no, I only restarted cgminer. I think a hard switch generates some overload on your p2pool process or on the network connection/latency, but I don't know really.
I have only 0.8 - 1.2 % DOA on my local p2pool node. I'm useing cgminer 2.7.5 and CM1 FPGA boards.
eb
Topic: [45GH/s] Growing up [P2Pool Subpool] in Germany 0% Fee (Read 2973 times)
Subo1977,
it's me testung your node as a backup, but I see a huge amount of DOA which is very bad. I will let your node in my config as priority 3.
Sry to bother your connection and node.
eb
it's me testung your node as a backup, but I see a huge amount of DOA which is very bad. I will let your node in my config as priority 3.
Sry to bother your connection and node.
eb
no problem..
there was a Phase of our testing with low ( ~ 8 - 10%) DOA and a phase with high ( ~50 % ) DOA. did you change somthing when you make our test?
Have a look on the statspage.
You can go on with testing on my node
Subo
Subo1977,
it's me testung your node as a backup, but I see a huge amount of DOA which is very bad. I will let your node in my config as priority 3.
Sry to bother your connection and node.
eb
it's me testung your node as a backup, but I see a huge amount of DOA which is very bad. I will let your node in my config as priority 3.
Sry to bother your connection and node.
eb
WE reached the 45 GH mark 
There was an Problem with an Router.
at this time we go with ~ 40 GH from extrernal with ~ 8 % DOA.
try it again....
at this time we go with ~ 40 GH from extrernal with ~ 8 % DOA.
try it again....
Hi Subo1977,
on your pool I have 19% rejected while other p2pool nodes gives only 7%...
Whats the problem? I'm from germany, that's why I would like to use your pool. I'm the "big" address on your pool ;-)
eb
on your pool I have 19% rejected while other p2pool nodes gives only 7%...
Whats the problem? I'm from germany, that's why I would like to use your pool. I'm the "big" address on your pool ;-)
eb
Who own's the BTC Adress
1FZ75WMKHmbTQiDyxMcu6XiDL2Yx7ScU1o
This adress Produce 100% Reject's on my node http://p2pool-cologne.dyndns.org:9332 !!!!!!
1FZ75WMKHmbTQiDyxMcu6XiDL2Yx7ScU1o
This adress Produce 100% Reject's on my node http://p2pool-cologne.dyndns.org:9332 !!!!!!
come on People.
Please mine on my node.
Its runs only the actual P2Pool Version with autoupdate.
Lets Rock my Node
Please mine on my node.
Its runs only the actual P2Pool Version with autoupdate.
Lets Rock my Node
Come on People,
lets try to hit the 20 GH Border....
I will spend a few Bitcoin's if we hit it.
Throw Your miner to my Pool
lets try to hit the 20 GH Border....
I will spend a few Bitcoin's if we hit it.
Throw Your miner to my Pool
Actual we run at
Local rate: 12.9GH/s
lets going on
Local rate: 12.9GH/s
lets going on
now we run the aktual release
and we reached the 4GH rate
and we reached the 4GH rate
Server ist Upgraded to the actual Version:
P2Pool 3.1-15-gc8ee3e0
P2Pool 3.1-15-gc8ee3e0
I Hope so
Grow baby grow! Hope it does, good luck.
Now i set to 0% Fee,
Miners try it out........
Miners try it out........
Hey Peoples,
have a look on this pool and try it.
have a look on this pool and try it.
Hello,
I set up an P2Pool Subpool for Public Access, because I want to Support the P2POOL Project.
Anybody can use it:
-Be Part of the Big P2Pool and Profit from small Connectionlatency when you connect from Europe.
-The Benefit from the P2Pool Pool without installation of the P2Pool Client
-No Registration Username = YOUR Bitcoinaddress
-Payout: PPLNS
-At Moment 0.01 % Fee ( the aktual fee can be seen on http://p2pool-cologne.dyndns.org:9332/fee
- The Stats can be seen on http://p2pool-cologne.dyndns.org:9332/static
It's an VM running on an VMware Cluster for HA at a location near Cologne / Germany.
The Server is also listed at http://nodes.p2pmine.com/
Just set your miner to : http://p2pool-cologne.dyndns.org:9332 and use your Bitcoin address as your username and use anything for your password.
Have fun
Stefan
I set up an P2Pool Subpool for Public Access, because I want to Support the P2POOL Project.
Anybody can use it:
-Be Part of the Big P2Pool and Profit from small Connectionlatency when you connect from Europe.
-The Benefit from the P2Pool Pool without installation of the P2Pool Client
-No Registration Username = YOUR Bitcoinaddress
-Payout: PPLNS
-At Moment 0.01 % Fee ( the aktual fee can be seen on http://p2pool-cologne.dyndns.org:9332/fee
- The Stats can be seen on http://p2pool-cologne.dyndns.org:9332/static
It's an VM running on an VMware Cluster for HA at a location near Cologne / Germany.
The Server is also listed at http://nodes.p2pmine.com/
Just set your miner to : http://p2pool-cologne.dyndns.org:9332 and use your Bitcoin address as your username and use anything for your password.
Have fun
Stefan
Jump to: