Topic: [ANN] NEW USB MINER - 11-15 Gh/s NANO FURY 6 USB MINER, **$99.99** (Read 5215 times)
You're welcome Mike! Happy mining!
July 28, 2014, 09:09:51 PM
Decided to be a pig and just ordered the other! 
Thanks again!
Thanks again!
Got it. Sent you an email to verify. They will ship tomorrow Priority Mail.
Thanks!
Mike
July 28, 2014, 08:08:48 PM
Decided to be a pig and just ordered the other!
Thanks again!
Thanks again!
July 28, 2014, 07:16:39 PM
Thanks, thanks, thanks!
I just placed my order for one of the two, much appreciate you extending the opportunity!
I just placed my order for one of the two, much appreciate you extending the opportunity!
July 28, 2014, 06:25:24 PM
Hi Trevor -
We are almost out of stock, but I opened up two more July Specials for purchase. These will be the last ones and then we'll be sold out.
We are almost out of stock, but I opened up two more July Specials for purchase. These will be the last ones and then we'll be sold out.
July 28, 2014, 05:57:47 PM
Just added the July special. Three NF6 miners for $255. See the website for details.
moonlightminer.com
Aww, disappointed! Just got started BTC mining a week ago w/ my GPU, have ordered a few used Antminer U2s, and just now ran across the NF6 and here it is still July and the 3 for $255 is over -- bummer moonlightminer.com
JULY SPECIAL - 3x NF6 for $255
! 
July 13, 2014, 09:10:37 AM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
sounds goods
I did the s I did the w here is a screen shot my skill at writing is all cut and paste. I do not know how to write the file.
I would need a screen shot of one written so I could copy it and add in my solo btc info.
http://imagizer.imageshack.us/v2/1280x1024q90/840/v0x.png
Dude - you were right there - all you had to do was hit ENTER! :-)
Or enter a new file name and then hit ENTER.
I must have written in ten thousand words on set ups of bfgminer in the last 10 months.
Well I finally learned thanks.
A question about the 6 chip unit what is the lowest power watt per gh you got .
set at 45 or 40 freq and tweaking the volts with a different resistor.
these units could be sold as a long term lottery ticket mined at bitsolo.net
silent and cool at 40 freq if you could do lower watts per gh .
get one of these with a bfgminer 4.4.0 program on a usb stick for the programmed challenged.
did you assemble these your self?
I would love to have one capped at 10 or 9 gh but lower power use due to a different resistor.
And have the standard one for comparison.
July 13, 2014, 08:03:46 AM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
sounds goods
I did the s I did the w here is a screen shot my skill at writing is all cut and paste. I do not know how to write the file.
I would need a screen shot of one written so I could copy it and add in my solo btc info.
http://imagizer.imageshack.us/v2/1280x1024q90/840/v0x.png
Dude - you were right there - all you had to do was hit ENTER! :-)
Or enter a new file name and then hit ENTER.
July 13, 2014, 07:03:19 AM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
sounds goods
I did the s I did the w here is a screen shot my skill at writing is all cut and paste. I do not know how to write the file.
I would need a screen shot of one written so I could copy it and add in my solo btc info.
July 12, 2014, 10:02:40 PM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
July 12, 2014, 08:39:43 PM
I am still running your bi fury or fury II sticks. I just wish these had come out sooner rather then this late in the game.
I was look to run these at bitsolo.net
I run your fury II sticks at 49 freq pretty cool. I use bfgminer 4.4.0
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I am typing in my entire btc address each time I restart it. a pain in the ass.
I would like to just click on the start.bat file
I was look to run these at bitsolo.net
I run your fury II sticks at 49 freq pretty cool. I use bfgminer 4.4.0
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I am typing in my entire btc address each time I restart it. a pain in the ass.
I would like to just click on the start.bat file
July 07, 2014, 02:14:29 PM
Have you taken any heat measurements with multiple in the same hub? The heat spreaders look like they may help, but the old ones got insanely hot and with a 10X speed increase I wonder how hot these are in a group.
I can take some measurements for you tomorrow. I have a 10 port hub with 5 NF6's running slightly overclocked. There is a USB fan on them and the surface temperature of the miners is 41C. Without the fan they would be about 72C-82C.
Because of their deepth you would not be able to fit more than 5 on a standard 10 port hub. If your hub ports are tightly packed you may not even fit 5.
I have 49 port hub on which I have run a maximum of 18 NF6's. The limitation there was more my PC than the hub itself.
July 06, 2014, 01:10:47 PM
Please give link to schematic NF6.
Schematic will not be released while current batch remains on sale. July 06, 2014, 01:09:28 PM
Have you taken any heat measurements with multiple in the same hub? The heat spreaders look like they may help, but the old ones got insanely hot and with a 10X speed increase I wonder how hot these are in a group.
I can take some measurements for you tomorrow. July 06, 2014, 12:38:04 PM
Have you taken any heat measurements with multiple in the same hub? The heat spreaders look like they may help, but the old ones got insanely hot and with a 10X speed increase I wonder how hot these are in a group.
July 06, 2014, 11:59:23 AM
Please give link to schematic NF6.
You'd have to ask here: https://bitcointalksearch.org/topic/nanofury-project-open-source-design-321287As I recall - but I can't find the post - it will only be open sourced once distributors who commissioned / licensed the design have been made whole. But if you have one in hand, reverse engineering a schematic from that shouldn't be too difficult. )
July 06, 2014, 11:38:10 AM
Please give link to schematic NF6.
June 30, 2014, 01:44:18 AM
thanks I was trying to figure if I could get better then 1 watt a gh on an underclock. so it looks like they don't save a lot of power on the lower clocks.
That's an interesting challenge ... I guess I can experiment a bit more in the next few days and find out
June 29, 2014, 08:26:52 PM
1) how much power does one use if I clock it at freq 40?
2) how much will it hash at freq 40?
2) how much will it hash at freq 40?
Those that at 54-56 bits do 12-16GH now at speed 40 do 6.9-8.2GH.
I'll have to separately set up the rig to measure the current consumption but I'd guesstimate it to be in the 0.7-0.9A.
3) will it use bfg 3.99 like the 2 chip ones you sold me?
You can most likely use the same version, but I would recommend upgrading to 4.0.0 as there were a few bugfixes and tweaks in between.
thanks I was trying to figure if I could get better then 1 watt a gh on an underclock. so it looks like they don't save a lot of power on the lower clocks.
I asked because I run a few 2x fury sticks at bitsolo.net
June 29, 2014, 08:19:06 PM
1) how much power does one use if I clock it at freq 40?
2) how much will it hash at freq 40?
2) how much will it hash at freq 40?
Those that at 54-56 bits do 12-16GH now at speed 40 do 6.9-8.2GH.
I'll have to separately set up the rig to measure the current consumption but I'd guesstimate it to be in the 0.7-0.9A.
3) will it use bfg 3.99 like the 2 chip ones you sold me?
You can most likely use the same version, but I would recommend upgrading to 4.0.0 as there were a few bugfixes and tweaks in between.
June 29, 2014, 02:47:33 PM
2 questions.
1) how much power does one use if I clock it at freq 40?
2) how much will it hash at freq 40?
3) will it use bfg 3.99 like the 2 chip ones you sold me?
you can send me a pm if you do not want to answer here.
I think I will order 1 from you just so that I have 1.
1) how much power does one use if I clock it at freq 40?
2) how much will it hash at freq 40?
3) will it use bfg 3.99 like the 2 chip ones you sold me?
you can send me a pm if you do not want to answer here.
I think I will order 1 from you just so that I have 1.
June 29, 2014, 02:40:42 PM
Just added the July special. Three NF6 miners for $255. See the website for details.
moonlightminer.com
moonlightminer.com
JULY SPECIAL - 3x NF6 for $255
June 26, 2014, 07:04:22 PM
As others have eluded to - this miner is for:
-brand new folks testing the water,
-enthusiasts who have collected many if not all USB miners ever made,
-wanna be EE's (and real ones) who like to tinker,
-bitcoin fans who want to mine at work in their cubicle,
-berated husbands whose wife will leave them if they bring another f%&k*! HOT and LOUD machine in the house.
-insert your reason here.
This is not a device you will profit from. At least not in btc. While it would be great if demand for these was such that we could make 10,000 units at a time and everyone would profit....that's not going happen. Our run was for less than 120 and these are the last 30 or so.
But damn. They are so much fun.
-brand new folks testing the water,
-enthusiasts who have collected many if not all USB miners ever made,
-wanna be EE's (and real ones) who like to tinker,
-bitcoin fans who want to mine at work in their cubicle,
-berated husbands whose wife will leave them if they bring another f%&k*! HOT and LOUD machine in the house.
-insert your reason here.
This is not a device you will profit from. At least not in btc. While it would be great if demand for these was such that we could make 10,000 units at a time and everyone would profit....that's not going happen. Our run was for less than 120 and these are the last 30 or so.
But damn. They are so much fun.
June 26, 2014, 03:54:15 PM
USB miners hashing power have improved recently with the coming of smaller microchips.
Slightly better than worthless is still worthless.
After the next difficulty adjustment in a few days, these will generate $.25 per day at best. That's a minimum of 400 days for RoI if difficulty never goes up. They're worthless.
You are right.Just saying that they also improved the architecture along with other mining giants.
June 26, 2014, 01:32:26 PM
USB miners hashing power have improved recently with the coming of smaller microchips.
Slightly better than worthless is still worthless.
After the next difficulty adjustment in a few days, these will generate $.25 per day at best. That's a minimum of 400 days for RoI if difficulty never goes up. They're worthless.
June 26, 2014, 01:12:17 PM
USB miners hashing power have improved recently with the coming of smaller microchips.
June 26, 2014, 05:30:18 AM
At this price it's just a toy for fans...
Just like most miners out there - except considerably smaller and less noisy 
The units are highly overpriced
From what point of view?In-its-class products: The only other StickMiner in its class, the hex•fury, is 1.6x the price.
USD/Ghash-wise, it's only mildy higher than the Antminer U2, but you'd need 7-8 of those to match the hash rate.
Sum-of-its-parts: sure, but that's the price of buying a finished product. vs3 plans to offer some DIY kits which, if you can source the Bitfury chips (and probably the heat sinks), should be substantially cheaper. But you'll have to put it together yourself.
Market price: on e-bay they're going for $50+ in an auction - but you do have to compete against other bidders
The buy-it-now is slightly higher than the price listed here at this time. Still, if that's more the price you had in mind, try your luck there.ROI: Like I said, it won't give net positive financial ROI - just like pretty much every miner out there. Just for kicks, a naive calculation on when it would ROI gives a product price of ~$20 (though with the difficulty once again rising quickly, expect that to need to be lower still). That's just not going to happen for a low-volume product.
June 26, 2014, 04:59:03 AM
The units are highly overpriced
June 26, 2014, 04:53:24 AM
At this price it's just a toy for fans...
June 26, 2014, 04:39:05 AM
by the way - 11GH is about the lowest I've ever seen (even when using the worst hubs I can find around) and with a slightly better hub (and a bit of air flow) you can easily get to 15-16GH :
bfgminer version 4.0.0 - Started: [2014-06-25 22:21:39] - [ 0 days 04:06:37]
Manage devices Pool management Settings Display options
Pool 0: stratum.bitcoin.cz Diff:37 +Strtm LU:[02:27:55] User:vs3.nanofury1
Block: ...925317b2 #307906 Diff:13.5G (96.37P) Started: [02:20:54]
ST:26 F:31 NB:36 AS:0 BW:[ 50/ 43 B/s] E:272.60 I:84.24uBTC/hr BS:913k
4/24 | 56.61/56.70/53.74Gh/s | A:5252 R:33+114(1.8%) HW:6522/3.3%
-------------------------------------------------------------------------------------------
NFY 0: | 12.42/12.39/11.86Gh/s | A:1148 R: 4+ 29(1.7%) HW:1051/2.5%
NFY 1: | 16.10/16.11/15.07Gh/s | A:1441 R:13+ 37(2.3%) HW:2221/4.0%
NFY 2: | 12.41/12.39/11.89Gh/s | A:1195 R: 4+ 23(1.3%) HW:1062/2.5%
NFY 3: | 15.87/15.87/14.97Gh/s | A:1471 R:12+ 25(1.7%) HW:2193/4.0%
-------------------------------------------------------------------------------------------
the two underperforming ones are on a not-so-good hub and the two that do 15GH+ are using a sub-$20 Amazon Basics 7-port hub with 4A power supply. I don't have any more NF6 left around - that hub could easily take at least one or two more NanoFury NF6.
And as for convenience - I think this is among the easiest (if not The Easiest) device to enter the hashing world - it is literally just plug-and-play ... it doesn't get any more easier than that ... Or if someone has any ideas - please share!
bfgminer version 4.0.0 - Started: [2014-06-25 22:21:39] - [ 0 days 04:06:37]
Manage devices Pool management Settings Display options
Pool 0: stratum.bitcoin.cz Diff:37 +Strtm LU:[02:27:55] User:vs3.nanofury1
Block: ...925317b2 #307906 Diff:13.5G (96.37P) Started: [02:20:54]
ST:26 F:31 NB:36 AS:0 BW:[ 50/ 43 B/s] E:272.60 I:84.24uBTC/hr BS:913k
4/24 | 56.61/56.70/53.74Gh/s | A:5252 R:33+114(1.8%) HW:6522/3.3%
-------------------------------------------------------------------------------------------
NFY 0: | 12.42/12.39/11.86Gh/s | A:1148 R: 4+ 29(1.7%) HW:1051/2.5%
NFY 1: | 16.10/16.11/15.07Gh/s | A:1441 R:13+ 37(2.3%) HW:2221/4.0%
NFY 2: | 12.41/12.39/11.89Gh/s | A:1195 R: 4+ 23(1.3%) HW:1062/2.5%
NFY 3: | 15.87/15.87/14.97Gh/s | A:1471 R:12+ 25(1.7%) HW:2193/4.0%
-------------------------------------------------------------------------------------------
the two underperforming ones are on a not-so-good hub and the two that do 15GH+ are using a sub-$20 Amazon Basics 7-port hub with 4A power supply. I don't have any more NF6 left around - that hub could easily take at least one or two more NanoFury NF6.
And as for convenience - I think this is among the easiest (if not The Easiest) device to enter the hashing world - it is literally just plug-and-play ... it doesn't get any more easier than that ... Or if someone has any ideas - please share!
June 25, 2014, 04:47:48 PM
Don't use logic damn you!
Logic dictates neither are going to see net positive financial ROI - in which case, I'd rather have something I can plug into a hub and have it not take up all that much space.(Though I have defended the R-Box as well.
Of course, I am biased
This may well be 'The Last StickMiner', as most of the new chips appear to be ill-suited to this form-factor. 
June 25, 2014, 04:34:23 PM
Dam, 100 bucks for 15 GH/s! Like the tech specs and power usage and all, but man who'd actually pay $100 for 15 GH/s.
R-boxes are $60 for 32 GH/s. Even with the R-box's greater power consumption, hard to overcome the entry price of this Nano Fury compared to it.
R-boxes are $60 for 32 GH/s. Even with the R-box's greater power consumption, hard to overcome the entry price of this Nano Fury compared to it.
June 25, 2014, 04:30:33 PM
Nice. I'll give you 20 bucks for it.
June 25, 2014, 04:24:57 PM
11 Gh/s (stock) Nano Fury 6 USB Bitcoin Miner v0.3
by Moonlight Miner, Design by vs3
Six Chip Bitfury USB ASIC Miner
JULY SPECIAL - 3x NF6 for $255
11 Gh/s Nano Fury II USB Bitcoin Miner v0.3
by Moonlight Miner, Design by vs3
Six Chip Bitfury Rev. 2 USB ASIC Miner
Specs and Info:
- LOWEST PRICED 11 Gh/s USB MINER AVAILABLE
- NOT a Pre-Order -- In stock for immediate shipment
- Each miner contains SIX Bitfury (Rev.2) ASIC Chips
- Super Easy Install - No additional drivers needed for most computers
- Requires current version of BfgMiner
- Overclockable - speed of 11-14.5 Gh/s at 53-55 bits - stability can reduce
with increased speed. 11-12 Gh/s requires 1.2A(amp). +/-10% speed variance due to chip quality. - 15 Gh/s speed needs 1.5A per device. It is unlikely you will be able to utilize each port in a powered USB hub. In
tests a 10 port "Juiced Systems" USB 3.0 powered hub ran 4 miners and a USB fan comfortably. - Miners may exceed 14-15 Gh/s but have NOT been tested above BfgMiner oscillator settings
of 55 bits. Running at higher speeds may damage the miner and will void the 30 day warranty. - Light to medium air circulation required for speeds overclocking. USB fans work very well.
Info on MAC OS support thanks to Nate Woolls.
asics/">http://blog.nwoolls.com/2014/04/10/bitcoin-mining-on-mac-os-x-nanofury-2-asics/
Pricing:
- 1-10 Units - $99.99
JULY SPECIAL - 3x NF6 for $255
How soon can I get them? **Ships in 1 Business Day or Less**
FREE USA Domestic USPS First Class shipping is included.
Promise it will work?:
All miners are tested twice before they are shipped. Once by the Developer himself, then again by
Moonlight Miner.
We have a 30 day replacement warranty for each device. No refunds.
Warranty void if overclocked above 55 bits or used without some form of air movement/fan.
Who's the Brains behind this?
Nano Fury is an open source design developed by Bitcointalk.org forum member "vs3." We encourage BTC
donations for the developer at 1AHvViTD5wohPywNYHi8NZ8uPhbY9dZXCY.
Details of the design, files and questions for the developer can be found at https://bitcointalksearch.org/topic/nanofury-project-open-source-design-321287
How do I buy these?
EDIT - Webstore is now up. Go to:
http://www.moonlightminer.com
We have not tested many hubs conclusively at this point but believe amp capacity to be the only limiting factor. You can
use USB 2.0 or 3.0 hubs. 3.0's typically have greater capacity. Please refer to this comprehensive list of hubs that been
tested: https://bitcointalksearch.org/topic/which-usb-hub-to-use-with-block-erupters-nanofury-nf1-bpmc-red-fury-ant-u1-253749
The original Nano Fury Open Source thread offers quality community support at https://bitcointalk.org/index.php?
topic=321287.0
If you are unable to have your question answered through these resources contact Moonlight Miner Support
[email protected]
Jump to: