Topic: Advice for 6x6870 on Win7. Miners, catalyst and SDK versions? (Read 638 times)
I was able to resolve by setting the intensity to manual, 10. Not sure why but with both at dynamic, which is seemed to set to 4, there was a 30 MHash difference. Now, both set to 10 and I get about 315 out of each, which I'm happy with. Temps 73 and 76 in a hot room with no airflow. Thanks for the interest.
What catalyst drivers and SDK? When I get one to 99% (XFX) and plug the monitor elsewhere I get 304 MHash/s out of it, but how do I inspire the other one to perform. Right now it (the sapphire, 84%) is driving the video and still not totally in use. I'd believe unit variation if the clocks weren't the same and the activity was stuck low.
I will check my 6870 settings and update this post.
But if i remember well i 'm getting 285mh/s with full load (cgminer) and stock clocks.
But if i remember well i 'm getting 285mh/s with full load (cgminer) and stock clocks.
My basic setup, when everything arrives would be a:
MSI 990FXA-GD65 with Sempron 145 and 1GB of RAM
6x Radeon 6870 cards with powered risers (4 cards and the powered risers en route)
old hard drive
OCZ 1250w PSU.
Windows 7x64.
I currently am runing 2 of the 6870s with unpowered risers and a 5380. All stats from cgminer which is all that works after my last driver fit makes bfgminer give hardware errors always.
5830 has 250 MH, 75C temp with autofan, 97% activity, 800mhz clock (OC a little and display driver crashes), 300mhz mem clock (from 1000mhz) and works within spec. But I'm getting rid of that one...
XFX 6870 gives 275 MH, 75C temp on auto, 96% activity, 1000mhz OC clock, 900 lowest mem clock (cant figure how to lower it), 1.175v and seems slow... and one fan is wobbly
Sapphire 6870 gives 250 MH, 73C temp on auto, 84% activity, 1000mhz OC engine, 900mhz mem as low as it can go, 1.175v. Super slow.
473W total says my Kill-A-Watt. 10-42% CPU usage, 57% ram used.
Running catalyst 11.2 (I thought... driver only, Catalyst install manager says 12.104) and SDK 2.5 (2.5.684.213). Miners crashed with 11.1 and the latest 13.whatever. Some drivers m. SDK 2.4 and 2.8 seemed to work.
So I after all that background, I'd like to know what recommendation there is for a miner (with stratum support, whatever that is) and a catalyst driver and AMD SDK version that all fits well together with eventually 6x6870s. What flags or settings should I use and why can't I underclock my memory like at all. Why is my activity so low? I want to take this system off my desk and hide it away so something with remote administration would be nice. TightVNC works so far. Side note, I moved the dvi cable (only one in the 3 cards, no dummy plugs but not adverse to the idea) from the XFX to the sapphire and got 33 more MHash/s from the XFX with no loss on the Sapphire.
Or... are my numbers about right and I should stop tweaking and put this thing in the corner?
MSI 990FXA-GD65 with Sempron 145 and 1GB of RAM
6x Radeon 6870 cards with powered risers (4 cards and the powered risers en route)
old hard drive
OCZ 1250w PSU.
Windows 7x64.
I currently am runing 2 of the 6870s with unpowered risers and a 5380. All stats from cgminer which is all that works after my last driver fit makes bfgminer give hardware errors always.
5830 has 250 MH, 75C temp with autofan, 97% activity, 800mhz clock (OC a little and display driver crashes), 300mhz mem clock (from 1000mhz) and works within spec. But I'm getting rid of that one...
XFX 6870 gives 275 MH, 75C temp on auto, 96% activity, 1000mhz OC clock, 900 lowest mem clock (cant figure how to lower it), 1.175v and seems slow... and one fan is wobbly
Sapphire 6870 gives 250 MH, 73C temp on auto, 84% activity, 1000mhz OC engine, 900mhz mem as low as it can go, 1.175v. Super slow.
473W total says my Kill-A-Watt. 10-42% CPU usage, 57% ram used.
Running catalyst 11.2 (I thought... driver only, Catalyst install manager says 12.104) and SDK 2.5 (2.5.684.213). Miners crashed with 11.1 and the latest 13.whatever. Some drivers m. SDK 2.4 and 2.8 seemed to work.
So I after all that background, I'd like to know what recommendation there is for a miner (with stratum support, whatever that is) and a catalyst driver and AMD SDK version that all fits well together with eventually 6x6870s. What flags or settings should I use and why can't I underclock my memory like at all. Why is my activity so low? I want to take this system off my desk and hide it away so something with remote administration would be nice. TightVNC works so far. Side note, I moved the dvi cable (only one in the 3 cards, no dummy plugs but not adverse to the idea) from the XFX to the sapphire and got 33 more MHash/s from the XFX with no loss on the Sapphire.
Or... are my numbers about right and I should stop tweaking and put this thing in the corner?
Jump to: