Topic: A3 error log help (Read 140 times)
Any luck with this? I've been having the exact same problem since last 3 days.
Bitcoin Forum > Alternate cryptocurrencies > Mining (Altcoins) (Moderator: mprep) > A3 error log help
my bad if im wrong, i thought i was in the right place
anybody stupid enough to think all coins are BTC wouldnt be smart enough to plug in their PC so your point is moot....
my bad if im wrong, i thought i was in the right place
anybody stupid enough to think all coins are BTC wouldnt be smart enough to plug in their PC so your point is moot....
A) use the CODE icon # and paste the info in there. Reduces the text wall to be
B) The A3 is ALTCOIN hardware, not Bitcoin hardware which is where you posted...
Why do so many folks think that all coins are BTC?.....
Safe bet the mods will move this to the altcoin sections
Code:
Apr 3 19:06:11 (none) local0.notice cgminer[375]: chain 1 reinit 5067.57
Apr 3 19:06:11 (none) local0.notice cgminer[375]: chain 2 reinit 4552.05
Apr 3 19:06:11 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02930844 crc5 error,should be 00,but check as 11
Apr 3 19:06:11 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:06:12 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:06:13 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:06:13 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:06:13 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:06:13 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:06:13 (none) local0.notice cgminer[375]: open device over
Apr 3 19:06:13 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:06:13 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:06:14 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:06:14 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:06:14 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:06:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:06:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:06:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:06:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:06:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:06:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:06:16 (none) local0.notice cgminer[375]: open device over
Apr 3 19:06:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:06:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:06:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:06:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:06:18 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:08:13 (none) local0.notice cgminer[375]: chain 0 reinit 76177.07
Apr 3 19:08:13 (none) local0.notice cgminer[375]: chain 2 reinit 4895.72
Apr 3 19:08:13 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:08:14 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:08:15 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:08:15 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:08:15 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:08:15 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:08:15 (none) local0.notice cgminer[375]: open device over
Apr 3 19:08:15 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:08:15 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:08:16 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:08:16 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:08:16 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:08:17 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x6d9429ae crc5 error,should be 00,but check as 04
Apr 3 19:08:17 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:08:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:08:18 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:08:18 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:08:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:08:18 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:08:18 (none) local0.notice cgminer[375]: open device over
Apr 3 19:08:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:08:18 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:08:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:08:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:08:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 0 reinit 135963.83
Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 1 reinit 5840.44
Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 2 reinit 4466.25
Apr 3 19:10:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:10:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:10:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:10:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:10:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:10:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:10:16 (none) local0.notice cgminer[375]: open device over
Apr 3 19:10:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:10:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:10:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:10:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:10:17 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:10:18 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:10:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:10:20 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:10:20 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:10:20 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:10:20 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:10:20 (none) local0.notice cgminer[375]: open device over
Apr 3 19:10:20 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:10:20 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:10:21 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:10:21 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:10:21 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:10:22 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x2f42b1e4, diff: 0xa3, wc: 0x19, crc_received: 0xff, crc_checked: 0x10,chainid: 0x00
Apr 3 19:10:22 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:10:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:10:23 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:10:23 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:10:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:10:23 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:10:23 (none) local0.notice cgminer[375]: open device over
Apr 3 19:10:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:10:23 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:10:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:10:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:10:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:12:16 (none) local0.notice cgminer[375]: chain 0 reinit 4466.47
Apr 3 19:12:16 (none) local0.notice cgminer[375]: chain 1 reinit 5067.67
Apr 3 19:12:16 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x44238c01, diff: 0xa2, wc: 0x5e, crc_received: 0xff, crc_checked: 0x18,chainid: 0x01
Apr 3 19:12:16 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:12:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:12:18 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:12:18 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:12:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:12:18 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:12:18 (none) local0.notice cgminer[375]: open device over
Apr 3 19:12:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:12:18 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:12:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:12:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:12:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:12:20 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x40c29ca0 crc5 error,should be 00,but check as 05
Apr 3 19:12:20 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:12:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:12:21 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:12:21 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:12:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:12:22 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:12:22 (none) local0.notice cgminer[375]: open device over
Apr 3 19:12:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:12:22 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:12:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:12:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:12:23 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:14:18 (none) local0.notice cgminer[375]: chain 1 reinit 4637.92
Apr 3 19:14:18 (none) local0.notice cgminer[375]: chain 2 reinit 80392.75
Apr 3 19:14:18 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:14:18 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:14:19 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:14:19 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:14:19 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:14:19 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:14:19 (none) local0.notice cgminer[375]: open device over
Apr 3 19:14:19 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:14:19 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:14:20 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:14:20 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:14:20 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:14:21 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0xc48bfe01, diff: 0xa3, wc: 0x5c, crc_received: 0xff, crc_checked: 0x00,chainid: 0x01
Apr 3 19:14:21 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:14:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:14:23 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:14:23 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:14:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:14:23 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:14:23 (none) local0.notice cgminer[375]: open device over
Apr 3 19:14:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:14:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:14:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:14:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:14:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:16:20 (none) local0.notice cgminer[375]: chain 0 reinit 4724.12
Apr 3 19:16:20 (none) local0.notice cgminer[375]: chain 2 reinit 5067.71
Apr 3 19:16:20 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:16:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:16:21 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:16:21 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:16:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:16:21 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:16:21 (none) local0.notice cgminer[375]: open device over
Apr 3 19:16:21 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:16:21 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:16:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:16:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:16:22 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:16:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0xfa84aeaf crc5 error,should be 00,but check as 10
Apr 3 19:16:23 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:16:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:16:25 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:16:25 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:16:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:16:25 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:16:25 (none) local0.notice cgminer[375]: open device over
Apr 3 19:16:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:16:25 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:16:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:16:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:16:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 0 reinit 5411.15
Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 1 reinit 5153.51
Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 2 reinit 5067.60
Apr 3 19:18:21 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:18:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:18:23 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:18:23 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:18:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:18:23 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:18:23 (none) local0.notice cgminer[375]: open device over
Apr 3 19:18:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:18:23 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:18:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:18:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:18:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:18:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x03f84944 crc5 error,should be 00,but check as 0e
Apr 3 19:18:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:18:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:18:26 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:18:26 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:18:26 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:18:26 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:18:26 (none) local0.notice cgminer[375]: open device over
Apr 3 19:18:26 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:18:26 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:18:27 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:18:27 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:18:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:18:28 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x204aa68c, diff: 0xa3, wc: 0x00, crc_received: 0x80, crc_checked: 0x16,chainid: 0x00
Apr 3 19:18:28 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:18:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:18:30 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:18:30 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:18:30 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:18:30 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:18:30 (none) local0.notice cgminer[375]: open device over
Apr 3 19:18:30 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:18:30 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:18:31 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:18:31 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:18:31 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:20:23 (none) local0.notice cgminer[375]: chain 0 reinit 4724.10
Apr 3 19:20:23 (none) local0.notice cgminer[375]: chain 1 reinit 4552.32
Apr 3 19:20:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x012f4dc4 crc5 error,should be 00,but check as 02
Apr 3 19:20:23 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:20:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:20:25 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:20:25 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:20:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:20:25 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:20:25 (none) local0.notice cgminer[375]: open device over
Apr 3 19:20:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:20:25 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:20:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:20:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:20:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:20:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:20:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:20:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:20:28 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:20:28 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:20:28 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:20:28 (none) local0.notice cgminer[375]: open device over
Apr 3 19:20:28 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:20:28 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:20:29 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:20:29 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:20:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:22:25 (none) local0.notice cgminer[375]: chain 1 reinit 3607.25
Apr 3 19:22:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0122ba29 crc5 error,should be 00,but check as 0e
Apr 3 19:22:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:22:26 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:22:27 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:22:27 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:22:27 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:22:27 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:22:27 (none) local0.notice cgminer[375]: open device over
Apr 3 19:22:27 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:22:27 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:22:28 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:22:28 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:22:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 0 reinit 4466.25
Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 1 reinit 5067.59
Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 2 reinit 4981.53
Apr 3 19:24:27 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x62f4b2a0 crc5 error,should be 00,but check as 12
Apr 3 19:24:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:24:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:24:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:24:29 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:24:29 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:24:29 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:24:29 (none) local0.notice cgminer[375]: open device over
Apr 3 19:24:29 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:24:29 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:24:30 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:24:30 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:24:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:24:31 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:24:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:24:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:24:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:24:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:24:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:24:32 (none) local0.notice cgminer[375]: open device over
Apr 3 19:24:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:24:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:24:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:24:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:24:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:24:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x006bad96 crc5 error,should be 00,but check as 0d
Apr 3 19:24:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:24:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:24:36 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:24:36 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:24:36 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:24:36 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:24:36 (none) local0.notice cgminer[375]: open device over
Apr 3 19:24:36 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:24:36 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:24:37 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:24:37 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:24:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:26:29 (none) local0.notice cgminer[375]: chain 0 reinit 4638.10
Apr 3 19:26:29 (none) local0.notice cgminer[375]: chain 1 reinit 5668.77
Apr 3 19:26:29 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x011ea229 crc5 error,should be 00,but check as 17
Apr 3 19:26:29 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:26:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:26:31 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:26:31 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:26:31 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:26:31 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:26:31 (none) local0.notice cgminer[375]: open device over
Apr 3 19:26:31 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:26:31 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:26:32 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:26:32 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:26:32 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:26:33 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:26:33 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:26:34 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:26:34 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:26:34 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:26:34 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:26:34 (none) local0.notice cgminer[375]: open device over
Apr 3 19:26:34 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:26:34 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:26:35 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:26:35 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:26:36 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 0 reinit 4809.67
Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 1 reinit 4980.98
Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 2 reinit 3864.68
Apr 3 19:28:30 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:28:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:28:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:28:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:28:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:28:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:28:32 (none) local0.notice cgminer[375]: open device over
Apr 3 19:28:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:28:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:28:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:28:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:28:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:28:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02a21429 crc5 error,should be 00,but check as 05
Apr 3 19:28:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:28:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:28:35 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:28:35 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:28:35 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:28:35 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:28:35 (none) local0.notice cgminer[375]: open device over
Apr 3 19:28:35 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:28:35 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:28:36 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:28:36 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:28:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:28:37 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x203bbce2, diff: 0xa0, wc: 0x00, crc_received: 0x80, crc_checked: 0x17,chainid: 0x00
Apr 3 19:28:37 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:28:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:28:39 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:28:39 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:28:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:28:39 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:28:39 (none) local0.notice cgminer[375]: open device over
Apr 3 19:28:39 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:28:39 (none) local0.notice cgminer[375]: Now Set
Chain Address
Apr 3 19:28:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:28:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:28:40 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:30:32 (none) local0.notice cgminer[375]: chain 1 reinit 4638.21
Apr 3 19:30:32 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0033c928 crc5 error,should be 00,but check as 02
Apr 3 19:30:32 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:30:32 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:30:33 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:30:33 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:30:33 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:30:33 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:30:33 (none) local0.notice cgminer[375]: open device over
Apr 3 19:30:33 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:30:33 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:30:34 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:30:34 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:30:35 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
B) The A3 is ALTCOIN hardware, not Bitcoin hardware which is where you posted...
Why do so many folks think that all coins are BTC?.....
Safe bet the mods will move this to the altcoin sections
so for the 3rd time my A3 has shutdown for 45 mins it looks like and I'm not sure why, do I need to return it? Does anyone understand from the log what the problem is? Any help greatly appreciated.
sorry its so long, but this is what has happening when it was shutdown, I have no idead what most of it means.
Moderator's note: This post was edited by frodocooper to add code tags.
Code:
Apr 3 19:06:11 (none) local0.notice cgminer[375]: chain 1 reinit 5067.57
Apr 3 19:06:11 (none) local0.notice cgminer[375]: chain 2 reinit 4552.05
Apr 3 19:06:11 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02930844 crc5 error,should be 00,but check as 11
Apr 3 19:06:11 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:06:12 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:06:13 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:06:13 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:06:13 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:06:13 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:06:13 (none) local0.notice cgminer[375]: open device over
Apr 3 19:06:13 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:06:13 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:06:14 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:06:14 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:06:14 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:06:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:06:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:06:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:06:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:06:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:06:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:06:16 (none) local0.notice cgminer[375]: open device over
Apr 3 19:06:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:06:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:06:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:06:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:06:18 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:08:13 (none) local0.notice cgminer[375]: chain 0 reinit 76177.07
Apr 3 19:08:13 (none) local0.notice cgminer[375]: chain 2 reinit 4895.72
Apr 3 19:08:13 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:08:14 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:08:15 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:08:15 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:08:15 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:08:15 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:08:15 (none) local0.notice cgminer[375]: open device over
Apr 3 19:08:15 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:08:15 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:08:16 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:08:16 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:08:16 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:08:17 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x6d9429ae crc5 error,should be 00,but check as 04
Apr 3 19:08:17 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:08:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:08:18 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:08:18 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:08:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:08:18 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:08:18 (none) local0.notice cgminer[375]: open device over
Apr 3 19:08:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:08:18 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:08:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:08:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:08:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 0 reinit 135963.83
Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 1 reinit 5840.44
Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 2 reinit 4466.25
Apr 3 19:10:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:10:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:10:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:10:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:10:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:10:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:10:16 (none) local0.notice cgminer[375]: open device over
Apr 3 19:10:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:10:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:10:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:10:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:10:17 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:10:18 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:10:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:10:20 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:10:20 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:10:20 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:10:20 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:10:20 (none) local0.notice cgminer[375]: open device over
Apr 3 19:10:20 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:10:20 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:10:21 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:10:21 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:10:21 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:10:22 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x2f42b1e4, diff: 0xa3, wc: 0x19, crc_received: 0xff, crc_checked: 0x10,chainid: 0x00
Apr 3 19:10:22 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:10:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:10:23 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:10:23 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:10:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:10:23 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:10:23 (none) local0.notice cgminer[375]: open device over
Apr 3 19:10:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:10:23 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:10:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:10:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:10:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:12:16 (none) local0.notice cgminer[375]: chain 0 reinit 4466.47
Apr 3 19:12:16 (none) local0.notice cgminer[375]: chain 1 reinit 5067.67
Apr 3 19:12:16 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x44238c01, diff: 0xa2, wc: 0x5e, crc_received: 0xff, crc_checked: 0x18,chainid: 0x01
Apr 3 19:12:16 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:12:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:12:18 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:12:18 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:12:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:12:18 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:12:18 (none) local0.notice cgminer[375]: open device over
Apr 3 19:12:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:12:18 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:12:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:12:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:12:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:12:20 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x40c29ca0 crc5 error,should be 00,but check as 05
Apr 3 19:12:20 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:12:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:12:21 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:12:21 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:12:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:12:22 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:12:22 (none) local0.notice cgminer[375]: open device over
Apr 3 19:12:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:12:22 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:12:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:12:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:12:23 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:14:18 (none) local0.notice cgminer[375]: chain 1 reinit 4637.92
Apr 3 19:14:18 (none) local0.notice cgminer[375]: chain 2 reinit 80392.75
Apr 3 19:14:18 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:14:18 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:14:19 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:14:19 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:14:19 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:14:19 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:14:19 (none) local0.notice cgminer[375]: open device over
Apr 3 19:14:19 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:14:19 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:14:20 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:14:20 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:14:20 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:14:21 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0xc48bfe01, diff: 0xa3, wc: 0x5c, crc_received: 0xff, crc_checked: 0x00,chainid: 0x01
Apr 3 19:14:21 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:14:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:14:23 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:14:23 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:14:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:14:23 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:14:23 (none) local0.notice cgminer[375]: open device over
Apr 3 19:14:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:14:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:14:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:14:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:14:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:16:20 (none) local0.notice cgminer[375]: chain 0 reinit 4724.12
Apr 3 19:16:20 (none) local0.notice cgminer[375]: chain 2 reinit 5067.71
Apr 3 19:16:20 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:16:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:16:21 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:16:21 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:16:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:16:21 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:16:21 (none) local0.notice cgminer[375]: open device over
Apr 3 19:16:21 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:16:21 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:16:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:16:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:16:22 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:16:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0xfa84aeaf crc5 error,should be 00,but check as 10
Apr 3 19:16:23 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:16:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:16:25 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:16:25 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:16:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:16:25 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:16:25 (none) local0.notice cgminer[375]: open device over
Apr 3 19:16:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:16:25 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:16:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:16:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:16:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 0 reinit 5411.15
Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 1 reinit 5153.51
Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 2 reinit 5067.60
Apr 3 19:18:21 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:18:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:18:23 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:18:23 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:18:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:18:23 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:18:23 (none) local0.notice cgminer[375]: open device over
Apr 3 19:18:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:18:23 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:18:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:18:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:18:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:18:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x03f84944 crc5 error,should be 00,but check as 0e
Apr 3 19:18:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:18:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:18:26 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:18:26 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:18:26 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:18:26 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:18:26 (none) local0.notice cgminer[375]: open device over
Apr 3 19:18:26 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:18:26 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:18:27 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:18:27 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:18:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:18:28 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x204aa68c, diff: 0xa3, wc: 0x00, crc_received: 0x80, crc_checked: 0x16,chainid: 0x00
Apr 3 19:18:28 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:18:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:18:30 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:18:30 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:18:30 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:18:30 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:18:30 (none) local0.notice cgminer[375]: open device over
Apr 3 19:18:30 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:18:30 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:18:31 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:18:31 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:18:31 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:20:23 (none) local0.notice cgminer[375]: chain 0 reinit 4724.10
Apr 3 19:20:23 (none) local0.notice cgminer[375]: chain 1 reinit 4552.32
Apr 3 19:20:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x012f4dc4 crc5 error,should be 00,but check as 02
Apr 3 19:20:23 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:20:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:20:25 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:20:25 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:20:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:20:25 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:20:25 (none) local0.notice cgminer[375]: open device over
Apr 3 19:20:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:20:25 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:20:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:20:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:20:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:20:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:20:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:20:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:20:28 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:20:28 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:20:28 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:20:28 (none) local0.notice cgminer[375]: open device over
Apr 3 19:20:28 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:20:28 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:20:29 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:20:29 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:20:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:22:25 (none) local0.notice cgminer[375]: chain 1 reinit 3607.25
Apr 3 19:22:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0122ba29 crc5 error,should be 00,but check as 0e
Apr 3 19:22:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:22:26 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:22:27 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:22:27 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:22:27 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:22:27 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:22:27 (none) local0.notice cgminer[375]: open device over
Apr 3 19:22:27 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:22:27 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:22:28 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:22:28 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:22:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 0 reinit 4466.25
Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 1 reinit 5067.59
Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 2 reinit 4981.53
Apr 3 19:24:27 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x62f4b2a0 crc5 error,should be 00,but check as 12
Apr 3 19:24:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:24:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:24:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:24:29 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:24:29 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:24:29 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:24:29 (none) local0.notice cgminer[375]: open device over
Apr 3 19:24:29 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:24:29 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:24:30 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:24:30 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:24:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:24:31 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:24:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:24:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:24:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:24:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:24:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:24:32 (none) local0.notice cgminer[375]: open device over
Apr 3 19:24:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:24:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:24:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:24:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:24:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:24:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x006bad96 crc5 error,should be 00,but check as 0d
Apr 3 19:24:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:24:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:24:36 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:24:36 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:24:36 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:24:36 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:24:36 (none) local0.notice cgminer[375]: open device over
Apr 3 19:24:36 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:24:36 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:24:37 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:24:37 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:24:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:26:29 (none) local0.notice cgminer[375]: chain 0 reinit 4638.10
Apr 3 19:26:29 (none) local0.notice cgminer[375]: chain 1 reinit 5668.77
Apr 3 19:26:29 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x011ea229 crc5 error,should be 00,but check as 17
Apr 3 19:26:29 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:26:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:26:31 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:26:31 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:26:31 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:26:31 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:26:31 (none) local0.notice cgminer[375]: open device over
Apr 3 19:26:31 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:26:31 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:26:32 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:26:32 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:26:32 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:26:33 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:26:33 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:26:34 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:26:34 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:26:34 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:26:34 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:26:34 (none) local0.notice cgminer[375]: open device over
Apr 3 19:26:34 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:26:34 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:26:35 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:26:35 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:26:36 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 0 reinit 4809.67
Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 1 reinit 4980.98
Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 2 reinit 3864.68
Apr 3 19:28:30 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr 3 19:28:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:28:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr 3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr 3 19:28:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr 3 19:28:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr 3 19:28:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr 3 19:28:32 (none) local0.notice cgminer[375]: open device over
Apr 3 19:28:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr 3 19:28:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr 3 19:28:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:28:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr 3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr 3 19:28:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8,
Apr 3 19:28:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02a21429 crc5 error,should be 00,but check as 05
Apr 3 19:28:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:28:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:28:35 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:28:35 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:28:35 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:28:35 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:28:35 (none) local0.notice cgminer[375]: open device over
Apr 3 19:28:35 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:28:35 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:28:36 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:28:36 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:28:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Apr 3 19:28:37 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x203bbce2, diff: 0xa0, wc: 0x00, crc_received: 0x80, crc_checked: 0x17,chainid: 0x00
Apr 3 19:28:37 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr 3 19:28:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:28:39 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr 3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr 3 19:28:39 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr 3 19:28:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr 3 19:28:39 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr 3 19:28:39 (none) local0.notice cgminer[375]: open device over
Apr 3 19:28:39 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr 3 19:28:39 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr 3 19:28:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:28:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr 3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr 3 19:28:40 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9,
Apr 3 19:30:32 (none) local0.notice cgminer[375]: chain 1 reinit 4638.21
Apr 3 19:30:32 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0033c928 crc5 error,should be 00,but check as 02
Apr 3 19:30:32 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr 3 19:30:32 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr 3 19:30:33 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr 3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain
Apr 3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr 3 19:30:33 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr 3 19:30:33 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr 3 19:30:33 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr 3 19:30:33 (none) local0.notice cgminer[375]: open device over
Apr 3 19:30:33 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr 3 19:30:33 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr 3 19:30:34 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr 3 19:30:34 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr 3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr 3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr 3 19:30:35 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
sorry its so long, but this is what has happening when it was shutdown, I have no idead what most of it means.
Moderator's note: This post was edited by frodocooper to add code tags.
Jump to: