You could also make a dummy plug if you did not want the second monitor on there.
http://www.geeks3d.com/20091230/vga-hack-how-to-make-a-vga-dummy-plug/
They are using 75ohm resistors but you can also use anything between 50-150ohms.
Topic: AMD vision engine control centre only recognising one 6990 out of three (Read 1384 times)
June 29, 2011, 05:27:10 AM
June 28, 2011, 06:02:10 PM
Someone please correct me if I am wrong...
I think what is happening is that Win7 can only see a max of four GPUs. You will have to move to Linux which can see up to eight. I think that you are having the same problem that I am in that the mining software is only using one GPU from two of your three cards. I just posted a few minutes ago and I have only one 6990 in a Win7 install but can only see one GPU for mining purposes. If you open AMD Overdrive how many GPUs do you see? I can see both of mine there but it is poclbm that does not see two for me.
Regardless the max that you will get working under Win7 is four so you have to make the move to Linux or take one card out.
BTW that is a great mobo... I am using it in a rig with four 6870s.
Good luck and if you figure anything out under Win7 please post. I will also let you know if I find an answer to my problem.
I think what is happening is that Win7 can only see a max of four GPUs. You will have to move to Linux which can see up to eight. I think that you are having the same problem that I am in that the mining software is only using one GPU from two of your three cards. I just posted a few minutes ago and I have only one 6990 in a Win7 install but can only see one GPU for mining purposes. If you open AMD Overdrive how many GPUs do you see? I can see both of mine there but it is poclbm that does not see two for me.
Regardless the max that you will get working under Win7 is four so you have to make the move to Linux or take one card out.
BTW that is a great mobo... I am using it in a rig with four 6870s.
Good luck and if you figure anything out under Win7 please post. I will also let you know if I find an answer to my problem.
I had to connect vga / hdmi cable with an active monitor to enable my second gfx card in Windows 7.
June 28, 2011, 11:42:40 AM
Someone please correct me if I am wrong...
I think what is happening is that Win7 can only see a max of four GPUs. You will have to move to Linux which can see up to eight. I think that you are having the same problem that I am in that the mining software is only using one GPU from two of your three cards. I just posted a few minutes ago and I have only one 6990 in a Win7 install but can only see one GPU for mining purposes. If you open AMD Overdrive how many GPUs do you see? I can see both of mine there but it is poclbm that does not see two for me.
Regardless the max that you will get working under Win7 is four so you have to make the move to Linux or take one card out.
BTW that is a great mobo... I am using it in a rig with four 6870s.
Good luck and if you figure anything out under Win7 please post. I will also let you know if I find an answer to my problem.
I think what is happening is that Win7 can only see a max of four GPUs. You will have to move to Linux which can see up to eight. I think that you are having the same problem that I am in that the mining software is only using one GPU from two of your three cards. I just posted a few minutes ago and I have only one 6990 in a Win7 install but can only see one GPU for mining purposes. If you open AMD Overdrive how many GPUs do you see? I can see both of mine there but it is poclbm that does not see two for me.
Regardless the max that you will get working under Win7 is four so you have to make the move to Linux or take one card out.
BTW that is a great mobo... I am using it in a rig with four 6870s.
Good luck and if you figure anything out under Win7 please post. I will also let you know if I find an answer to my problem.
June 28, 2011, 11:34:06 AM
Hi,
I have a 890FXA-GD70 motherboard and three 6990's. This machine is running Windows 7 and is a fresh install.
When I open the AMD vision control centre and go to performance to check the temps it only gives me two GPU's. There should be six! There are six devices coming up in device manager though.
Anybody have any guidance on how to get to the bottom of this? Would really appreciate it - I've been working on this for a while now and still have not got to the bottom of it.
Thanks a mill.
I have a 890FXA-GD70 motherboard and three 6990's. This machine is running Windows 7 and is a fresh install.
When I open the AMD vision control centre and go to performance to check the temps it only gives me two GPU's. There should be six! There are six devices coming up in device manager though.
Anybody have any guidance on how to get to the bottom of this? Would really appreciate it - I've been working on this for a while now and still have not got to the bottom of it.
Thanks a mill.
Jump to: