4 PCIe x16 graphics cards side-by-side. See the nice little picture in the promo.
Since most of the Bitcoin operations do use the GPU, I bought an AMD Phenom II x2 250, which was on sale. I also stuck in a 4GB DDR3 module.
What you need next is at least a 750W power supply that can power your 3 cards (or in my case later on 4). This one can do and was on sale at my retailer: http://www.ocztechnology.com/ocz-750w-fatal1ty-series-power-supply.html
For the case I recycled an old server case that formerly hosted an old Dual-Xeon server.
I hope it helps. If I were you I wouldn't throw my life savings into the 6690s, at the current bitcoin mining difficulty it'll take quite some time until you get your return on it, even with 2Ghash/sec.
Here are some numbers with $/Mhash figures and more ideas about rigs: https://en.bitcoin.it/wiki/Mining_rig
Hello all , I am certainly a noob. I have been reading a lot of this forum for the past several weeks so I think I have learned a thing or two. I currently just am mining with a few simple computers churning out a whopping 100 Mhash/sec. I have no confusion about hitting a jackpot here and building a mining rig to retire on, but I do appreciate the entire concept of bitcoin and I want to participate while at the same time find an excuse to buy a bunch of video cards and build computers and participate in this community - we all need hobbies!
I figure if I am going to get in, get in right! I intend to get 3 6990 when they come in stock (i know, super hard to find) and build a decent rig out of those hoping to get to 2 Ghash as an output. I do not pay electric costs. Anyone recommend a good motherboard/PSU/case for this purpose?
Thanks!
I figure if I am going to get in, get in right! I intend to get 3 6990 when they come in stock (i know, super hard to find) and build a decent rig out of those hoping to get to 2 Ghash as an output. I do not pay electric costs. Anyone recommend a good motherboard/PSU/case for this purpose?
Thanks!
Jump to: