Topic: 7970 BAMT Config Help (Read 1932 times)

what is it?

Did not help, installing windows 7 until I can figure it out.....

Here is what mine is set for.  Maybe there is something in there that can help...

intensity 19
vectors 1
worksize 256
kernal scrypt
lookup-gap 0
thread-concurrency 24000
shaders 0
api-port 4028
expiry 120
gpu-dyninterval 7
gpu-platform 0
gpu-threads 1
gpu-engine 1053
gpu-memclock 1451
gpu-powertune 20
log 5
no-pool-disable true
queue 1
scan-time 60
scrypt true
shares 0

Played with that for a while, did not really change hash rate, even change threads down to 1 intensity to 19 and concurrency at 21912 and no impovements really.

Play around with this number:

"thread-concurrency" : "8192" ,


Changing to something about double that should do it.  But do what works best for your system.


Good luck!



Edit - just saw that I should have noticed your intensity was a little low.  I would also move that up towards 18ish.

Hello, I just started using BAMT yesterday and finally got it working but am not getting the hash rate I would like. Below I have attached my cgminer.config file that I have been tweaking with for a while and has not changed my hash rate at all really. I am trying to mine scrypt/LTC and says on cgminer I am only get 0.41 Mhash which is only about 300-400 khash. I tried to overclock the GPU in the cgminer. config file but on the BAMT web dashboard it shows no overclock to the core or memory, but when I go into overdrive and change the settings then it changes on the web dashboard but when I close overdrive it says settings could not be applied and they obviously are not because the hash rate is still low. If anyone has any suggestions or if I should just not use BAMT anymore that would be great, before I was guiminer-scrypt with 690 khash which is nothing special but is better than what I am getting now. I did also edit the bamt config file and pools but I do not know that they are right, I am assuming the low hash rate is because of an overclock config issue but I have not been using cgminer for longer than a day and need some help, Thanks!


{
"pools" : [
   {
      "url" : "stratum+tcp://stratum.give-me-ltc.com:3333",
      "user" : "",
      "pass" : ""
   },
   {
      "url" : "",
      "user" : "",
      "pass" : ""
   }
]
,
"auto-fan" : true,
"auto-gpu" : true,
"temp-cutoff" : "84",
"temp-overheat" : "81",
"temp-target" : "77",
"gpu-fan" : "0-100",
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "2",
"thread-concurrency" : "8192" ,
"shaders" : "0",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1000,1000,1000",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}