Topic: 990FXA-GD65 showing only 2 of 6. (Read 764 times)
I run the same board. Yes you need the presence mod, but in my experience I needed them on the x16 slots as well, when using 1x-16x risers.
Yes, it's very simple, short the pins A1 and B17 with a piece of very thin wire so that it can get in, you can reuse it from some piece of old computer-related equipment or electronics.
If it doesn't work after that post more info (driver versions, OS, BIOS ver, etc.)
If it doesn't work after that post more info (driver versions, OS, BIOS ver, etc.)
So basically i need to short short pin every x1 slot, right ?
By the way, BIOS at 19.9, ubuntu 12.04 and Catalyst 13.3
Thanks for trying to help :-)
Yes, it's very simple, short the pins A1 and B17 with a piece of very thin wire so that it can get in, you can reuse it from some piece of old computer-related equipment or electronics.
If it doesn't work after that post more info (driver versions, OS, BIOS ver, etc.)
If it doesn't work after that post more info (driver versions, OS, BIOS ver, etc.)
Does anyone knows if there is any special trick, like shortpin / etc.., to make the 990FXA-GD65 work with 6 cards?
It only shows 2 of the 6 cards ... All of them are plugged using powered risers.
ideas?
It only shows 2 of the 6 cards ... All of them are plugged using powered risers.
ideas?
Jump to: