7950 Cgminer 350 Kh/s need help modding bios

Sonny

hero member

Activity: 868

Merit: 1000

Quote from: krazietek on February 10, 2014, 12:43:15 PM

Sonny,

At this time i am running at about 58-60C. I have been running 24hrs with no issues after re-install and adjusting USB/PCIe sleep settings.

OK, good to hear your problems are all solved now

krazietek

newbie

Activity: 6

Merit: 0

Sonny,

At this time i am running at about 58-60C. I have been running 24hrs with no issues after re-install and adjusting USB/PCIe sleep settings.

Sonny

hero member

Activity: 868

Merit: 1000

Quote from: krazietek on February 09, 2014, 02:48:08 PM

Just so i don't want to leave the thread with what ended up being the issue with my Sapphire 7950.

1. I did not have the set allocation at the beginning of my batch file. I did do it in DOS but for some reason the memory was still being allocated.
What this did was allow me to get over the TC - 8192. Also I added the "del *.bin" at the top of the batch file because of what i read the .bin files can cause issues.

del *.bin
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_MAX_ALLOC_PERCENT 100

2. Also i re-installed windows due to GPU-Z was telling me my AMD drivers were having errors. I was playing with different drivers maybe they all did not get removed properly and causing conflicts.

3. I was having a issue where every hour or so my PC would shut down and i noticed that the USB devices were going to sleep. I had all ready ran through my power settings ensuring they were set to "never sleep/shut down", but i did not do it to the USB or the PCIe settings so i am assuming that did help and or issue #2 might have had something to do with that as well.

I am running at about ~660 kh/s.

Thank you for all the replies! Cool

2. You are advised to remove a driver completely before installing a new one.
http://support.amd.com/en-us/kb-articles/Pages/GPU57RemoveOldGraphicsDrivers.aspx

3. Is your GPU overheated?

krazietek

newbie

Activity: 6

Merit: 0

Just so i don't want to leave the thread with what ended up being the issue with my Sapphire 7950.

1. I did not have the set allocation at the beginning of my batch file. I did do it in DOS but for some reason the memory was still being allocated.
What this did was allow me to get over the TC - 8192. Also I added the "del *.bin" at the top of the batch file because of what i read the .bin files can cause issues.

del *.bin
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_MAX_ALLOC_PERCENT 100

2. Also i re-installed windows due to GPU-Z was telling me my AMD drivers were having errors. I was playing with different drivers maybe they all did not get removed properly and causing conflicts.

3. I was having a issue where every hour or so my PC would shut down and i noticed that the USB devices were going to sleep. I had all ready ran through my power settings ensuring they were set to "never sleep/shut down", but i did not do it to the USB or the PCIe settings so i am assuming that did help and or issue #2 might have had something to do with that as well.

I am running at about ~660 kh/s.

Thank you for all the replies! Cool

InCoinsITrust

member

Activity: 112

Merit: 10

try to use tc 16320 and -g 1 option. I can get from 7950's atleast 660 kh/s

anyone4u

full member

Activity: 140

Merit: 100

Quote from: balanghai on February 06, 2014, 07:50:06 AM

Hey try having TC-8000 and then intensity 15. Are you using the same card to run your monitor? If so you will have problems.

i usually run regular script at 630-637ish atm khash and run my monitor off the 7950 also,. I try to use vga with on board graphics but it won't work with 7950 plugged into pcie ports. I tried lots just like Ive been trying to mine this coin for a while but never get past intensity 8, just like I never get past getting my vga to display with the onboard graphics card instead of having to go dvi or whatever the other plug is on the 7950 Raydon

techcoin12

newbie

Activity: 23

Merit: 0

try

TC = 22400
-I 19
-g 1

g 2 is not good for 7950 that works better on 7970

good luck

krazietek

newbie

Activity: 6

Merit: 0

Yes i am using that same card to run my monitor. Do you think it would hold me back from 350 Kh/s to the projected ~550KH/s? My board does not have a on board graphics card so i can get a cheap one just to run my video. I used another set GPU/MEM clocks with the 8192 i got to 580 kH/s but my CGminer said "Dead" in the morning.

balanghai

sr. member

Activity: 364

Merit: 253

Hey try having TC-8000 and then intensity 15. Are you using the same card to run your monitor? If so you will have problems.

Sonny

hero member

Activity: 868

Merit: 1000

https://litecoin.info/Mining_hardware_comparison
You may refer to the cgminer config there.

krazietek

newbie

Activity: 6

Merit: 0

Hello i have a Single Saphire 7950
I was only able to run reliably at 50c 120 kh/s and now i can get to 350 KH/s with no hardware errors.
I have read that i can unlock my GPU and allow me to shut off boost and the Thread concurrency/memory limits which im hoping can I get to the 500-600 Kh/s that this card is capable of, if some one could help me with some info on what bios i should use with some setup help/settings, that would be great.
The max i can get my settings to with out a ton of hardware errors,

TC = 8192
I = 13
Look up gap = 2

Topic: 7950 Cgminer 350 Kh/s need help modding bios (Read 959 times)