Topic: Advice on Avalon Miners (Read 625 times)

Dear all, our Avalon Miners are on a big sale! Please feel free to contact us for a special offer.

[/quote]

i have reached out again to canaan support for a firmware that works. I don't think these miners should be advertised here without some firmware that works maybe braiins can make support for it?
[/quote]
We do apologize for the inconvenience caused We will try our best to support you at any time.

i have reached out again to canaan support for a firmware that works. I don't think these miners should be advertised here without some firmware that works maybe braiins can make support for it?

Hello, please send an Email to [email protected] & CC [email protected] , our after-sales service team will support you accordingly.

Here are some issues we'd like to see at my company.

We have 1166 Pro and 1246 Avalons that just randomly shut off and have to be power cycled to turn back on. Why?

Can we have a list of all the ascset parameters for Avalons?

Is there ever going to be updated firmware for those miners?

The FMS tool is extremely laggy and would be nice to have it fixed to run as well as Whatsminer tool or BTC Tool.

 
[/quote]

They have worse support than bitmain and their firmware breaks machines on purpose why they cant run with 2 boards anyhow?
[/quote]

Hello, our miners are with 3 boards or 2 boards, if one doesn't work, please kindly contact our after-sales team for support.

They have worse support than bitmain and their firmware breaks machines on purpose why they cant run with 2 boards anyhow?

Pity that the original FMS devs told me it was in there - hey
Also fun that the API information that Canaan provides shows it also.

It was a Canaan sales rep.

That's the reason for my comment you quoted.

Thanks for the information, well, there are many scammers on Telegram or SNS platforms, please never trust those who convince you to pay with BTC or USDT. Our online shop team didn't change prices on Jan 15th.
BTW, you can always contact us by Email [email protected] or leaving us a message on our online shop.

Advice for Canaan sales.

Stop running scams.

The BTC price jumped to around $21k on the 14th

On the 15th (at least a day later) I was indirectly given a price for the newer A13 miners.
When we got back to the sales guy, less than 12 hours later (due to sleep times) his reply was:

"That price is for your next order, this order will be X" where X was higher.

Full on scam bait and switch.

Edit: FYI X was around 1000 more per miner

If your software is still using cgminer then per-license the source code MUST be made public. Canaan did that for the A6xx, A7xx, A8xx, and A9xx series. After that they started using FMS for the user interface instead of LuCI. Is FMS also a re-write of the actual miner code as well?

Main question is: Does FMS still contain cgminer code? If it does then it is supposed to be made public.

hmmm... how do you know that our recent miners violate the cgminer license?

Yet those strict audits don't care that you violate the cgminer license in your more recent miners

https://bitcointalksearch.org/topic/m.61503204

Good, there are some in the USA backup for repair service(Texas warehouse), no worries~

I have an extra psu so I should be good.

Power supply for most Avalon miners https://shop.canaan.io/products/powersupply?VariantsId=10050

Hello, how many pieces of PSU do you need?

So I think I blew my a1246 psu

does the a1166 psu work as a drop in.


also where is a firmware link for psu and a1246



I have a spare a1166 psu and I am looking at this link from Newegg which says the a1166 psu works



https://www.newegg.com/p/3GG-000G-00001



but your website link for psu's says nothing about the a1246



https://shop.canaan.io/collections/spare-parts

says a1056 to  a1126


oh never mind found info here

https://shop.canaan.io/products/powersupply?VariantsId=10050

I should have a good psu for repair

One advice I would give Canaan is to be more conservative in your hashrate claims.
All our Canaan machines have about 10% lower hashrate than advertised.

We do apologize for the inconvenience caused, the KYC is done by a third party, and we will try our best to negotiate and make it more user-friendly.

There are a lot of room for customer satisfaction improvement:
I placed and order, passed the KYC, and send my Bitcoin, and you answered me the day later that my bitcoin are coming from a "Risk Address" used for gambling or mixing (things I never did), that being based on the verdict of a central entity, and that you'd like the coin to be freshly coming from a central exchange.
What an irony for a company selling hardware for decentralization and what a disappointment as customer.
Such a scheme which makes your business actually suspicious of money laundering.

Hello, our company is a listed company with strict audits, so we have to filter Bitcoin and ensure legality.

However, someone on my pool bought a miner from them and was rejected due to the 'coins being risky'

So apparently canaan keeps some unknown list of addresses to filter the payments and won't accept all BTC payments.

Clearly canaan's new leadership has some delusion about what Bitcoin is.

I can totally agree on this. People that want a silent miner with a good efficiency often just buy a lot of stick miners. This is complete bullshit, but is the best option if you want quiet powerful miners. Maybe we will see at some point somebody who just puts the mining chips at a board with a better cooling solution, since it is not that difficult. It is the same as in the GPU market, where we see different manufactures use the same chip with different cooling solutions.

You've given me an A741, A851 and an A921 - and a few before that also.
(though when I say 'you' I mean the people that canaan fired last year)

The A741 is easy to adjust due to the 'extra options' and being able to see the source code to adjust the frequency etc.

The A851 has a low power mode (source code is also available)

The A921 I was never able to get it to run in a low power mode nor quiet enough to run at home.
(so it's spent most of it's life living in it's box unused)

All miners you've released since the A10 you hide behind China not giving a crap about Copyright laws and you violate the cgminer license.
So there's no idea what is possible there.

Alas as I mentioned above I pointed that out to them a couple years ago and they rejected it.

Maybe that can change now?

You, and all manufacturers need to make low power - low noise miners.

Home mining is dead due to the noise level and power requirements. Which means hobby miners, tinkerers are forced to either get used miners and pull boards / do other things or do the same but with new miners and waste money since they can't run them at full speed.

But 35T 1000W at the $1000 price point and you would probably sell out. From discussions with a lot of people who are running old miners with 1 or 2 boards would happily buy something newer and more efficient and QUIET with a warranty.

Someone who is dumping $100s of thousands of dollars in his farm is not your target for these.
It's just the small home people.

And with ETH going PoS there are probably a lot of people out there who would get them since they are no longer running their GPU rigs.

-Dave

Hello, thanks for your feedback.
BTW, which model did you have before?

The early Avalon/Canaan miners it was easy to add extra options to adjust the settings.
The miner had a field to do exactly that. Why was it removed?

Alas the new ones seem to have a major problem in this regard.
Even though they are pumping 3.3kW or more through them, they get too cold in sub zero weather and you have to shut them off.
Odd that 3.3kW of heat generated inside it isn't enough to keep a miner warm enough to run

Dear all, welcome to share more ideas with us, your opinions will help us grow up.

We are just at the beginning It takes time to be perfect.

Right now I am talking with a local reseller. He has some used bitmain s19 gear that he will let me use my CC. it is the 95th model that pulls around 3250 watts very much the same as your a1246 87th unit. Price is close  I would prefer to buy new from you and not used from him. But he will let me use a line of credit via my CC . You won't make sit tough to buy from you.

Thanks, we will discuss about this with our team
Any other advice about our Avalon miners or service? We are all ears

This was a nice idea.

My Advice is simple consider cc payments for USA buyers at the USA store.

I have good lines of credit and would not mind getting some usa stock with a credit card.

I have 1 card with 15 months to pay and zero interest for that time. It pays me back 2% on the purchase.

If I used the card at your USA store I could get

some of these

https://shop.canaan.io/products/canaan-avalon-miner-a1246-87t?VariantsId=10002

You have my kyc

I did 30 or 40k in group buys for your company.  

And you make it a royal P.I.T.A. to buy gear.

BTW your industry is truly fucked up when it comes to buying gear. not Just you but all the major sellers are like this.

I am really well known and to buy with a credit card is normal in just about every industry there is. Not yours.

Frankly you need to consider how much it holds you back that you do not do this for reputable people. (ie me)

I could upgrade my entire fleet of miners I could get 20 of your a1246 87t models.

Pull my older gear and I am done for the next 6 months. Plus I would have 15 months to pay it off with zero interest.

I would not even mind paying you a cc fee of 3$.

My last major sha 256 gear purchase was in fall of 2019. Bitmain allowed PayPal for 60 days or so. We grabbed 20 s17pros. Did well with them. Since then no major asic company has taken credit cards to buy with. So in 2020 and 2021 I purchased 200 gpus. over 200 thousand dollars no interest and they are paid off.  so sha 256 lost 200000 in sales to me in 2020 and 2021

Dear all
Canaan official online shop has been open for more than half a year, now it's almost the end of the year 2022, so we'd like to collect some advice from all users and fans
We are open to hearing all voices and we will review and share with our team to improve our service in the upcoming new year 2023