Topic: 5830 Cards OC'd, GUI and Display Errors (Read 996 times)
I thought I had Catalyst 11.6B but it shows up as 11.7. SDK 2.4
What catalyst and app sdk versions are you using?
And here's what it looks like for the record:
Very fun to read off of.
Very fun to read off of.
Just got the display driver error again so I don't believe that was it.
Trying it out thanks. The mhash looks the same but we'll see about the errors.
Try taking out AGGRESSION = 0 and put in -f30, I think you may have the flag for the wrong type of miner in there.
GUIMiner, OpenCL, flags: -v -w256 AGGRESSION = 0
Whenever I try Phoenix with phatk I can barely navigate my OS.
Whenever I try Phoenix with phatk I can barely navigate my OS.
What miner are you using, and what flags with it? My guess is it's the -f, aggression, or similar flag.
I currently have two 5830s blazing at 980Mhz each and their heat has peaked at 76C on the hottest day of the summer thus far. Despite the relatively low heat, I am getting a number of GUI and Display errors while mining. The GUI errors involve skewed text/pics and random "bits" appearing on the screen while the display error tends to freeze my cursor and cause the screen to go black until I am informed that a driver error was resolved.
I'm wondering if I am pushing these cards too hard despite the low temps or whether this is simply the result of a faulty card or software error. I am in Win7 and this is not a dedicated rig, for the record.
Thanks in advance.
I'm wondering if I am pushing these cards too hard despite the low temps or whether this is simply the result of a faulty card or software error. I am in Win7 and this is not a dedicated rig, for the record.
Thanks in advance.
Jump to: