Author

Topic: 8 cores fpga bitcoin miner :1.6Ghash/s ,85W total. (Read 16461 times)

legendary
Activity: 1288
Merit: 1227
Away on an extended break
quote:
" Chinese is the preferred langue, if you can not type chinese, please write it in simple english. any loses caused by mis-understanding will assume by you."

The clause about being able to write simple english if you want to order, gives me great confidence in their programming skils. It is obvious, from the pictures, that the green led's are working as advertised.




I know a lot of Chinese people who can code but cannot speak a word of English. It's the same apparently for the Russians too.

The price is quite steep though considering that ASICS are looming...(or not)


legendary
Activity: 1064
Merit: 1000
nice board
legendary
Activity: 1666
Merit: 1057
Marketing manager - GO MP
quote:
" Chinese is the preferred langue, if you can not type chinese, please write it in simple english. any loses caused by mis-understanding will assume by you."

The clause about being able to write simple english if you want to order, gives me great confidence in their programming skils. It is obvious, from the pictures, that the green led's are working as advertised.





Oh I have great confidence that they are able to operate locally produced machinery built with confidence in their countries monopoly over rare earth minerals.
legendary
Activity: 1666
Merit: 1057
Marketing manager - GO MP
That's a really nice looking miner! But for $2000+, good luck selling any of them. You're about a year too late.

Or just in time, it all depends on that one little detail...
sr. member
Activity: 504
Merit: 250
quote:
" Chinese is the preferred langue, if you can not type chinese, please write it in simple english. any loses caused by mis-understanding will assume by you."

The clause about being able to write simple english if you want to order, gives me great confidence in their programming skils. It is obvious, from the pictures, that the green led's are working as advertised.



legendary
Activity: 1022
Merit: 1000
BitMinter
Looks like a great product but you're about one year too late.  Undecided
legendary
Activity: 952
Merit: 1000
That's a really nice looking miner! But for $2000+, good luck selling any of them. You're about a year too late.
newbie
Activity: 14
Merit: 0
direct buy :http://www.aliexpress.com/item/8-cores-fpga-bitcoin-miner/730738103.html

8 cores fpga bitcoin miner ,this board is most top bitcoin miner in china,we have sell more than 300 pcs last year(2012) !

my email: [email protected]


   We can send outside china(  to US,EU,AUS etc) ,you can pay throught Escrow Service(a chinese PAYPAL),or bitcon,or T/T

8 cores fpga bitcoin miner:
Details:

    8 Spartan-6 LX150-3FGG484C FPGAs:just as ICARUS X4 on one board,you can use ICARUS rom and software.
    USB interface for configuration and mining communication.
    Power supplied through 6-pin ATX PCI-E connector(min 100W ) .
    1.3 GH/s guaranteed, 1.6GH/s typical.
    85 W power consumption measured at 1.6 GH/s (more measurements pending).
    JTAG available for development and debugging (headers are not populated by default).

New features for the  Rev 3:

    Heatsink mounting holes, compatible with many heatsinks designed for the Northbridge chipset (59MM).
    Additional clearance to allow for larger heatsinks.
    3-pin headers to power 8 standard 12V fans.
    LEDs to indicate that the FPGAs are configured properly.
    Mounting hole size diameter increased to allow for #6 size screws.
    238 x 205.5 mm overall size



 

Power:
To power the board, one can use either a standard ATX power supply with a spare 6-pin PCI-E connector. Note that the rev3 board has headers to power 8 fans. If these are used, be sure to include the power consumption of the fans when choosing a suitable power supply.



Software:
The board is currently supported by many software miners: such as CGMINER. Both are open source and publicly available and both work on Windows, Linux, and Mac.
You can very easy control throught this OPNEWRT base linux controler ,just use a web page ! Don't need install any software and drivers!




Purchase:
 The board priced at $1999. An board with included heatsinks is priced at $2058.

 OPNEWRT base linux controler: $59

All included an USB cable ,you just add an ATX power and can start mine immediacy!

 

What`s Escrow?
       The Escrow service on AliExpress is powered by Alipay.com, a leading third-party online payment platform from the Alibaba Group. Escrow allows you to pay securely online without exposing your credit card details. You can also track delivery of your order and payment is only released to the supplier after you confirm you’ve received the order. Escrow is fast, safe and easy to use!
       For Buyers:
       - Payment will only be released to the supplier after you confirm you’ve received the order.
       - Track delivery using a unique tracking number on the shipping company’s website.
       For Suppliers:
       - Escrow verifies the credit card details for every transaction.
       - Escrow only asks you to ship the order after we confirm payment is received.
order details:
    warranty for this product. before shipping, all boards test for weeks. and please test them in 48Hrs after you received them. if any hardware fault happened, you can send it to me and i'll repair it if i can, you only need pay the parts cost and factory cost (firse 1 year is free )and shipment cost.
 

shipment cost and tax is pay by customer. shipping is using EMS.


  Chinese is the preferred langue, if you can not type chinese, please write it in simple english. any loses caused by mis-understanding will assume by you. in this email, give me your shipment address, i will check it for the shipment cost. please follow this format:

A: what you want, and quantity.
B: your address:
       name:
       company(optional):
       house number, street number, district:
       city:
       province:
       country:
       ZIP:
       TEL:
Jump to: