Topic: a few quistion about mining! (Read 137 times)
If you choose to run a LGA1151 board or a platform that supports DDR4, there aren't really 2GB sticks unlike with DDR3 so 4GB is pretty standard nowadays. 2GB should work fine if you're mining on an older board.
hi friends
1-How much memory error is allowed and is standard?Is it related to the duration of the working rig?
2-How much each riser is consumed(Estimated)?Does it have a relationship with the card??
3-What is Specifications of stable rig?
4-bios modding Is that just to set 1500 memory strap to 1750 and upper?
It sounds like English might not be your primary language, but I'll try to understand.1-How much memory error is allowed and is standard?Is it related to the duration of the working rig?
2-How much each riser is consumed(Estimated)?Does it have a relationship with the card??
3-What is Specifications of stable rig?
4-bios modding Is that just to set 1500 memory strap to 1750 and upper?
1) You shouldn't have any memory errors. 4 GB is the standard amount of RAM in a typical rig. Mining rigs require a minimal amount of memory. You might even get away with 2 gigs on a Linux-based machine. Mining rigs memory should be just enough to run the chosen os smoothly during setup.
2)Each riser might require a watt or so overhead in addition to supplying power to the card. It best not to power more than two risers from a single string of cables. SATA only provides 55 watts and it is possible for a card to draw up to 75 watts, so Molex and PCIE power is usually better than SATA for power to risers.
3) My most stable rig has 6 gtx 1050 ti's on an Onda D1800. It is a board that supports six cards, and it doesn't need risers. My miners with risers are less stable.
4) It sounds like you are describing the BIOS mod to RX-470, 480, 570, 580. I think what you are stating is true for the 4 GB models.
hi friends
1-How much memory error is allowed and is standard?Is it related to the duration of the working rig?
2-How much each riser is consumed(Estimated)?Does it have a relationship with the card??
3-What is Specifications of stable rig?
4-bios modding Is that just to set 1500 memory strap to 1750 and upper?
I say few times a day is normal if you get more try downclocking or using another bios i really don't understand what do you mean by "consumed risers" but well i say get few extra shit always happens in standard terms a stable rig means decent temperatures around 50 - 70 with less than 80 percent fan speed and decent hashrate no less than 5-6 percent less than what other people say.1-How much memory error is allowed and is standard?Is it related to the duration of the working rig?
2-How much each riser is consumed(Estimated)?Does it have a relationship with the card??
3-What is Specifications of stable rig?
4-bios modding Is that just to set 1500 memory strap to 1750 and upper?
I say modding also means to apply overclock to mem and core or their voltage so you try not bother with them in future with changing os and shit.
hi friends
1-How much memory error is allowed and is standard?Is it related to the duration of the working rig?
2-How much each riser is consumed(Estimated)?Does it have a relationship with the card??
3-What is Specifications of stable rig?
4-bios modding Is that just to set 1500 memory strap to 1750 and upper?
1-How much memory error is allowed and is standard?Is it related to the duration of the working rig?
2-How much each riser is consumed(Estimated)?Does it have a relationship with the card??
3-What is Specifications of stable rig?
4-bios modding Is that just to set 1500 memory strap to 1750 and upper?
Jump to: