5970 problems - seeking suggestions | Bitcointalksearch.org

sadpandatech

hero member

Activity: 504

Merit: 500

Quote from: DeathAndTaxes on January 02, 2012, 02:19:47 PM

Quote from: sadpandatech on January 02, 2012, 01:59:01 PM

Quote from: yochdog on January 02, 2012, 01:56:34 PM

I have managed to get them stable at stock clock speeds within a new installation of windows. Crossing my fingers that it continues working for a long time!

Thanks for all the suggestions everyone!

what versions of Catalyst, etc did you settle on? And please tell me you are leaving out CCC? ;p There are much friendlier OC tools available that aren't so picky or risky.

cheers

Agree on Catalyst I have found it causes nothing but problems. The default install includes it but you can safely remove it or install the driver-only and then SDK runtime seperately.

cgminer + driver + sdk is all you need. KISS.

aye, with the downloaded self installer you can extract the whole thing and then just run the 'Install Manager', which will allow you to selct just 'display driver' and 'SDK'(forget what it is called in the manager. Or just run the seperate driver and sdk installers which you will find within the extraced files.

DeathAndTaxes

donator

Activity: 1218

Merit: 1079

Gerald Davis

Quote from: sadpandatech on January 02, 2012, 01:59:01 PM

Quote from: yochdog on January 02, 2012, 01:56:34 PM

I have managed to get them stable at stock clock speeds within a new installation of windows. Crossing my fingers that it continues working for a long time!

Thanks for all the suggestions everyone!

what versions of Catalyst, etc did you settle on? And please tell me you are leaving out CCC? ;p There are much friendlier OC tools available that aren't so picky or risky.

cheers

Agree on Catalyst I have found it causes nothing but problems. The default install includes it but you can safely remove it or install the driver-only and then SDK runtime seperately.

cgminer + driver + sdk is all you need. KISS.

sadpandatech

hero member

Activity: 504

Merit: 500

Quote from: yochdog on January 02, 2012, 01:56:34 PM

I have managed to get them stable at stock clock speeds within a new installation of windows. Crossing my fingers that it continues working for a long time!

Thanks for all the suggestions everyone!

what versions of Catalyst, etc did you settle on? And please tell me you are leaving out CCC? ;p There are much friendlier OC tools available that aren't so picky or risky.

cheers

yochdog

legendary

Activity: 2044

Merit: 1000

I have managed to get them stable at stock clock speeds within a new installation of windows. Crossing my fingers that it continues working for a long time!

Thanks for all the suggestions everyone!

DeathAndTaxes

donator

Activity: 1218

Merit: 1079

Gerald Davis

Quote from: cuz0882 on January 02, 2012, 10:23:58 AM

I just had a similar problem. I set the cgminer to start on boot up, soon as it loaded I got a yellow screen and it shut off. Now if I try to mine with one of my gpu's the whole computer crashes. Pretty sure mine just got overloaded and ruined. Would not be surprised if the same thing happened to you. To bad i bought mine on ebay last week Cry

If the card was defective when you bought it use ebay buyer protection program. Open a claim w/ ebay that "product is not as adevertized". Since nobody has a clue what Bitcoin mining is try to see if you can replicate the problem w/ a game or some game benchmarking/stress testing utility like Furmark.

cuz0882

sr. member

Activity: 392

Merit: 250

I just had a similar problem. I set the cgminer to start on boot up, soon as it loaded I got a yellow screen and it shut off. Now if I try to mine with one of my gpu's the whole computer crashes. Pretty sure mine just got overloaded and ruined. Would not be surprised if the same thing happened to you. To bad i bought mine on ebay last week Cry

DeathAndTaxes

donator

Activity: 1218

Merit: 1079

Gerald Davis

Quote from: bulanula on January 02, 2012, 08:56:56 AM

Quote from: Proofer on December 29, 2011, 03:08:23 PM

Quote from: DeathAndTaxes on December 29, 2011, 10:44:34 AM

... VRM temps? (GPU-Z gives detailed VRM and other temp info)

Is there a Linux tool to show VRM temps?

Was wondering about this as well.

Sadly I don't think so. My understanding (which may be incorrect) is those supplemental values are NOT available via AMD drivers (no idea why not). GPU-Z queries the GPU BIOS for raw data and parses it. Those supplemental values are used for things like thermal throttling. This is why you can see thermal throttling (usage drops from 99% to say 90%) despite cgminer (which is looking at core temp) shows a "normal" temp.

This is the only area that windows is superior to linux. Maybe someday there will be a GPU-Z version for Linux. My understanding is that it "could" be done.

sadpandatech

hero member

Activity: 504

Merit: 500

Quote from: bulanula on January 02, 2012, 08:56:56 AM

Quote from: Proofer on December 29, 2011, 03:08:23 PM

Quote from: DeathAndTaxes on December 29, 2011, 10:44:34 AM

... VRM temps? (GPU-Z gives detailed VRM and other temp info)

Is there a Linux tool to show VRM temps?

Was wondering about this as well.

a port of gpu-z would be the ideal. the hitch is the cards that don't support reading those values from software. The few options I am familiar with are limited
read VDDC via command line
aticonfig --pplib-cmd "get activity"
Sensor 0 temp
aticonfig --odgt
You can try Radeonvolt which atleast will work with cards that support reading the values from software.
thread here; https://bitcointalksearch.org/topic/radeonvolt-hd5850-reference-voltage-tweaking-and-vrm-temp-display-for-linux-10228

Its funny that Bitcoin is poking the Linux world for such uses, which without it are almost non existent. ;p

bulanula

hero member

Activity: 518

Merit: 500

Quote from: Proofer on December 29, 2011, 03:08:23 PM

Quote from: DeathAndTaxes on December 29, 2011, 10:44:34 AM

... VRM temps? (GPU-Z gives detailed VRM and other temp info)

Is there a Linux tool to show VRM temps?

Was wondering about this as well.

Proofer

member

Activity: 266

Merit: 36

Quote from: DeathAndTaxes on December 29, 2011, 10:44:34 AM

... VRM temps? (GPU-Z gives detailed VRM and other temp info)

Is there a Linux tool to show VRM temps?

yochdog

legendary

Activity: 2044

Merit: 1000

Quote from: DeathAndTaxes on December 29, 2011, 01:30:44 PM

Quote from: Inaba on December 29, 2011, 12:33:47 PM

The second core on your 5970 is toast... have a seen a few like that. Not much you can do about it.

Have to agree that seems likely.

To confirm you can try doing a clean install of OS/drivers. Leave card at stock, run only 2nd core. If you get the same hard locks & BSOD then the core is bad.

The way that AMD designs the cards is almost like 2 independent "sub cards" connected with an internal PCIe switch. This means you can have 1 or 2 GPU fail and the other one work properly just like you can have 1 of 2 physical cards (say 2x 5870 in same rig) fail and the other work perfectly.

I am going to try this tonight. Clean install from, the ground up.

Crossing my fingers that will fix it.

mtminer

member

Activity: 86

Merit: 10

Quote from: Inaba on December 29, 2011, 12:33:47 PM

The second core on your 5970 is toast... have a seen a few like that. Not much you can do about it.

It is toast, I am in the process of sending a 5970 back, because one of the cores died.

DeathAndTaxes

donator

Activity: 1218

Merit: 1079

Gerald Davis

Quote from: Inaba on December 29, 2011, 12:33:47 PM

The second core on your 5970 is toast... have a seen a few like that. Not much you can do about it.

Have to agree that seems likely.

To confirm you can try doing a clean install of OS/drivers. Leave card at stock, run only 2nd core. If you get the same hard locks & BSOD then the core is bad.

The way that AMD designs the cards is almost like 2 independent "sub cards" connected with an internal PCIe switch. This means you can have one of the two GPUs fail and the other one work properly just like you can have 1 of 2 physical cards (say 2x 5870 in same rig) fail and the other work perfectly.

Inaba

legendary

Activity: 1260

Merit: 1000

The second core on your 5970 is toast... have a seen a few like that. Not much you can do about it.

yochdog

legendary

Activity: 2044

Merit: 1000

Quote from: DeathAndTaxes on December 29, 2011, 10:44:34 AM

Quote from: yochdog on December 29, 2011, 10:40:39 AM

I have a couple 5970's that keep crashing my systems. I am able to get one core rocking at 350 MH/s....but as soon as I start up the second core, everything freezes, the driver crashes, and sometimes there is a BSOD.

Anyone have a potential solution?

Win7 64-bit, 750W PSU, Sempron

Need more info.

IF you startup only the second core is there any problems?
IF you startup both at stock is there any problems?

Core temps look ok? VRM temps? (GPU-Z gives detailed VRM and other temp info)

I assume this is a clean install. What driver version? What miner?

How many total cards in the system? Just one?

Is there a monitor connected to this system? If so which GPU drives it (you can find it out by playing HD video on youtube and looking at GPU load monitor in GPU-Z)?

Yes, if only the second core, it all goes haywire.
Yes, everything is at stock at the moment.

Core temps look great.....60-70 range. I will have to install GUP-z to get the VRM info.

Only one card.....this is my test bed system.

It is an existing install. Using the latest ATI CCC version. Using GUIminer.

The monitor is connected to the 5970.

jamesg

vip

Activity: 1358

Merit: 1000

AKA: gigavps

Quote from: yochdog on December 29, 2011, 10:40:39 AM

I have a couple 5970's that keep crashing my systems. I am able to get one core rocking at 350 MH/s....but as soon as I start up the second core, everything freezes, the driver crashes, and sometimes there is a BSOD.

Anyone have a potential solution?

Win7 64-bit, 750W PSU, Sempron

Don't over clock the second core.

Also, your core voltages should be 1.05v.

I have some OEM 5970s that are like this. It's is infinitely better to at least have them running then to overclock too much just to have them crash all the time.

DeathAndTaxes

donator

Activity: 1218

Merit: 1079

Gerald Davis

Quote from: yochdog on December 29, 2011, 10:40:39 AM

I have a couple 5970's that keep crashing my systems. I am able to get one core rocking at 350 MH/s....but as soon as I start up the second core, everything freezes, the driver crashes, and sometimes there is a BSOD.

Anyone have a potential solution?

Win7 64-bit, 750W PSU, Sempron

Need more info.

IF you startup only the second core is there any problems?
IF you startup both at stock is there any problems?

Core temps look ok? VRM temps? (GPU-Z gives detailed VRM and other temp info)

I assume this is a clean install. What driver version? What miner?

How many total cards in the system? Just one?

Is there a monitor connected to this system? If so which GPU drives it (you can find it out by playing HD video on youtube and looking at GPU load monitor in GPU-Z)?

yochdog

legendary

Activity: 2044

Merit: 1000

I have a couple 5970's that keep crashing my systems. I am able to get one core rocking at 350 MH/s....but as soon as I start up the second core, everything freezes, the driver crashes, and sometimes there is a BSOD.

Anyone have a potential solution?

Win7 64-bit, 750W PSU, Sempron

Topic: 5970 problems - seeking suggestions (Read 1890 times)