-f 0 makes it work the hardest.. or just remove it.
the only real use for it is if you plan to use your miner as your workstation also. so thus -f 25 to
back off on them mining.
but in general poclbm, -v -w128 or -v -w256 are the best choices.
use phoenix and phatk2 for 58xx cards.
Topic: 6950 flash to 6970 help (Read 1787 times)
-f flag basically is like agreesion. -f 0 means total laggy desktop.
-f 2 makes mgmt a bit easier when you have to.
-f 30 will make desktop a lot more useable.
basically try this if you plan to use it as a desktop pc.
-f 25 -v -w 128
but you need to overclock the gpu and lower ram speed. please make sure you understand what i am talking about.
-f 2 makes mgmt a bit easier when you have to.
-f 30 will make desktop a lot more useable.
basically try this if you plan to use it as a desktop pc.
-f 25 -v -w 128
but you need to overclock the gpu and lower ram speed. please make sure you understand what i am talking about.
I tried those flags on my 6970 and my 5850 and "-v -w 128" is by far the fastest of the lot. I tried all the ones you suggested and they were all about 30 Mhash/s slower than -v -w 128.
i would start walking the clock speed up in increments of 10. if it crashes you went to far.. back down 10.
i would hope you can get it up to 940 pretty easily.
ram.. just try to lower it down until you hit the lowest you can go... stopping at 300-350
i would hope you can get it up to 940 pretty easily.
ram.. just try to lower it down until you hit the lowest you can go... stopping at 300-350
k so im gonna try 890/500 gpu/ram. what is upper limit and what do i enter there?
k i have memory all the way down on my ati ccc to 1250. gpu maxed at 840. do i need to edit my rom w rbe that was listen above and flash it? if so what would you recommend i set it at to start with?
-f flag basically is like agreesion. -f 0 means total laggy desktop.
-f 2 makes mgmt a bit easier when you have to.
-f 30 will make desktop a lot more useable.
basically try this if you plan to use it as a desktop pc.
-f 25 -v -w 128
but you need to overclock the gpu and lower ram speed. please make sure you understand what i am talking about.
-f 2 makes mgmt a bit easier when you have to.
-f 30 will make desktop a lot more useable.
basically try this if you plan to use it as a desktop pc.
-f 25 -v -w 128
but you need to overclock the gpu and lower ram speed. please make sure you understand what i am talking about.
look into the program called msi after burner so you can bump up the clock speed on the gpu and lower the ram speed to use less power.
flags are cool and all.. but that clock speed is key.
flags are cool and all.. but that clock speed is key.
everything is maxed out. still only 330. 340 if i add -f 0 flag. but i can only do that when im sleepin etc cuz it makes my computer run funny/freeze. i have no idea what flags do anyways i jus troll for em n test em myself
overclock that puppy. you should get 360 no problem.
it gets 330 mhps w.o the extra shaders anyways from other peoples posts i guess that isnt too bad... that hardware comparison site is slightly deceiving as i was expecting 360 out of the box o well. im gonna get 1 more 6950 n then start going w the 5970s.
thanks brunic i did just as u said in like 2 minutes. those stupid scripts were killing my game. unfortunately i didnt get any extra shaders. oh well. at least i know how to do it for my next card 
i appreciate the support guys. im goin to bed. lol
i appreciate the support guys. im goin to bed. lol 
DON'T use the 6970 BIOS. You only need to unlock the shaders, not to change clocks and voltage.
Get this software: http://www.techpowerup.com/rbe/
1) Using ATI WIN flash, extract your 6950 BIOS.
2) Use RBE(be sure it's version 1.28) to unlock the shaders (Go in Additional features, the option is there) on the BIOS you extracted.
3) Flash your modified BIOS back with ATI Win Flash.
4) Pray that you have a unlockable 6950.
Even if you have a reference 6950, it seems it's not all of them who can be unlocked. We had four of them, but only two had additional shaders, even if we've unlocked the four cards correctly. Unlocking the shaders give around 40 MHash more.
Get this software: http://www.techpowerup.com/rbe/
1) Using ATI WIN flash, extract your 6950 BIOS.
2) Use RBE(be sure it's version 1.28) to unlock the shaders (Go in Additional features, the option is there) on the BIOS you extracted.
3) Flash your modified BIOS back with ATI Win Flash.
4) Pray that you have a unlockable 6950.
Even if you have a reference 6950, it seems it's not all of them who can be unlocked. We had four of them, but only two had additional shaders, even if we've unlocked the four cards correctly. Unlocking the shaders give around 40 MHash more.
k so how can i keep it a 6950 n unlock shaders. ive tried the 6970 n get bluescreen. just need a modded 6950 file. i tried using that second link i posted to mod my saved rom but it keeps saying it cant find the original.bin file which is sitting in the folder next to the run.bin lol. so beat....
i did not upgrade the card to a 6970.. i just used some tools to unlock the shaders.. and this was on reference model 6950s.. which
it seems you sorta have.. cause it has the dip switch.
start here and read carefully
http://www.techpowerup.com/articles/overclocking/159
it seems you sorta have.. cause it has the dip switch.
start here and read carefully
http://www.techpowerup.com/articles/overclocking/159
UPDATE: reversed my flash and followed these instructions posted here (https://bitcointalksearch.org/topic/optimizing-ati-performance-6950-in-particular-3475) still no more shaders.... wtf....
k so i was reading i can flash my 6950 to 6970 bios unlocking shaders. i have a sapphire 6950 2gb. so i figured id give it a try. found the switch by crossfire connector. it isnt labeled so i left it where it was had to admin to dos then ran atiwinflash -unlockrom 0 then atiwinflash -f -p 0 (file name of downloaded rom for sapphire 6970) which i downloaded from (http://www.techpowerup.com/vgabios/88845/Sapphire.HD6970.2048.101124.html) nothing worked. so i shutdown switch the switch to the opposite position it was in and rebooted. repeated the previous steps and it said that it was complete in otherwords and i should restart. restarted. blue screen. tried to use hdmi and dvi ports. no luck. hard power down. flipped switch back to factory position. booted up. says i still have the original amount of shaders and original bios. also read that for some reason u cant unlock some cards and that there is random luck involved? lolololol. dont understand y that is but anywho. is this one of those situations? please advise. thx.
Jump to: