5,7MH/s with 6GPU, is that ok ? | Bitcointalksearch.org

walkeraki

newbie

Activity: 9

Merit: 1

Quote from: CryptoWatcher420 on October 30, 2017, 02:28:10 PM

Quote from: freebutcaged on October 30, 2017, 07:46:43 AM

Quote from: walkeraki on October 30, 2017, 07:11:40 AM

Hey, few days ago I bought a mining rig, put everything together and started to mine. Now i am trying to increase my efficiency and by checking forums and whatnot I see my rig might be mining a bit slower then it should?

Anyways, as I am new maybe i am wrong but would love to hear someone comment on my current situation. From tweaking i have only used afterburner and set my graphics card like this:
https://image.ibb.co/hjK6fm/Screenshot_2.png
https://image.ibb.co/kUrK0m/Screenshot_3.png

And i am getting https://image.ibb.co/dYycmR/Screenshot_4.png

So basicly i would just love to hear what you guys think and if that is not the place to ask this I would appreciate if someone would appoint me to one or move this topic.
Thanks!

NeoScrypt algorithm will give you 1.01 MH/s mate for each Gpu. with Lyra2rev algorithm you could get 40 MH/s for each Gpu. the most profitable

Algorithm for GTX1070 is NeoScrypt. may be a little slower but it's not that slow. you could use Nicehash profitability calculator.

https://www.nicehash.com/profitability-calculator/nvidia-gtx-1070

except nicehash is a crap service, you are better off mining the actual coin

Why would u say nicehash is crap service? On their website i calculated that with my current set up I should be getting around 9€/day and instead I am making 10 sometimes even 12 while using their program.
Haven't tryied dedicated mining programs yet, but I think to get best of all the cyprtocurencies rising and falling all the time is to use program like this.
Maybe I am wrong tho.

CryptoWatcher420

sr. member

Activity: 462

Merit: 258

Small Time Miner, Rig Builder, Crypto Trader

Quote from: freebutcaged on October 30, 2017, 07:46:43 AM

Quote from: walkeraki on October 30, 2017, 07:11:40 AM

Hey, few days ago I bought a mining rig, put everything together and started to mine. Now i am trying to increase my efficiency and by checking forums and whatnot I see my rig might be mining a bit slower then it should?

Anyways, as I am new maybe i am wrong but would love to hear someone comment on my current situation. From tweaking i have only used afterburner and set my graphics card like this:

And i am getting

So basicly i would just love to hear what you guys think and if that is not the place to ask this I would appreciate if someone would appoint me to one or move this topic.
Thanks!

NeoScrypt algorithm will give you 1.01 MH/s mate for each Gpu. with Lyra2rev algorithm you could get 40 MH/s for each Gpu. the most profitable

Algorithm for GTX1070 is NeoScrypt. may be a little slower but it's not that slow. you could use Nicehash profitability calculator.

https://www.nicehash.com/profitability-calculator/nvidia-gtx-1070

except nicehash is a crap service, you are better off mining the actual coin

vinodelsol

member

Activity: 73

Merit: 10

neoscrypt is not profibility algo, use ethihash(daggerhashimoto) or equihash

freebutcaged

hero member

Activity: 588

Merit: 541

I wasn't advertising for Nicehash here mate, I never said OP should mine on their pool or use their miner, at least their calculator gave a better result

Than the results achieved by OP himself. if you want to use a miner just make sure to check their forum thread, if there is no thread for a miner in here

Then don't ever install them. Ccminer and Claymore are Ok but there are many copies with the same name.

walkeraki

newbie

Activity: 9

Merit: 1

Ty a lot. Got exactly what i wanted to hear.

Sev18

full member

Activity: 154

Merit: 100

It seems quite appropriate hashrate for 1070. You can trust nicehash profitability.

oddity2505

member

Activity: 120

Merit: 10

For the miner that included in Nicehash the performance on Neoscrypt is ok. However you can get more speed if you use ccminer Alexis for Neoscrypt and mine directly on the pool and not on nicehash, about 10-15% extra performance is possible.

freebutcaged

hero member

Activity: 588

Merit: 541

Quote from: walkeraki on October 30, 2017, 07:11:40 AM

Hey, few days ago I bought a mining rig, put everything together and started to mine. Now i am trying to increase my efficiency and by checking forums and whatnot I see my rig might be mining a bit slower then it should?

Anyways, as I am new maybe i am wrong but would love to hear someone comment on my current situation. From tweaking i have only used afterburner and set my graphics card like this:

And i am getting

So basicly i would just love to hear what you guys think and if that is not the place to ask this I would appreciate if someone would appoint me to one or move this topic.
Thanks!

NeoScrypt algorithm will give you 1.01 MH/s mate for each Gpu. with Lyra2rev algorithm you could get 40 MH/s for each Gpu. the most profitable

Algorithm for GTX1070 is NeoScrypt. may be a little slower but it's not that slow. you could use Nicehash profitability calculator.

https://www.nicehash.com/profitability-calculator/nvidia-gtx-1070

walkeraki

newbie

Activity: 9

Merit: 1

Hey, few days ago I bought a mining rig, put everything together and started to mine. Now i am trying to increase my efficiency and by checking forums and whatnot I see my rig might be mining a bit slower then it should?

Anyways, as I am new maybe i am wrong but would love to hear someone comment on my current situation. From tweaking i have only used afterburner and set my graphics card like this:
https://image.ibb.co/hjK6fm/Screenshot_2.png
https://image.ibb.co/kUrK0m/Screenshot_3.png

And i am getting https://image.ibb.co/dYycmR/Screenshot_4.png

So basicly i would just love to hear what you guys think and if that is not the place to ask this I would appreciate if someone would appoint me to one or move this topic.
Thanks!

Topic: 5,7MH/s with 6GPU, is that ok ? (Read 447 times)