You have pretty much the best mining board ever put to market. I have never had a problem running 6 GPUs on this board.
It is not related to the mother board.
Topic: 5gpu work, if i try with 6gpu I get error 15 claymore. Help please!! (Read 281 times)
October 04, 2017, 01:01:16 PM
It is not related to the mother board.
October 04, 2017, 11:24:26 AM
You have pretty much the best mining board ever put to market. I have never had a problem running 6 GPUs on this board.
October 04, 2017, 11:21:06 AM
normally when i get that error i swap out the riser because they are cheap. About 80% of the time that works. If that don't work a card at a time until you can duplicate that error. I'm not big on dual power supply setups, but i doubt thats the issue.
Okay will try that tomorrow.
Otherewise could the motherboard be the problem?
October 04, 2017, 07:39:17 AM
normally when i get that error i swap out the riser because they are cheap. About 80% of the time that works. If that don't work a card at a time until you can duplicate that error. I'm not big on dual power supply setups, but i doubt thats the issue.
October 04, 2017, 07:33:44 AM
Hey guys!
I am building a 6x Nvidia Gigabyte p106-100 mining rig. I use H81 PRO BTC R2.0 motherboard, 4gb ram and 1x 700w technoware psu+1x 500w technoware.
When I try to mine with 6 gpu I get "Error 15, cannot get temperature." or something like that and bunch of red errors. Then claymore restarts itself and starts working with 5gpu and continues to do so. I have tried disconnecting random GPU and then it works normal, even if I plug out 2 or 3 random GPUs one at the time it works with 5, so it shoudn't be the gpu or raiser failure?
I have tried connecting motherboard + 3 and then 4 gpus on 700w PSU, then I tried connecting motherboard +2 and then 3 GPUs on 500w PSU, still the same problem. I have added molex cable to motherboard, set GEN1, tried literally everything I could think of...
When mining I have touched GPU to see which one is cold, tried that one only and it worked normally.
I am really desperate here, any advice will be thankful!
I am building a 6x Nvidia Gigabyte p106-100 mining rig. I use H81 PRO BTC R2.0 motherboard, 4gb ram and 1x 700w technoware psu+1x 500w technoware.
When I try to mine with 6 gpu I get "Error 15, cannot get temperature." or something like that and bunch of red errors. Then claymore restarts itself and starts working with 5gpu and continues to do so. I have tried disconnecting random GPU and then it works normal, even if I plug out 2 or 3 random GPUs one at the time it works with 5, so it shoudn't be the gpu or raiser failure?
I have tried connecting motherboard + 3 and then 4 gpus on 700w PSU, then I tried connecting motherboard +2 and then 3 GPUs on 500w PSU, still the same problem. I have added molex cable to motherboard, set GEN1, tried literally everything I could think of...
When mining I have touched GPU to see which one is cold, tried that one only and it worked normally.
I am really desperate here, any advice will be thankful!
Jump to: