Good evening fellow alternates,
So the story goes like this
Got Sapphire RX570 8GB Micron memory
Stock was 24.5MHs
Flashed Bios
after flash got like 1MHs, started overdrive Playing with overdrive trying to get higher MHs, by disabling gpu except p7 and Mem except p2
Said to increase by 50 Mhz(running HWInfo) until i get memory errors then decrease by 25 until working properly.
The "issue" is in the "tutorial" it says the cards work great around 1850 MHz at 900 mv
The bigger issue is i am currently at
Settings in Overdrive
GPU: P7 1150 850
Memory 2050 900
showing 28.7 MHs without memory error in HWInfo or rejected shares, only after every 5 stats in claymore i get a single drop to 20MHs ad then it goes back to 28
How high CAN i go with mem timings?
So the story goes like this
Got Sapphire RX570 8GB Micron memory
Stock was 24.5MHs
Flashed Bios
after flash got like 1MHs, started overdrive Playing with overdrive trying to get higher MHs, by disabling gpu except p7 and Mem except p2
Said to increase by 50 Mhz(running HWInfo) until i get memory errors then decrease by 25 until working properly.
The "issue" is in the "tutorial" it says the cards work great around 1850 MHz at 900 mv
The bigger issue is i am currently at
Settings in Overdrive
GPU: P7 1150 850
Memory 2050 900
showing 28.7 MHs without memory error in HWInfo or rejected shares, only after every 5 stats in claymore i get a single drop to 20MHs ad then it goes back to 28
How high CAN i go with mem timings?
I believe that this is not a problem with memory timings, but a lowered voltage of the GPU. 850mV is small, try at least 900mV.
Sorry for the late reply, but are you saying that the fact that i have/can to increase mem timings so high is that my gpu voltage is to low?
Does that mean if i increase the voltage i can get the same hashrate with lower mem timings?
