Personally i use http://eligius.st to test normally. It works good with most locations i have tried from. (Yes different servers depending on location).
The realtime can be wrong. Normally it is not but if you tested it on a few pools and all come up with slower speeds good chance of something being wrong on miner side.
I would see what a few pools say and then look for problems with the unit itself if its just that unit and your others are working from same place.
Topic: ADVICE - Ghash.IO showing poor speed rate ? 1Th Dragon Miner ?? (Read 995 times)
Hi
I had 1Th Dragon miner and the PSU was faulty on it soi purchased a 1300w EVGA Gold PSU to replce it.
My 9 other miners all run at 1Th CONSTANTLY except for this one ??
Could it be because i have used the wrong PCI outlets (has 6)?
If goto the miners address and then into 'Real Time Monitoring' of the machine it is a constantly over 1 Th (over 256Gh per blade) ?
Any ideas what is going on here, difficulty is set to 256k.
Thanks
I had 1Th Dragon miner and the PSU was faulty on it soi purchased a 1300w EVGA Gold PSU to replce it.
My 9 other miners all run at 1Th CONSTANTLY except for this one ??
Could it be because i have used the wrong PCI outlets (has 6)?
If goto the miners address and then into 'Real Time Monitoring' of the machine it is a constantly over 1 Th (over 256Gh per blade) ?
Any ideas what is going on here, difficulty is set to 256k.
Thanks
It's showing 540Gh now !!!!!on Ghash.IO and 1,023,716.81 on the 'real time monitoring. !!!!!!!!!!!!!!!!
stick it over on bitminter for a few hours ghash isnt the best for reporting correct speed. bitminter is much better just to test it out also are you getting alot of stales or rejects from the miner?
Hi
I had 1Th Dragon miner and the PSU was faulty on it soi purchased a 1300w EVGA Gold PSU to replce it.
My 9 other miners all run at 1Th CONSTANTLY except for this one ??
Could it be because i have used the wrong PCI outlets (has 6)?
If goto the miners address and then into 'Real Time Monitoring' of the machine it is a constantly over 1 Th (over 256Gh per blade) ?
Any ideas what is going on here, difficulty is set to 256k.
Thanks
I had 1Th Dragon miner and the PSU was faulty on it soi purchased a 1300w EVGA Gold PSU to replce it.
My 9 other miners all run at 1Th CONSTANTLY except for this one ??
Could it be because i have used the wrong PCI outlets (has 6)?
If goto the miners address and then into 'Real Time Monitoring' of the machine it is a constantly over 1 Th (over 256Gh per blade) ?
Any ideas what is going on here, difficulty is set to 256k.
Thanks
It's showing 540Gh now !!!!!on Ghash.IO and 1,023,716.81 on the 'real time monitoring. !!!!!!!!!!!!!!!!
Hi
I had 1Th Dragon miner and the PSU was faulty on it soi purchased a 1300w EVGA Gold PSU to replce it.
My 9 other miners all run at 1Th CONSTANTLY except for this one ??
Could it be because i have used the wrong PCI outlets (has 6)?
If goto the miners address and then into 'Real Time Monitoring' of the machine it is a constantly over 1 Th (over 256Gh per blade) ?
Any ideas what is going on here, difficulty is set to 256k.
Thanks
I had 1Th Dragon miner and the PSU was faulty on it soi purchased a 1300w EVGA Gold PSU to replce it.
My 9 other miners all run at 1Th CONSTANTLY except for this one ??
Could it be because i have used the wrong PCI outlets (has 6)?
If goto the miners address and then into 'Real Time Monitoring' of the machine it is a constantly over 1 Th (over 256Gh per blade) ?
Any ideas what is going on here, difficulty is set to 256k.
Thanks
Jump to: