6 gpu mining rig problem | Bitcointalksearch.org

berk90

member

Activity: 79

Merit: 10

Quote from: xleejohnx on August 20, 2016, 06:19:10 AM

im getting this when i have all of them plugged in Code 12: This device cannot find enough free resources that it can use..
3 of them say that untill i take two then it runs normal with 4
part list
BIOSTAR RACING Z170GT7
Crucial 8GB DDR4 2133
Intel Core i3-6100 3M 3.7 GHz
(6) AMD RX 470s

any ideas would be helpful?

Try to run with H81 chipset motherboard

xleejohnx

hero member

Activity: 672

Merit: 500

still couldnt get the board to do more than 4 cards so im going to call biostar and see if the board will do anything over 4 cards
ill update this monday if the mobo can thanks for the help

xleejohnx

hero member

Activity: 672

Merit: 500

Quote from: Cryptozillah on August 20, 2016, 09:28:32 AM

After some research there seem like many skylake mobos seem to have this problem.
Try disabling all crap that is not used in bios, like sound and so on.

I'll try this when I get back home
4 lanes are running pcie 3.0 so I'll change them to 2.0 see if it frees up anymore resources

Mzie

full member

Activity: 140

Merit: 100

Can u share a pic of your connections

Cryptozillah

hero member

Activity: 687

Merit: 502

After some research there seem like many skylake mobos seem to have this problem.
Try disabling all crap that is not used in bios, like sound and so on.

Cryptozillah

hero member

Activity: 687

Merit: 502

Quote from: xleejohnx on August 20, 2016, 08:21:16 AM

Quote from: Cryptozillah on August 20, 2016, 08:10:36 AM

Quote from: xleejohnx on August 20, 2016, 06:19:10 AM

im getting this when i have all of them plugged in Code 12: This device cannot find enough free resources that it can use..
3 of them say that untill i take two then it runs normal with 4
part list
BIOSTAR RACING Z170GT7
Crucial 8GB DDR4 2133
Intel Core i3-6100 3M 3.7 GHz
(6) AMD RX 470s

any ideas would be helpful?

Do you install all cards at once ?
Install one card and then the driver. When the driver are installed shut down and add one more card, boot and check that the other card is detected in device manager. Shut down and repeat until all cards are detected.

edit. if you get all cards to be detected the code 12 mean that there is "not enough free resources"
Try increasing the virtual memory to 16GB

I did do one card at a time all the cards got detected plus I increased the v memory to 16gb
Still got the error.. I pulled one card out leaving 5 still got the same error.
It is also a fresh install of w10 only downloaded drivers and claymore

Really wierd, i run six 480s with win 10 without problems.
I am pretty sure i have seen more people writing about that problem here in other threads.

xleejohnx

hero member

Activity: 672

Merit: 500

Quote from: Cryptozillah on August 20, 2016, 08:10:36 AM

Quote from: xleejohnx on August 20, 2016, 06:19:10 AM

im getting this when i have all of them plugged in Code 12: This device cannot find enough free resources that it can use..
3 of them say that untill i take two then it runs normal with 4
part list
BIOSTAR RACING Z170GT7
Crucial 8GB DDR4 2133
Intel Core i3-6100 3M 3.7 GHz
(6) AMD RX 470s

any ideas would be helpful?

Do you install all cards at once ?
Install one card and then the driver. When the driver are installed shut down and add one more card, boot and check that the other card is detected in device manager. Shut down and repeat until all cards are detected.

edit. if you get all cards to be detected the code 12 mean that there is "not enough free resources"
Try increasing the virtual memory to 16GB

I did do one card at a time all the cards got detected plus I increased the v memory to 16gb
Still got the error.. I pulled one card out leaving 5 still got the same error.
It is also a fresh install of w10 only downloaded drivers and claymore

Cryptozillah

hero member

Activity: 687

Merit: 502

Quote from: xleejohnx on August 20, 2016, 06:19:10 AM

im getting this when i have all of them plugged in Code 12: This device cannot find enough free resources that it can use..
3 of them say that untill i take two then it runs normal with 4
part list
BIOSTAR RACING Z170GT7
Crucial 8GB DDR4 2133
Intel Core i3-6100 3M 3.7 GHz
(6) AMD RX 470s

any ideas would be helpful?

Do you install all cards at once ?
Install one card and then the driver. When the driver are installed shut down and add one more card, boot and check that the other card is detected in device manager. Shut down and repeat until all cards are detected.

edit. if you get all cards to be detected the code 12 mean that there is "not enough free resources"
Try increasing the virtual memory to 16GB

xleejohnx

hero member

Activity: 672

Merit: 500

Quote from: LoneRangir on August 20, 2016, 07:29:09 AM

Which OS?

Windows 10

LoneRangir

hero member

Activity: 615

Merit: 500

Which OS?

xleejohnx

hero member

Activity: 672

Merit: 500

im getting this when i have all of them plugged in Code 12: This device cannot find enough free resources that it can use..
3 of them say that untill i take two then it runs normal with 4
part list
BIOSTAR RACING Z170GT7
Crucial 8GB DDR4 2133
Intel Core i3-6100 3M 3.7 GHz
(6) AMD RX 470s

any ideas would be helpful?

Topic: 6 gpu mining rig problem (Read 2202 times)