coin foundry LTC seems down
/
gateway error ...
no payments in long long time ..
(october !!))
thx in advance
Topic: ⚡ [ANN] COINFOUNDRY.ORG - Mining Pool [XMR] [DASH] [ZEC] [ETH/ETC] [ETN] [LTC] (Read 3556 times)
December 22, 2018, 03:32:55 AM
September 24, 2018, 12:12:35 PM
Our Bitcoin Diamond pool is now available as well.
April 12, 2018, 09:15:31 AM
We've added Ravencoin and Pigeoncoin Pools due to popular demand.
March 22, 2018, 07:18:19 AM
Just looked at your config generator for xvg blake2s. There’s no option for AMD GPUs!!! Do you have a grudge against them or are you incompetent?
Of course, the latter.
March 22, 2018, 07:07:20 AM
Just looked at your config generator for xvg blake2s. There’s no option for AMD GPUs!!! Do you have a grudge against them or are you incompetent?
March 17, 2018, 04:03:29 AM
Our Bitcoin Cash pool is now up serving as a reliable alternative to the chinese mining monopoly: https://coinfoundry.org/pool/bch
March 10, 2018, 04:35:28 AM
I am new to mining. After I made the set up last week. As of now I am mining eth with the nanopool. As I have checked the mining pool review on Cryptocompare I found your pool rating higher than all and fee also seems little low.
I am using perfectmine os to monitor and manage the mining rig. Just checked the stratum config from your website and added the pool.
My queries are below,
Still I am sure why my rx 470 cards are not hashing only for this pool?
How to check the dashboard with the eth address I have in your site?
Thanks for your kind attention.
I am using perfectmine os to monitor and manage the mining rig. Just checked the stratum config from your website and added the pool.
My queries are below,
Still I am sure why my rx 470 cards are not hashing only for this pool?
How to check the dashboard with the eth address I have in your site?
Thanks for your kind attention.
Could you send an email with the pool your attempting to mine on and the wallet address you are using to [email protected]? I'm sure we'll get that sorted.
Thanks for the reply. Sure I will send an e-mail today to this given address.
March 09, 2018, 05:51:52 AM
I am new to mining. After I made the set up last week. As of now I am mining eth with the nanopool. As I have checked the mining pool review on Cryptocompare I found your pool rating higher than all and fee also seems little low.
I am using perfectmine os to monitor and manage the mining rig. Just checked the stratum config from your website and added the pool.
My queries are below,
Still I am sure why my rx 470 cards are not hashing only for this pool?
How to check the dashboard with the eth address I have in your site?
Thanks for your kind attention.
I am using perfectmine os to monitor and manage the mining rig. Just checked the stratum config from your website and added the pool.
My queries are below,
Still I am sure why my rx 470 cards are not hashing only for this pool?
How to check the dashboard with the eth address I have in your site?
Thanks for your kind attention.
Could you send an email with the pool your attempting to mine on and the wallet address you are using to [email protected]? I'm sure we'll get that sorted.
March 09, 2018, 04:23:25 AM
I am new to mining. After I made the set up last week. As of now I am mining eth with the nanopool. As I have checked the mining pool review on Cryptocompare I found your pool rating higher than all and fee also seems little low.
I am using perfectmine os to monitor and manage the mining rig. Just checked the stratum config from your website and added the pool.
My queries are below,
Still I am sure why my rx 470 cards are not hashing only for this pool?
How to check the dashboard with the eth address I have in your site?
Thanks for your kind attention.
I am using perfectmine os to monitor and manage the mining rig. Just checked the stratum config from your website and added the pool.
My queries are below,
Still I am sure why my rx 470 cards are not hashing only for this pool?
How to check the dashboard with the eth address I have in your site?
Thanks for your kind attention.
March 09, 2018, 01:56:12 AM
Our US-Eastcoast, US-Westcoast servers are now up. The Tokyo Server has been brought online as well, serving Crypto-miners in Northeast-Asia, Southeast-Asia and Oceania.
February 26, 2018, 02:51:27 AM
There's no wtf. You should read up on how pools work. Pools only pay out when a block is found. There are not many people in the pool, so the finding of blocks is very inconsistent right now. We also have a support forum where questions like yours are much more likely to get noticed earlier than here on BCT.
https://feedback.coinfoundry.org
https://feedback.coinfoundry.org
February 25, 2018, 04:26:52 AM
Been mining ZCL for several days with an average hashrate of 2.6KSol/s, but the balance still shows 0. Like wtf? Also, how on earth do I know, what shares round they're currently cycling or when I can expect to be paid?
February 08, 2018, 07:03:13 AM
Added Bitcoin Private Pool (BTCP) information page in preparation for upcoming hardfork: https://coinfoundry.org/pool/btcp
January 26, 2018, 11:19:07 AM
GoByte pool added per request. Happy Mininig!
January 23, 2018, 03:01:10 PM
January 22, 2018, 05:06:15 AM
Our Dash Mining Pool now supports SSL/TLS connections on port 3063. Happy mining.
January 19, 2018, 03:31:03 AM
Second stratum server added to keep up with the influx.
January 18, 2018, 04:24:13 AM
We've rebranded our pool operation under the umbrella of the coinfoundry.org unit. Please update your miners to point to .coinfoundry.org from now on. Existing miner configurations will continue to work for at least a year.
January 10, 2018, 05:19:19 PM
Pool fees lowered accross the board.
January 06, 2018, 10:42:29 AM
Both our Electroneum Pool and the Monero Pool now support SSL/TLS.
January 03, 2018, 06:00:38 AM
is it possible to lower the payout of dash? 0.1 is high ... 0.01 maybe?
check litecoinpool ...
check litecoinpool ...
The Dash payout has been lowered to 0.03 effective immediately.
December 20, 2017, 08:23:26 AM
I have been mining for about 8 hours and it says my balance is still 0? I thought this was an hourly payout?
https://i.imgur.com/WVWL3jq.png
https://i.imgur.com/WVWL3jq.png
because during the last 8 hours, the pool doesn't find any block ...
December 20, 2017, 08:03:23 AM
is it possible to lower the payout of dash? 0.1 is high ... 0.01 maybe?
check litecoinpool ...
check litecoinpool ...
December 15, 2017, 12:44:54 PM
I have been mining for about 8 hours and it says my balance is still 0? I thought this was an hourly payout?
https://i.imgur.com/WVWL3jq.png
https://i.imgur.com/WVWL3jq.png
December 12, 2017, 02:12:00 AM
things look like they are back operating properly.
December 11, 2017, 09:32:38 AM
You guys having issues? share count is way off and i'm getting connection errors on mona and vtc...
December 11, 2017, 07:58:42 AM
hey ya.
my d3 cant connect it was fine for last 8 hours.
now
0 stratum+tcp://dash.poolmining.org:3062.rig1 Dead
is there another pool backup i should go to?
rebooted all 5 units same thing.
my d3 cant connect it was fine for last 8 hours.
now
0 stratum+tcp://dash.poolmining.org:3062
is there another pool backup i should go to?
rebooted all 5 units same thing.
December 09, 2017, 12:34:50 PM
Why is the Stats reporting so low??
Hashrate 133.1 MH/s
Shares 8520
Been mining for more than 3 days now.
Hashrate 133.1 MH/s
Shares 8520
Been mining for more than 3 days now.
December 07, 2017, 07:09:03 AM
I'm new to mining using ccminer. (Been only using Nice Hash in the past)
I just woke up and checked out the "My Stats" section after leaving the process running overnight. Currently, it is reporting at 166.9 MH/s. I have 7 x 1080 Ti's running, each doing about 60 MH/s according to the consoles. 6753 shares. 0.115 MONA balance. Paid out 0 MONA.
How should I interpret this? I was expecting MUCH higher hashrate and MUCH higher balance...
Thank you.
I just woke up and checked out the "My Stats" section after leaving the process running overnight. Currently, it is reporting at 166.9 MH/s. I have 7 x 1080 Ti's running, each doing about 60 MH/s according to the consoles. 6753 shares. 0.115 MONA balance. Paid out 0 MONA.
How should I interpret this? I was expecting MUCH higher hashrate and MUCH higher balance...
Thank you.
December 04, 2017, 10:16:26 AM
Due to popular demand we've added an AEON Pool - https://poolmining.org/pool/aeon
December 02, 2017, 03:28:23 AM
Reaching out to Monacoin/Vertcoin Miners looking for profitable pool.
Hi,I've a few questions - I'm finding pool for MonaCoin (actually using Suprnova, but there are problems with mining).
a) So, can I use more rigs with one wallet address or must have worker suffix?
b) I using official MonaCoin Core wallet - there gets wallet address. Is it correct?
c) Are there some monitoring for miners where I can check hash rate, earned coins etc?
My config:
Code:
{
"max-log-rate" : 30,
"quiet" : false,
"debug" : false,
"protocol" : false,
"cpu-priority" : 3,
"algo" : "lyra2v2",
"url" : "stratum+tcp://mona.poolmining.org:3093",
"user" : "MY_WALLET_ADDRESS",
"pass" : "d=8"
}Thanks for advice,
hurvajs
More detailed status pages for miners are being worked on. For now the most important stats are always available at the "My Stats" section of the pool page. Just enter your wallet address and you're fine.
November 27, 2017, 02:39:14 PM
Reaching out to Monacoin/Vertcoin Miners looking for profitable pool.
Hi,I've a few questions - I'm finding pool for MonaCoin (actually using Suprnova, but there are problems with mining).
a) So, can I use more rigs with one wallet address or must have worker suffix?
b) I using official MonaCoin Core wallet - there gets wallet address. Is it correct?
c) Are there some monitoring for miners where I can check hash rate, earned coins etc?
My config:
Code:
{
"max-log-rate" : 30,
"quiet" : false,
"debug" : false,
"protocol" : false,
"cpu-priority" : 3,
"algo" : "lyra2v2",
"url" : "stratum+tcp://mona.poolmining.org:3093",
"user" : "MY_WALLET_ADDRESS",
"pass" : "d=8"
}Thanks for advice,
hurvajs
November 26, 2017, 04:50:58 AM
Happy Thanksgiving to everyone and thanks for your support!
November 24, 2017, 05:02:16 PM
Hi
I'd like to introduce our Mining-Pool at https://poolmining.org
Summary
hello, i'm going to mine Dash soon, and my hosting is located in Malaisia. Is it ok to mine with you, as you are quite far from Malaisia? I'd like to introduce our Mining-Pool at https://poolmining.org
Summary
- Runs on dedicated hardware (Dual Hex-Core Xeons, 128 GB Ram)
- Hosted at German Datacenter (Failover capacity on stand-by at Amazon AWS)
Is distance of any importance, in fact?
We have quite a beefy peering to asia through our upstream provider so I don't see much of a problem for that.
November 24, 2017, 12:03:18 PM
Reaching out to Monacoin/Vertcoin Miners looking for profitable pool.
November 18, 2017, 10:39:28 AM
An influx of new miners due to the rising popularity of the currency has drastically reduced block times of our Dash Pool. Thanks for your ongoing trust and support!
November 15, 2017, 12:53:40 PM
Welcoming ZCash to our family of pools.
November 13, 2017, 06:04:18 AM
Our Bitcoin Gold Pool is now open for business at https://poolmining.org/pool/btg.
October 24, 2017, 04:00:46 AM
Our Vertcoin Pool is now up along with the rest of our pool family. Happy mining and welcome aboard!
October 24, 2017, 03:59:31 AM
Hi
I'd like to introduce our Mining-Pool at https://poolmining.org
Summary
hello, i'm going to mine Dash soon, and my hosting is located in Malaisia. Is it ok to mine with you, as you are quite far from Malaisia? I'd like to introduce our Mining-Pool at https://poolmining.org
Summary
- Runs on dedicated hardware (Dual Hex-Core Xeons, 128 GB Ram)
- Hosted at German Datacenter (Failover capacity on stand-by at Amazon AWS)
Is distance of any importance, in fact?
Distance is of some importance that's true. You should simply test out if you get any rejects with our pool and if you don't (which is what I assume), then you're fine. Welcome aboard!
October 23, 2017, 04:43:54 PM
Hi
I'd like to introduce our Mining-Pool at https://poolmining.org
Summary
hello, i'm going to mine Dash soon, and my hosting is located in Malaisia. Is it ok to mine with you, as you are quite far from Malaisia? I'd like to introduce our Mining-Pool at https://poolmining.org
Summary
- Runs on dedicated hardware (Dual Hex-Core Xeons, 128 GB Ram)
- Hosted at German Datacenter (Failover capacity on stand-by at Amazon AWS)
Is distance of any importance, in fact?
October 19, 2017, 05:42:03 AM
Due to the rising popularity of the currency and the relative scarcity of international pools for this coin, we've just added a Monacoin Pool to our family of pools: https://poolmining.org/pool/mona
October 18, 2017, 05:39:09 AM
We are hard at work to have a BTG pool up and running on launch day at https://poolmining.org. Please check back on launch day - assuming the BTG developers are able to hit their deadline of 25th October.
October 15, 2017, 01:19:36 AM
Dedicated Pools for Ethereum (ETH), Ethereum Classic (ETC) and Expanse (EXP) have been added to the cluster. Looking forward to see you on the pool.
October 09, 2017, 05:48:22 AM
NiceHash boost incoming for our Monero Pool. Coins earned by boost account will be distributed to our miners.
October 09, 2017, 02:23:45 AM
what is profit fee for the miners?
Profit fee? Do you mean the pool fee?
October 05, 2017, 09:31:33 AM
what is profit fee for the miners?
October 05, 2017, 08:35:31 AM
Due to the low number of shares contributing to our first DASH Block, our top miners will receive a bonus of 0.1 Dash each. Thanks for your support. You rock!
October 04, 2017, 04:49:01 AM
We did an extra payout round on sunday to ease the waiting time for our miners: https://twitter.com/coinfoundryorg/status/914540169289699328
September 30, 2017, 02:28:23 AM
DNS issues have been resolved and we switched to a more reliable DNS provider.
September 28, 2017, 02:05:28 AM
hi i can see you using this code https://github.com/coinfoundry/miningcore but problem is they don't provide user ui file the website file ..do you suggest any to use this code and ui also or we have to develop our own user ui code / website
also this muitlcoin pool . i mean do all code and demon will be install in this same server or we have to each coin in separate vps and then link the api to website ui ?? i am not getting it
also this muitlcoin pool . i mean do all code and demon will be install in this same server or we have to each coin in separate vps and then link the api to website ui ?? i am not getting it
I've answered on Github.
September 27, 2017, 11:16:16 PM
hi i can see you using this code https://github.com/coinfoundry/miningcore but problem is they don't provide user ui file the website file ..do you suggest any to use this code and ui also or we have to develop our own user ui code / website
also this muitlcoin pool . i mean do all code and demon will be install in this same server or we have to each coin in separate vps and then link the api to website ui ?? i am not getting it
also this muitlcoin pool . i mean do all code and demon will be install in this same server or we have to each coin in separate vps and then link the api to website ui ?? i am not getting it
September 27, 2017, 12:44:35 PM
We did an extra payout round on the Monero pool to reward the loyal miners staying with the pool till the first block. You rock! 
September 24, 2017, 01:16:51 AM
Nice to see that you put some work into your pool.
However there are a few rough edges for me i want to elaborate:
Minimum payout of 0.5 dash is kind of a show-stopper for me.
Being able to customize it makes sense but even a D3 needs 3 full days until payout.
If there is one in 3 days, becasue your hashrate is low right now.
However there are a few rough edges for me i want to elaborate:
Minimum payout of 0.5 dash is kind of a show-stopper for me.
Being able to customize it makes sense but even a D3 needs 3 full days until payout.
If there is one in 3 days, becasue your hashrate is low right now.
You've got some valid points there. Payout limit has been adjusted and payout limit customization is in the works. Thanks for your constructive feedback!
September 23, 2017, 03:52:38 PM
Nice to see that you put some work into your pool.
However there are a few rough edges for me i want to elaborate:
Minimum payout of 0.5 dash is kind of a show-stopper for me.
Being able to customize it makes sense but even a D3 needs 3 full days until payout.
If there is one in 3 days, becasue your hashrate is low right now.
However there are a few rough edges for me i want to elaborate:
Minimum payout of 0.5 dash is kind of a show-stopper for me.
Being able to customize it makes sense but even a D3 needs 3 full days until payout.
If there is one in 3 days, becasue your hashrate is low right now.
September 23, 2017, 02:50:23 AM
Pool Web-Frontend updated with some requested features such as per-worker hashrate stats.
how this can be seen i don't find any option to see this per worker or per rig status
also with the last block found and payment done tx are not showing in stare ant where
September 22, 2017, 02:53:50 PM
Pool Web-Frontend updated with some requested features such as per-worker hashrate stats.
September 20, 2017, 01:15:32 AM
There will be a short website maintenance today at 13:00 GMT. Pool operation should be unaffected by this.
September 14, 2017, 01:37:39 PM
Miners contributing to the next block will receive a Bonus from the Pool's wallet.
September 13, 2017, 06:17:44 AM
Hi
I'd like to introduce our Mining-Pool at https://coinfoundry.org
What differentiates us from most other pools, is our quickly responding an friendly support, our active community and perhaps a fresh and less generic approach to UX. We hope that our near flawless reliability track record combined with lower than average fees might convice you to give us a try. We'd be glad to welcome you aboard!
Summary
If you have questions or suggestions, feel free to drop me a line here or on Twitter or join the pool's Support-Channel.
I'd like to introduce our Mining-Pool at https://coinfoundry.org
What differentiates us from most other pools, is our quickly responding an friendly support, our active community and perhaps a fresh and less generic approach to UX. We hope that our near flawless reliability track record combined with lower than average fees might convice you to give us a try. We'd be glad to welcome you aboard!
Summary
- Running on dedicated servers with multi-Gigabit peerings
- Run by experienced staff with years of experience managing complex systems
- In-house developers maintaining and improving pool code
- Coins: Monero, Electroneum, Ethereum, Ethereum Classic, Bitcoin Private, Litecon, DASH, ZCash, Verge - Blake, Monacoin, Vertcoin, Electroneum
- Pool Fee: 0.1% (introductory offer)
- Payout System: PPLNS
- Payouts: Hourly
- Newbie friendly support on UserEcho and Twitter
If you have questions or suggestions, feel free to drop me a line here or on Twitter or join the pool's Support-Channel.
Jump to: