Hi all,
just wanted to know if the old SK21 blockchain is alive and how can I sync the wallet, because my coins from https://www.bilbotel.fr can't be received (xevan algo).
Thank you in advance!
Topic: ANN-[SK21] Masternodes-mixing-darksend [POW-POS SWAP] (Read 4267 times)
is this project still alive not been a lot of updates, do the masternodes work and what's the roi?
add node! telegram ou discord
Hi, good project. I can find info about total/circulation supply
The sk21 wallet in nova exchange is under maintenance for a longer time. how can I transfer my 100K plus of sk21 coin from nova to my wallet in masternodes?
With the sync issue fixed, new market and more pools, this is an undervalued MasterNode coin. I am glad this is still cheap so I can get one. Thanks for all the work.
SKULL EVOLUTION [SK21] MINING POOL
http://miningpool.shop
Based on Yiimp pool (No Registration Needed)
Payout : Every 3 hours (Faster Payment)
Fee : 0.9% (Lowest Fee)
http://miningpool.shop
Based on Yiimp pool (No Registration Needed)
Payout : Every 3 hours (Faster Payment)
Fee : 0.9% (Lowest Fee)
Code:
-o stratum+tcp://eu1.miningpool.shop:3739 -u -p c=SK21
Is it safe to transfer from NovaExchange to wallet? Are they on a different chain
Good afternoon. Novaexchange.com the bidding closes, and the purse is not active DEV what You think about the fate of this coin, what are your plans? When will be restored to the blockchain?
nova exchange seem to be on a different chain...
I have blocks and peers to 8578 while nova is 8369
I have blocks and peers to 8578 while nova is 8369
Hello,
The wallet not syncing, wait for several days. What's wrong with wallet ?
The wallet not syncing, wait for several days. What's wrong with wallet ?
why are masternodes not staying enabled???
Theres no volume on Nova, could this be the reason that it isn't on CMC? I like the project but never heard of this project before and not quite sure I understand where its at in it swapping transition.
Hi,
We've added SK21 to the miners multipool: www.zpool.ca
xevan pool:
http://www.zpool.ca/site/gomining?algo=xevan
Blocks found by zpool:
http://www.zpool.ca/site/block?id=2503
Explorer:
http://www.zpool.ca/explorer/SK21
Peers:
http://www.zpool.ca/explorer/peers?id=2503
Cheers!
We've added SK21 to the miners multipool: www.zpool.ca
xevan pool:
http://www.zpool.ca/site/gomining?algo=xevan
Blocks found by zpool:
http://www.zpool.ca/site/block?id=2503
Explorer:
http://www.zpool.ca/explorer/SK21
Peers:
http://www.zpool.ca/explorer/peers?id=2503
Cheers!
skull look like cool logo, i like it new face and new brand i hope this coin lifted the moon
follow, retweet done and
tweet : https://twitter.com/dayatlo1/status/911625493065064448
comment bitcoingarden at Reply #28 : https://bitcoingarden.org/forum/index.php?topic=19259.msg199240#msg199240
wallet : SjWXm5r4qVEYBSCF45yQ7LsP24fMe6HHRf
follow, retweet done and
tweet : https://twitter.com/dayatlo1/status/911625493065064448
comment bitcoingarden at Reply #28 : https://bitcoingarden.org/forum/index.php?topic=19259.msg199240#msg199240
wallet : SjWXm5r4qVEYBSCF45yQ7LsP24fMe6HHRf
node please!
how much is the max supply?
Just started mining this one, looks like a nice future investment 
Ok the thread has moved to this position: https://bitcointalk.org/index.php?topic=2184386.new#new
Please disregard this thread and head over to the more appropriate thread.
Thank you and have a great day/evening,
Brazilman37BTC
How much you are paying for translation bounty? I want to reserve Hindi translation. Let me know if I can start or not
soon skull will go to moon buy and hold
Some retarded post Ann here, 300 views and skull from 60 to 150, once this post is moved, price x 10
soon skull will go to moon buy and hold
Sorry a question, why this Ann is in services section?? It must be moved to Altcoin announcements...you should have already 20k views and 20 pgs thread dude
Perfect explained dev, so glad I am setting up my mastered and never did before, easy as fuck.
I want to buy 1 whole bitcoin worth skull I offer escrow. Please contact me ASAP.
I buy now, I pay good
I want to buy 1 whole bitcoin worth skull I offer escrow. Please contact me ASAP.
I buy now, I pay good
it should work now, where are the pools btw?
that is a good question. were hoping some people will jump onboard soon and get some pools going. for now only solo-mining.
Have a great day,
Brazilman37BTC
it should work now, where are the pools btw?
problem compiling?
THE QT IS RENAMED LOCALLY ,VSYNC TO SKULL RENAME
run the node or
RUN MAKE instead of MAKE INSTALL
or recursively seach replace in command line on qt folder
should skull-cli and skull-tx build
./autogen.sh ./configure make
same dependences as bitcoin
the node builds fine
Brazilman37BTC
THE QT IS RENAMED LOCALLY ,VSYNC TO SKULL RENAME
run the node or
RUN MAKE instead of MAKE INSTALL
or recursively seach replace in command line on qt folder
should skull-cli and skull-tx build
./autogen.sh ./configure make
same dependences as bitcoin
the node builds fine
Brazilman37BTC
if not works try to run it with sudo
do sudo make install node builds fine on vps
run autogen again and configure with incompatible bdb and make install
sudo mv test_vsync test_skull
autogen configure make
In src/test
Sudo rm -r tests
autogen configure make
left over code
YOU CAN MINE NOW FROM YOUR WALLET
we are having some issues with the code, everything is fine but the long wallet nightmare we had, is now extended to exchanges and pools,,we are working on it , this is a great chance for everyone to get coins with your laptop through wallet cpu solo mining and won't last for ever, we are actively working in solutions that will arrive in any moment
to mine download wallet make your conf.file named skull.conf and install it at the skull roaming file. Open your wallet, synchronize and
just go tools>debug console>type ''setgenerate true''
and you are mining
we are having some issues with the code, everything is fine but the long wallet nightmare we had, is now extended to exchanges and pools,,we are working on it , this is a great chance for everyone to get coins with your laptop through wallet cpu solo mining and won't last for ever, we are actively working in solutions that will arrive in any moment
to mine download wallet make your conf.file named skull.conf and install it at the skull roaming file. Open your wallet, synchronize and
just go tools>debug console>type ''setgenerate true''
and you are mining
Brazilman37BTC
problem compiling?
THE QT IS RENAMED LOCALLY ,VSYNC TO SKULL RENAME
run the node or
RUN MAKE instead of MAKE INSTALL
or recursively seach replace in command line on qt folder
should skull-cli and skull-tx build
./autogen.sh ./configure make
same dependences as bitcoin
the node builds fine
Brazilman37BTC
THE QT IS RENAMED LOCALLY ,VSYNC TO SKULL RENAME
run the node or
RUN MAKE instead of MAKE INSTALL
or recursively seach replace in command line on qt folder
should skull-cli and skull-tx build
./autogen.sh ./configure make
same dependences as bitcoin
the node builds fine
Brazilman37BTC
Hello everyone, Our new Twitter page is live. please go there and help support this coin by following.
https://twitter.com/Sk21Coin
Thank you,
Brazilman37BTC
https://twitter.com/Sk21Coin
Thank you,
Brazilman37BTC
Great to see how helpful the developer is in the Slack channel.
Addnodes are working, mining is working (oh my poor laptop
).everything great so far!
Great coin, cool project. Happy to be on board !
Addnodes are working, mining is working (oh my poor laptop
).everything great so far!Great coin, cool project. Happy to be on board !
Any Addnodes?
nodes are in the ann, if you cant synchronize is some local error check slack for more info, i also saw this in slackMINE NOW FROM YOUR WALLET
as is not a pool yet
no high hash rate
just go tools>debug console>type ''setgenerate true''
and you are mining (just mined 2 blocks
)You guys join slack dev is around all the time and no left question without answer, they will be testing masternodes tonight they really work hard this coin will go far away
Any Addnodes?
this coin is mineable for years,no pool, no fun. anyway, I will buy some skull to swap with this.
Please dev check my pm I have a coin I need master nodes too
Please dev check my pm I have a coin I need master nodes too
How long this 100 k mining block?
this coin using same AMS algo, it might fit at ZPOOL or BRITONPOOL
How long this 100 k mining block?
Any mining pool??, I was trying to compile to set one but my pool does not admit this algo, many people would mine the 100k blocks @ 8o coins reward,,
NEWS:
-MINING POOL WANTED!
-50 PAX AIRDROP STARTING NOW
-PSP SWAP OPEN NOW 1:1
-NOVA EXCHANGE WILL SWAP 1:1 WHEN THEY COMPILE
-OPEN TRANSLATION BOUNTY RESERVE TO QUALIFIED CANDIDATES
-MINING POOL WANTED!
-50 PAX AIRDROP STARTING NOW
-PSP SWAP OPEN NOW 1:1
-NOVA EXCHANGE WILL SWAP 1:1 WHEN THEY COMPILE
-OPEN TRANSLATION BOUNTY RESERVE TO QUALIFIED CANDIDATES
here we are lady's and gentlemen. We are making serious progress.
Brazilman37BTC
We are offering bounty reservations. For example mac wallet/ explorer / translations. inquire within.
Have a great day,
Brazilman37BTC
Brazilman37BTC
Have a great day,
Brazilman37BTC
Nova exchange will host the swap , but for those willing early swap can make p2p through slack channel ratio 1:1
Brazilman37BTC
After weeks of hard work along with other devs and blockchain experts we finally can release SK21 , the skull evolution coin, we aimn't to have another coin, we aim to do the best with our skull coin and we've decided for masternodes. So we offer the same premined amount of skull circulating in swap 1:1 ratio to our users and new comers.
Coin Specs:
ALGO:XEVAN
Dark Gravity wave retarget
250k Collateral
Pow-Pos
Pow
Block time 300 sec
Reward 80 coins x blockk + 20% masternode
Final POW block 100000
Premine for swap 30000000
Ports rpc: 72013 p2p: 25070
Pos
- 10% Pos reward roughly every 40k blocks
+ %90 to pos and MN
Other features:
Instant-tx
Darksend
Obfuscation:coinjoin
Masternode set up 250k coins
How to set up a masternode tutorial
WELCOME TO Brazilman37BTC's MASTERNODE SETUP GUIDE!
Hi,
welcome. I have found Masternode ownership to be a very rewarding experience, teaching me about computers and different operating systems, as well as making me extra money that would just be sitting in my wallet anyway!
BEFORE YOU BEGIN, YOU WILL NEED:
- 250,000 Skull (SK21)
- The latest Skull (SK21) wallet, which can always be found here: https://goo.gl/HH3oZE
- wallet must be installed and synced and coin must be available for use. (not pending)
- An ability to follow instructions to the letter.
- If you dont have a clue as to how to modify or create a .conf file? Well, my friend your in the wrong place. This tutorial is for informational purposes only.
- If you follow instructions you will have a succesfully created masternode.
- Good luck and have a nice day!!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LET'S GET STARTED!
First, you will need to make sure your wallet is backed up and unlocked to support the Masternode setup.
Please bear in mind the following safety tips:
- Always do a backup of your WALLET.DAT if you have Skull (SK21) on your computer.
- Think twice before deleting or overwriting anything, as there is no way back...Post here for help.
- Never copy WALLET.DAT when your wallet is running! Please use the BACKUP WALLET command from within your wallet instead.
Ok now your ready to get down to business......
Next step is to go to the tools tab in upper left corner, then once that window pops down look for debug console. That will open a second window, it is your debug window where you can enter commands for your wallet.
- In the debug window on the command line you will want to type this command "masternode genkey" without the quotes of course. Done so far? Very good, now the next step is to enter another command in the same line, dont worry you will have use for the info that the last command produced.
- Ok next step: in the command line type the following "getaccountaddress MyMasternode" again without quotes. that produces another result in the window. Next step: you want to close out the debug window for now.
- Now, you have the main wallet window, click the send tab to go to the area to send coins. Next: send exactly 250,000 Skull (SK21) coins the address you generated in the debug window (that part is really not tough, just double click to highlight then copy and paste that to the send address in the send tab.
- Next step: reopen the debug window again. In the command line enter the following command "masternode outputs" and then you will want to leave that open for now.
- Next step: you should know how to find the masternode.conf file thats been included with this coins setup files. As implied ealier in this tutorial, if you dont have a clue as to how you can find that file? Maybe you shouldnt be doing this. If in doubt stop right here and open another browser window do some reasearch on how to do that.
- Next step: your going to want to right click that file and edit it. that will open the notepad and allow you to start editing the file.
- Next step: ok you will see the first couple lines are only for instructional use. the last line is what you want to use. You need to replace that ip address with your own (you should know how to do this already) if not there is info in forums showing how.
- Next step: ok so basically all you replace is the alias for example i named my masternode mn1 , then replace ip and leave the :25070, then you replace the next set of chars (883uXHwWXgkb7zvSF1SzdKDgtahXbSpGSgiMqqZr57MMDS61X1u) with the masternodeprivkey you generated in the debug window. and please indlude the spaces as seen in example or will not work.
- Next step: next you replace the next set of chars (cb94f8538298dfc6503c3241933da301be8ebeb8969e6afb331d47b7901a24b9) with the collateral_output_txid
- Next step: you have the final value which in example is 0 and you will replace as same.
- Next step: now you close the debug window.
- Next step: backup the wallet.dat file
- Next step: shut down the wallet and restart it.
- Next step: it may give you the message of block error, then it may also ask if you would like to reload the block info or smoething like that. click yes and it will be fast.
- Next step: once youve done that open the masternode window and you should see your newly created masternode. If you see it and see it says missing? Don't worry just click at lower left bottom start masternode. Then after a minute you can look up and see the statuus of the masternode is now enabled.
Congratulations!!!!!!
You have successfully created the SK21 masternode.
Written by Brazilman37BTC
if not using wallet for masternode use node for normal wallet.
Imediate Roadmap
-Premining and Mainnet test
-Masternode mainet test
-Mining Pools
-Swap with old skull coins (not mandatory) Exchange is compiling now
-Specific information and guide to set masternode dark send mix and other coin features
-WebSite and Media
-Masternodes for dummies
-Strong crypto exchanges
-Games development
New Twitter page here:
https://twitter.com/Sk21Coin
1st AID & Early Swap at our Slack
https://join.slack.com/t/pirateblocks/shared_invite/MjIzMTAxNjExMTczLTE1MDIwODgyNzItMTFjMWU0ZTc1Ng
DOWNLOAD
to apply for airdrop :
(only 50 p)
-download wallet and get address
-tweet: '' new $sk21 skull evolution is live, masternodes-mix-dark send-airdrop https://bitcointalk.org/index.php?topic=2176430.new#new''
attaching a logo picture to the tweet
-retweet : https://twitter.com/Sk21Coin/status/908391073013227526
-Post a support comment at https://bitcoingarden.org/forum/index.php?topic=19259.msg195684#msg195684 about our coin
(a comment, not three words or repite other posts)
this 4 task will receive a reward of 10$ worth sk-21 that will be paid as the airdrop 50 people registered post their proofs only in reply to this thread and quoting this message
to swap your coins:
option a: send skull to PAZA6DMFyfGakrs3fKhXQS7UgMPjYhkP3h with attached following info:
-amount sent & txid
-sk21 address to receive your sk21
option b: wait nova to compile and change your coins at nova
THERE ARE NO BONUSES AND SWAP RATIO IS ALWAYS 1-1
SWAPPED SKULL WILL BE BURNT AFTER A SECURITY PERIOD OF 15 DAYS AFTER THE SWAP NOT BE REFUNDABLE
ONLY CAN RESTORE SWAPPED SKULL IN CASE OF SK21 FAILURE
YOU CAN MINE NOW FROM YOUR WALLET
Coin Specs:
ALGO:XEVAN
Dark Gravity wave retarget
250k Collateral
Pow-Pos
Pow
Block time 300 sec
Reward 80 coins x blockk + 20% masternode
Final POW block 100000
Premine for swap 30000000
Ports rpc: 72013 p2p: 25070
Pos
- 10% Pos reward roughly every 40k blocks
+ %90 to pos and MN
Other features:
Instant-tx
Darksend
Obfuscation:coinjoin
Masternode set up 250k coins
How to set up a masternode tutorial
WELCOME TO Brazilman37BTC's MASTERNODE SETUP GUIDE!
Hi,
welcome. I have found Masternode ownership to be a very rewarding experience, teaching me about computers and different operating systems, as well as making me extra money that would just be sitting in my wallet anyway!
BEFORE YOU BEGIN, YOU WILL NEED:
- 250,000 Skull (SK21)
- The latest Skull (SK21) wallet, which can always be found here: https://goo.gl/HH3oZE
- wallet must be installed and synced and coin must be available for use. (not pending)
- An ability to follow instructions to the letter.
- If you dont have a clue as to how to modify or create a .conf file? Well, my friend your in the wrong place. This tutorial is for informational purposes only.
- If you follow instructions you will have a succesfully created masternode.
- Good luck and have a nice day!!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LET'S GET STARTED!
First, you will need to make sure your wallet is backed up and unlocked to support the Masternode setup.
Please bear in mind the following safety tips:
- Always do a backup of your WALLET.DAT if you have Skull (SK21) on your computer.
- Think twice before deleting or overwriting anything, as there is no way back...Post here for help.
- Never copy WALLET.DAT when your wallet is running! Please use the BACKUP WALLET command from within your wallet instead.
Ok now your ready to get down to business......
Next step is to go to the tools tab in upper left corner, then once that window pops down look for debug console. That will open a second window, it is your debug window where you can enter commands for your wallet.
- In the debug window on the command line you will want to type this command "masternode genkey" without the quotes of course. Done so far? Very good, now the next step is to enter another command in the same line, dont worry you will have use for the info that the last command produced.
- Ok next step: in the command line type the following "getaccountaddress MyMasternode" again without quotes. that produces another result in the window. Next step: you want to close out the debug window for now.
- Now, you have the main wallet window, click the send tab to go to the area to send coins. Next: send exactly 250,000 Skull (SK21) coins the address you generated in the debug window (that part is really not tough, just double click to highlight then copy and paste that to the send address in the send tab.
- Next step: reopen the debug window again. In the command line enter the following command "masternode outputs" and then you will want to leave that open for now.
- Next step: you should know how to find the masternode.conf file thats been included with this coins setup files. As implied ealier in this tutorial, if you dont have a clue as to how you can find that file? Maybe you shouldnt be doing this. If in doubt stop right here and open another browser window do some reasearch on how to do that.
- Next step: your going to want to right click that file and edit it. that will open the notepad and allow you to start editing the file.
- Next step: ok you will see the first couple lines are only for instructional use. the last line is what you want to use. You need to replace that ip address with your own (you should know how to do this already) if not there is info in forums showing how.
- Next step: ok so basically all you replace is the alias for example i named my masternode mn1 , then replace ip and leave the :25070, then you replace the next set of chars (883uXHwWXgkb7zvSF1SzdKDgtahXbSpGSgiMqqZr57MMDS61X1u) with the masternodeprivkey you generated in the debug window. and please indlude the spaces as seen in example or will not work.
- Next step: next you replace the next set of chars (cb94f8538298dfc6503c3241933da301be8ebeb8969e6afb331d47b7901a24b9) with the collateral_output_txid
- Next step: you have the final value which in example is 0 and you will replace as same.
- Next step: now you close the debug window.
- Next step: backup the wallet.dat file
- Next step: shut down the wallet and restart it.
- Next step: it may give you the message of block error, then it may also ask if you would like to reload the block info or smoething like that. click yes and it will be fast.
- Next step: once youve done that open the masternode window and you should see your newly created masternode. If you see it and see it says missing? Don't worry just click at lower left bottom start masternode. Then after a minute you can look up and see the statuus of the masternode is now enabled.
Congratulations!!!!!!
You have successfully created the SK21 masternode.
Written by Brazilman37BTC
if not using wallet for masternode use node for normal wallet.
Imediate Roadmap
-Premining and Mainnet test
-Masternode mainet test
-Mining Pools
-Swap with old skull coins (not mandatory) Exchange is compiling now
-Specific information and guide to set masternode dark send mix and other coin features
-WebSite and Media
-Masternodes for dummies
-Strong crypto exchanges
-Games development
New Twitter page here:
https://twitter.com/Sk21Coin
1st AID & Early Swap at our Slack
https://join.slack.com/t/pirateblocks/shared_invite/MjIzMTAxNjExMTczLTE1MDIwODgyNzItMTFjMWU0ZTc1Ng
DOWNLOAD
NEWS:
-MINING POOL WANTED!
-50 PAX AIRDROP STARTING NOW
-PSP SWAP OPEN NOW 1:1
-NOVA EXCHANGE WILL SWAP 1:1 WHEN THEY COMPILE
-OPEN TRANSLATION BOUNTY RESERVE TO QUALIFIED CANDIDATES
-MINING POOL WANTED!
-50 PAX AIRDROP STARTING NOW
-PSP SWAP OPEN NOW 1:1
-NOVA EXCHANGE WILL SWAP 1:1 WHEN THEY COMPILE
-OPEN TRANSLATION BOUNTY RESERVE TO QUALIFIED CANDIDATES
to apply for airdrop :
(only 50 p)
-download wallet and get address
-tweet: '' new $sk21 skull evolution is live, masternodes-mix-dark send-airdrop https://bitcointalk.org/index.php?topic=2176430.new#new''
attaching a logo picture to the tweet
-retweet : https://twitter.com/Sk21Coin/status/908391073013227526
-Post a support comment at https://bitcoingarden.org/forum/index.php?topic=19259.msg195684#msg195684 about our coin
(a comment, not three words or repite other posts)
this 4 task will receive a reward of 10$ worth sk-21 that will be paid as the airdrop 50 people registered post their proofs only in reply to this thread and quoting this message
to swap your coins:
option a: send skull to PAZA6DMFyfGakrs3fKhXQS7UgMPjYhkP3h with attached following info:
-amount sent & txid
-sk21 address to receive your sk21
option b: wait nova to compile and change your coins at nova
THERE ARE NO BONUSES AND SWAP RATIO IS ALWAYS 1-1
SWAPPED SKULL WILL BE BURNT AFTER A SECURITY PERIOD OF 15 DAYS AFTER THE SWAP NOT BE REFUNDABLE
ONLY CAN RESTORE SWAPPED SKULL IN CASE OF SK21 FAILURE
YOU CAN MINE NOW FROM YOUR WALLET
Update!!!!
Sample images of new SK21 casino gaming site. e are aware of spelling errors and coin image errors as we wanted to put out some samples to help keep everyone with an idea of whats to come. This site will go live very soon. Stay tuned!!!
More news as it becomes available!!!
Sample images of new SK21 casino gaming site. e are aware of spelling errors and coin image errors as we wanted to put out some samples to help keep everyone with an idea of whats to come. This site will go live very soon. Stay tuned!!!
More news as it becomes available!!!
Jump to: