pragma solidity ^0.4.25;
/**
Multiplier contract: returns 111%-141% of each investment!
Automatic payouts!
No bugs, no backdoors, NO OWNER - fully automatic!
Made and checked by professionals!
1. Send any sum to smart contract address
- sum from 0.01 to 10 ETH
- min 250000 gas limit
- you are added to a queue
2. Wait a little bit
3. ...
4. PROFIT! You have got 111-141%
How is that?
1. The first investor in the queue (you will become the
first in some time) receives next investments until
it become 111-141% of his initial investment.
2. You will receive payments in several parts or all at once
3. Once you receive 111-141% of your initial investment you are
removed from the queue.
4. You can make multiple deposits
5. The balance of this contract should normally be 0 because
all the money are immediately go to payouts
6. The more deposits you make the more multiplier you get. See MULTIPLIERS var
7. If you are the last depositor (no deposits after you in 20 mins)
you get 2% of all the ether that were on the contract. Send 0 to withdraw it.
Do it BEFORE NEXT RESTART!
8. The contract automatically restarts each 24 hours at 17:00 GMT
9. Deposits will not be accepted 20 mins before next restart. But prize can be withdrawn.
So the last pays to the first (or to several first ones
if the deposit big enough) and the investors paid 111-141% are removed from the queue
new investor --| brand new investor --|
investor5 | new investor |
investor4 | =======> investor5 |
investor3 | investor4 |
(part. paid) investor2 <| investor3 |
(fully paid) investor1 <-| investor2 <----| (pay until full %)
Кoнтpaкт Умнoжитeль: вoзвpaщaeт 111%-141% oт вaшeгo дeпoзитa!
Aвтoмaтичecкиe выплaты!
Бeз oшибoк, дыp, aвтoмaтичecкий - для выплaт HE HУЖHA aдминиcтpaция!
Coздaн и пpoвepeн пpoфeccиoнaлaми!
1. Пoшлитe любyю нeнyлeвyю cyммy нa aдpec кoнтpaктa
- cyммa oт 0.01 дo 10 ETH
- gas limit минимyм 250000
- вы вcтaнeтe в oчepeдь
2. Heмнoгo пoдoждитe
3. ...
4. PROFIT! Baм пpишлo 111%-141% oт вaшeгo дeпoзитa.
Кaк этo вoзмoжнo?
1. Пepвый инвecтop в oчepeди (вы cтaнeтe пepвым oчeнь cкopo) пoлyчaeт выплaты oт
нoвыx инвecтopoв дo тex пop, пoкa нe пoлyчит 111%-141% oт cвoeгo дeпoзитa
2. Bыплaты мoгyт пpиxoдить нecкoлькими чacтями или вce cpaзy
3. Кaк тoлькo вы пoлyчaeтe 111%-141% oт вaшeгo дeпoзитa, вы yдaляeтecь из oчepeди
4. Bы мoжeтe дeлaть нecкoлькo дeпoзитoв cpaзy
5. Бaлaнc этoгo кoнтpaктa дoлжeн oбычнo быть в paйoнe 0, пoтoмy чтo вce пocтyплeния
cpaзy жe нaпpaвляютcя нa выплaты
6. Чeм бoльшe вы cдeлaли дeпoзитoв, тeм бoльший пpoцeнт вы пoлyчaeтe нa oчepeднoй дeпoзит
Cмoтpитe пepeмeннyю MULTIPLIERS в кoнтpaктe
7. Ecли вы пocлeдний вклaдчик (пocлe вac нe cдeлaн дeпoзит в тeчeниe 20 минyт), тo вы мoжeтe
зaбpaть пpизoвoй фoнд - 2% oт эфиpa, пpoшeдшeгo чepeз кoнтpaкт. Пoшлитe 0 нa кoнтpaкт
c гaзoм нe мeнee 350000, чтoбы eгo пoлyчить.
8. Кoнтpaкт aвтoмaтичecки cтapтyeт кaждыe cyтки в 20:00 MSK
9. Зa 20 минyт дo pecтapтa дeпoзиты пepecтaют пpинимaтьcя. Ho пpиз зaбpaть мoжнo.
Taким oбpaзoм, пocлeдниe плaтят пepвым, и инвecтopы, дocтигшиe выплaт 111%-141% oт дeпoзитa,
yдaляютcя из oчepeди, ycтyпaя мecтo ocтaльным
нoвый инвecтop --| coвceм нoвый инвecтop --|
инвecтop5 | нoвый инвecтop |
инвecтop4 | =======> инвecтop5 |
инвecтop3 | инвecтop4 |
(чacт. выплaтa) инвecтop2 <| инвecтop3 |
(пoлнaя выплaтa) инвecтop1 <-| инвecтop2 <----| (дoплaтa дo 111%-141%)
*/
contract Multipliers {
//Address of old Multiplier
address constant private FATHER = 0x7CDfA222f37f5C4CCe49b3bBFC415E8C911D1cD8;
//Address for tech expences
address constant private TECH = 0xDb058D036768Cfa9a94963f99161e3c94aD6f5dA;
//Address for promo expences
address constant private PROMO = 0xdA149b17C154e964456553C749B7B4998c152c9E;
//Percent for first multiplier donation
uint constant public FATHER_PERCENT = 1;
uint constant public TECH_PERCENT = 2;
uint constant public PROMO_PERCENT = 2;
uint constant public PRIZE_PERCENT = 2;
uint constant public MAX_INVESTMENT = 10 ether;
uint constant public MIN_INVESTMENT_FOR_PRIZE = 0.05 ether;
uint constant public MAX_IDLE_TIME = 20 minutes; //Maximum time the deposit should remain the last to receive prize
//How many percent for your deposit to be multiplied
//Depends on number of deposits from specified address at this stage
//The more deposits the higher the multiplier
uint8[] MULTIPLIERS = [
111, //For first deposit made at this stage
113, //For second
117, //For third
121, //For forth
125, //For fifth
130, //For sixth
135, //For seventh
141 //For eighth and on
];
//The deposit structure holds all the info about the deposit made
struct Deposit {
address depositor; //The depositor address
uint128 deposit; //The deposit amount
uint128 expect; //How much we should pay out (initially it is 111%-141% of deposit)
}
struct DepositCount {
int128 stage;
uint128 count;
}
struct LastDepositInfo {
uint128 index;
uint128 time;
}
Deposit[] private queue; //The queue
uint public currentReceiverIndex = 0; //The index of the first depositor in the queue. The receiver of investments!
uint public currentQueueSize = 0; //The current size of queue (may be less than queue.length)
LastDepositInfo public lastDepositInfo; //The time last deposit made at
uint public prizeAmount = 0; //Prize amount accumulated for the last depositor
int public stage = 0; //Number of contract runs
mapping(address => DepositCount) public depositsMade; //The number of deposits of different depositors
//This function receives all the deposits
//stores them and make immediate payouts
function () public payable {
//If money are from first multiplier, just add them to the balance
//All these money will be distributed to current investors
if(msg.value > 0 && msg.sender != FATHER){
require(gasleft() >= 220000, "We require more gas!"); //We need gas to process queue
require(msg.value <= MAX_INVESTMENT, "The investment is too much!"); //Do not allow too big investments to stabilize payouts
checkAndUpdateStage();
//No new deposits 20 minutes before next restart, you should withdraw the prize
require(getStageStartTime(stage+1) >= now + MAX_IDLE_TIME);
addDeposit(msg.sender, msg.value);
//Pay to first investors in line
pay();
}else if(msg.value == 0){
withdrawPrize();
}
}
//Used to pay to current investors
//Each new transaction processes 1 - 4+ investors in the head of queue
//depending on balance and gas left
function pay() private {
//Try to send all the money on contract to the first investors in line
uint balance = address(this).balance;
uint128 money = 0;
if(balance > prizeAmount) //The opposite is impossible, however the check will not do any harm
money = uint128(balance - prizeAmount);
//We will do cycle on the queue
for(uint i=currentReceiverIndex; i
Deposit storage dep = queue[i]; //get the info of the first investor
if(money >= dep.expect){ //If we have enough money on the contract to fully pay to investor
dep.depositor.send(dep.expect); //Send money to him
money -= dep.expect; //update money left
//this investor is fully paid, so remove him
delete queue[i];
}else{
//Here we don't have enough money so partially pay to investor
dep.depositor.send(money); //Send to him everything we have
dep.expect -= money; //Update the expected amount
break; //Exit cycle
}
if(gasleft() <= 50000) //Check the gas left. If it is low, exit the cycle
break; //The next investor will process the line further
}
currentReceiverIndex = i; //Update the index of the current first investor
}
function addDeposit(address depositor, uint value) private {
//Count the number of the deposit at this stage
DepositCount storage c = depositsMade[depositor];
if(c.stage != stage){
c.stage = int128(stage);
c.count = 0;
}
//If you are applying for the prize you should invest more than minimal amount
//Otherwize it doesn't count
if(value >= MIN_INVESTMENT_FOR_PRIZE)
lastDepositInfo = LastDepositInfo(uint128(currentQueueSize), uint128(now));
//Compute the multiplier percent for this depositor
uint multiplier = getDepositorMultiplier(depositor);
//Add the investor into the queue. Mark that he expects to receive 111%-141% of deposit back
push(depositor, value, value*multiplier/100);
//Increment number of deposits the depositors made this round
c.count++;
//Save money for prize and father multiplier
prizeAmount += value*(FATHER_PERCENT + PRIZE_PERCENT)/100;
//Send small part to tech support
uint support = value*TECH_PERCENT/100;
TECH.send(support);
uint adv = value*PROMO_PERCENT/100;
PROMO.send(adv);
}
function checkAndUpdateStage() private{
int _stage = getCurrentStageByTime();
require(_stage >= stage, "We should only go forward in time");
if(_stage != stage){
proceedToNewStage(_stage);
}
}
function proceedToNewStage(int _stage) private {
//Clean queue info
//The prize amount on the balance is left the same if not withdrawn
stage = _stage;
currentQueueSize = 0; //Instead of deleting queue just reset its length (gas economy)
currentReceiverIndex = 0;
delete lastDepositInfo;
}
function withdrawPrize() private {
//You can withdraw prize only if the last deposit was more than MAX_IDLE_TIME ago
require(lastDepositInfo.time > 0 && lastDepositInfo.time <= now - MAX_IDLE_TIME, "The last depositor is not confirmed yet");
//Last depositor will receive prize only if it has not been fully paid
require(currentReceiverIndex <= lastDepositInfo.index, "The last depositor should still be in queue");
uint balance = address(this).balance;
if(prizeAmount > balance) //Impossible but better check it
prizeAmount = balance;
//Send donation to the first multiplier for it to spin faster
//It already contains all the sum, so we must split for father and last depositor only
uint donation = prizeAmount*FATHER_PERCENT/(FATHER_PERCENT + PRIZE_PERCENT);
if(donation > 10 ether) //The father contract accepts up to 10 ether
donation = 10 ether;
//If the .call fails then ether will just stay on the contract to be distributed to
//the queue at the next stage
require(gasleft() >= 300000, "We need gas for the father contract");
FATHER.call.value(donation).gas(250000)();
uint prize = prizeAmount - donation;
queue[lastDepositInfo.index].depositor.send(prize);
prizeAmount = 0;
proceedToNewStage(stage + 1);
}
//Pushes investor to the queue
function push(address depositor, uint deposit, uint expect) private {
//Add the investor into the queue
Deposit memory dep = Deposit(depositor, uint128(deposit), uint128(expect));
assert(currentQueueSize <= queue.length); //Assert queue size is not corrupted
if(queue.length == currentQueueSize)
queue.push(dep);
else
queue[currentQueueSize] = dep;
currentQueueSize++;
}
//Get the deposit info by its index
//You can get deposit index from
function getDeposit(uint idx) public view returns (address depositor, uint deposit, uint expect){
Deposit storage dep = queue[idx];
return (dep.depositor, dep.deposit, dep.expect);
}
//Get the count of deposits of specific investor
function getDepositsCount(address depositor) public view returns (uint) {
uint c = 0;
for(uint i=currentReceiverIndex; i if(queue[i].depositor == depositor)
c++;
}
return c;
}
//Get all deposits (index, deposit, expect) of a specific investor
function getDeposits(address depositor) public view returns (uint[] idxs, uint128[] deposits, uint128[] expects) {
uint c = getDepositsCount(depositor);
idxs = new uint[](c);
deposits = new uint128[](c);
expects = new uint128[](c);
if(c > 0) {
uint j = 0;
for(uint i=currentReceiverIndex; i Deposit storage dep = queue[i];
if(dep.depositor == depositor){
idxs[j] = i;
deposits[j] = dep.deposit;
expects[j] = dep.expect;
j++;
}
}
}
}
//Get current queue size
function getQueueLength() public view returns (uint) {
return currentQueueSize - currentReceiverIndex;
}
//Get current depositors multiplier percent at this stage
function getDepositorMultiplier(address depositor) public view returns (uint) {
DepositCount storage c = depositsMade[depositor];
uint count = 0;
if(c.stage == getCurrentStageByTime())
count = c.count;
if(count < MULTIPLIERS.length)
return MULTIPLIERS[count];
return MULTIPLIERS[MULTIPLIERS.length - 1];
}
function getCurrentStageByTime() public view returns (int) {
return int(now - 17 hours) / 1 days - 17837; //Start is 02/11/2018 20:00 GMT+3
}
function getStageStartTime(int _stage) public pure returns (uint) {
return 17 hours + uint(_stage + 17837)*1 days;
}
function getCurrentCandidateForPrize() public view returns (address addr, int timeLeft){
//prevent exception, just return 0 for absent candidate
if(currentReceiverIndex <= lastDepositInfo.index && lastDepositInfo.index < currentQueueSize){
Deposit storage d = queue[lastDepositInfo.index];
addr = d.depositor;
timeLeft = int(lastDepositInfo.time + MAX_IDLE_TIME) - int(now);
}
}
}