Author

Topic: 6 GPU Aluminum Mining Case Rig Open Air Frame - NEW - Priority Mail (Read 435 times)

newbie
Activity: 68
Merit: 0
can i buy one of it in coin? do u accept paypal or eth or btc?

i live in salina, ks.

how much is it?

$120 shipped.
yes, you can pay with coin.
send me a PM and we can work on the details.
newbie
Activity: 55
Merit: 0
can i buy one of it in coin? do u accept paypal or eth or btc?

i live in salina, ks.

how much is it?
newbie
Activity: 68
Merit: 0
volume discounts are available.
newbie
Activity: 68
Merit: 0
lowered the price a little.
newbie
Activity: 68
Merit: 0
What cards are you wanting to use with the frame?
The crossbar is currently secured with a bolt, you can see it in the pictures (above).

https://www.4runrun.com/wp-content/uploads/2018/02/Rack-Joint-Holes.jpg

An L bracket like this will allow you to position the crossbar in any location.  Yes, you could drill new holes to achieve the same result.
legendary
Activity: 2746
Merit: 1181
If you remove that nut, yes, you could move the bar, but you would need L brackets to support it.



Hi,

Maybe i'm not seeing it the way you are describing, but that bar has a screw on each side holding it in place, correct? And if you loosen that screw you can't slide the bar forward or back?  If you need an L Bracket to support it if you move it, what is supporting it now? or is it actually a drilled out hole to only fit in that exact position?

thanks!
newbie
Activity: 68
Merit: 0
Hey would you be willing to share the STL file for the fan bridge piece.. I got two fans i want to bridge together and that would work perfect

I don't but I can send you a couple of the fan bridge pieces.
hero member
Activity: 672
Merit: 500
Hey would you be willing to share the STL file for the fan bridge piece.. I got two fans i want to bridge together and that would work perfect

newbie
Activity: 68
Merit: 0
If you remove that nut, yes, you could move the bar, but you would need L brackets to support it.

legendary
Activity: 2746
Merit: 1181


Red arrows:
3" and 9.5"

The kit comes with plenty of extra nuts and bolts, but no extra L brackets.


Can the nut/screw between the arrows be loosened and then slide the retaining bar forward and back?
newbie
Activity: 68
Merit: 0
https://www.4runrun.com/wp-content/uploads/2018/02/Rig_Smaller_Cards-1.png

Red arrows:
3" and 9.5"

The kit comes with plenty of extra nuts and bolts, but no extra L brackets.
newbie
Activity: 68
Merit: 0
what size GPUs will fit on the tray? meaning, does the rear gpu support beam move forward and back to support both short and long GPU's? if so can you please show an example.
thanks!
Yes, the GPU support bars can be moved/reversed to support smaller cards.
https://www.4runrun.com/wp-content/uploads/2018/02/Rig_Smaller_Cards.png
1. this bar can be adjusted vertically.
2. this one can be reversed.

Can you loosen the bar with the #2 and slide the GPU bar forward and back or its only a remove and reverse thing?

thanks!

#2 could slide if you purchased L brackets from Home Depot or if your kit comes with extra hardware.  When I get back to my shop, I will see how many extra brackets the kit comes with and I will provide some measurements.

I would guess that by reversing the support bar it would handle the smallest of cards.
legendary
Activity: 2746
Merit: 1181
what size GPUs will fit on the tray? meaning, does the rear gpu support beam move forward and back to support both short and long GPU's? if so can you please show an example.
thanks!

Yes, the GPU support bars can be moved/reversed to support smaller cards.



1. this bar can be adjusted vertically.
2. this one can be reversed.



Can you loosen the bar with the #2 and slide the GPU bar forward and back or its only a remove and reverse thing?

thanks!
newbie
Activity: 68
Merit: 0
what size GPUs will fit on the tray? meaning, does the rear gpu support beam move forward and back to support both short and long GPU's? if so can you please show an example.
thanks!

Yes, the GPU support bars can be moved/reversed to support smaller cards.

https://www.4runrun.com/wp-content/uploads/2018/02/Rig_Smaller_Cards.png

1. this bar can be adjusted vertically.
2. this one can be reversed.

legendary
Activity: 2746
Merit: 1181
what size GPUs will fit on the tray? meaning, does the rear gpu support beam move forward and back to support both short and long GPU's? if so can you please show an example.

thanks!
newbie
Activity: 68
Merit: 0
Have roughly 70 in stock.
newbie
Activity: 22
Merit: 0
Do you have multiple units or selling just one?
newbie
Activity: 68
Merit: 0
Jump to: