back to square one, 12.1 ccc drivers, 3 gpu detected in system, 3 gpu detected in gpu-z, but crossfire dissabled, and 3 gpu detected in caps viewer, says "no multi gpu support 3 gpu's" opencl box ticked in all cards, but here is something new.
when i mine on eather gpu selected 0-1 or 0-2 it only puts under load the first gpu according to caps viewer!
i cant use cgminer as i dont understand what to do, yes i'm very new, unless its point and click i cant do it (yet)
this came from a gaming system and ran lovely, so i'm going to sell it, its obviously something silly i'm doing wrong, but i have been on this card for two weeks, thanks for all your reply's, i'm going to lock this now as i cant see anything more i can do. feel free to msg me though.
Topic: 5970 guiminer help needed please, if anyone still intrested (Read 1844 times)
just put on 11.11 CCC and 640x480 4bit res, nothing else done, stumpped!
I have found that windows (especially that ancient bug prone POS you call XP) doesn't like swapping cards around especially multiple GPUs. You may need to do a clean install of Windows.
I would recommend using a real miner like cgminer. GUIMiner should just die IMHO. It is a crutch not supported by many experienced miners hence hard to help new users when they run into problems. Starting cgminer with the "-n" option will show how many cores are seen by the SDK at the driver level.
If everything else fails try a clean install of Windows, install critical updates, w/ Catalyst 11.11 (IIRC that is a no CPU bug but doesn't have the POS SDK 2.6). Alternatively you can simply install whatever driver and SDK you can separately (although that tends to confuse people).
I would recommend using a real miner like cgminer. GUIMiner should just die IMHO. It is a crutch not supported by many experienced miners hence hard to help new users when they run into problems. Starting cgminer with the "-n" option will show how many cores are seen by the SDK at the driver level.
If everything else fails try a clean install of Windows, install critical updates, w/ Catalyst 11.11 (IIRC that is a no CPU bug but doesn't have the POS SDK 2.6). Alternatively you can simply install whatever driver and SDK you can separately (although that tends to confuse people).
so i pulled the 58xx and put the 59xx in the first pci-e slot and sterting again
i'm getting F&^%ing nowhere fast, now i got 640x480 4 bit res on main mon and it wont go higher, i cant do anything as its all 800x600 and i cant see F' all, having to re-stream now as i hit this keyboard. bar soaking the card in warm soapy water i dont know what to do.
before it went, i loaded on full CCC and seen that the second gpu was Dissabled, with crossfire off (i usually load the drivers and packs but not CCC itself) If its dissabled, the card is naff i think??? anyone still here lol??
before it went, i loaded on full CCC and seen that the second gpu was Dissabled, with crossfire off (i usually load the drivers and packs but not CCC itself) If its dissabled, the card is naff i think??? anyone still here lol??
i think its ok, i have a thread going in newbe section, going through this question
https://bitcointalksearch.org/topic/5970-power-related-questions-turns-into-mining-question-76978
i have different cores selected for each task.
https://bitcointalksearch.org/topic/5970-power-related-questions-turns-into-mining-question-76978
i have different cores selected for each task.
are you sure you're selecting the other core in GUIminer ? sounds like you've create 2 tabs but they're both using the same core. You should see 2 devices under the device list, make sure each tab is using the different device from the other tab,
just gone back to 11.6 again, made sure it was ocl version and enabled all monitors, checked for open cl tick in gpu-z, all ok, until i mine again, though i have noticed when i start the second gpu mining, (whichever i choose to start second, not gpu2) it goes around 10-17mhs but the first one drops about that amount??? am i really the only person to have this happen to? lol well no change there then
EDIT:- is it worth going latest 12.3 and load an sdk app on?
EDIT:- is it worth going latest 12.3 and load an sdk app on?
might be worth trying to uninstall the drivers and using drivercleaner then re-installing a different version.
I've BSOD under load on a few of my rigs and it always turned out to be driver/software related not hardware.
I'm sure your 5970 is fine
I've BSOD under load on a few of my rigs and it always turned out to be driver/software related not hardware.
I'm sure your 5970 is fine
ok, well BSOD!! tried 11.6 to no avail, decided to try last post and remove 58xx, as soon as i started to mine on 1 gpu bsod, saying the graphics card got stuck in an infinite loop
stop: 0x000000ea (0x89987da8, 0x89a59430, 0xba4e3cbc, 0x00000001)
ati2dvag
i'm getting worried now, my card might be defective, as a 5970 is alot for me to loose.
edit, i have been reading that i need to dissable corssfire to use each core independently, this true? if so how can you dissable a hardware crossfire LOL!
stop: 0x000000ea (0x89987da8, 0x89a59430, 0xba4e3cbc, 0x00000001)
ati2dvag
i'm getting worried now, my card might be defective, as a 5970 is alot for me to loose.
edit, i have been reading that i need to dissable corssfire to use each core independently, this true? if so how can you dissable a hardware crossfire LOL!
I thought XP 32-bit can only handle 2 graphics cards ?
pull the 5870 and see if both cores on the 5970 go full speed ?
pull the 5870 and see if both cores on the 5970 go full speed ?
different drivers? 11.6?
both on the same drivers 12.1, i use 12.1 as i have had better luck on other systems, but i shall driver sweep them off and try 11.6
different drivers? 11.6?
hi all, had loads of problems as i am still learning, i need help with the final stage, i have win xp 32bit, guiminer-20120219, open cl loaded and checked with gpu-z, it has 5870 and 5970 in one system, as far as i can tell, all is installed, 58xx mining no problems, when i start one core of the 59xx thats fine but when i start the other, i get 17mhs, and this works the other way around too, so just to recap, whatever core i start first runs ok, its the second started core that goes slow.
also fyi i have tried same worker/different worker, same pool/different pool combo's with no effect.
also fyi i have tried same worker/different worker, same pool/different pool combo's with no effect.
Jump to: