Pages:
Author

Topic: [ANN] TeamRedMiner v0.10.10 - Ironfish/Kaspa/ZIL/Kawpow/Etchash and More (Read 211245 times)

hero member
Activity: 2016
Merit: 608
Online Security & Investment Corporation
I didnt understand properly. How to use it ?
For example: ABEL + GRAM dual mining.
I can do dual mining. but I need to know intensity setting properly.
Someone explain it please ?


Code:
teamredminer
intensity: 100:1:0
The dual mining tuner needs scoring weights for how much 1 MH/s of the primary and dual algo are worth. There are defaults built into the miner that were valid when each algo was implemented and added, but as network hashrates and market prices move, new values may need to be provided. This argument provides three values X:Y:Z all expected to be positive numbers

X  Score for 1 MH/s of the primary algo (typically ethash).

Y  Score for 1 MH/s of the secondary algo (typically TON).

Z  Cost per 1 W of measured power. We recommend setting this to zero for now.

For example ETH+TON:

100:1:0
+
  - based on manual relat-ive value: each MH/s of ETH is worth 100 MH/s of TON
jr. member
Activity: 125
Merit: 2
Radeon VII still problems with newer drivers,older drivers like 22.4.1 running without problem.
legendary
Activity: 1554
Merit: 981
Team Red Miner v0.10.18

Dusting off TON/GRAM mining, and a lots of other small fixes.

README highlights:

GPU: Added TON/GRAM for RDNA3 gpus.
GPU: Fixed TON/GRAM dual mining with abel and autolykos2.
GPU: Fixed broken kawpow on RDNA3 gpus.
GPU: Fixed loading Radeon VII kernels in general on newer drivers.
GPU: Fixed broken abel+ironfish dual mining.
GPU: Fixed old bug for ironfish mining on pools like Kryptex using email as wallet/username.
GPU: Fixed broken power read for some gpus on newer linux drivers.
GPU: Fixed broken kawpow mining on vultaic.
GPU: Patched broken job messages for new TON/GRAM pools.
GPU: Added --debug logging of network traffic for out-of-band stats for ABEL pools.

https://github.com/todxx/teamredminer/releases/tag/v0.10.18
Check all links with this post from the developer.
legendary
Activity: 1554
Merit: 981
Team Red Miner v0.10.17

Follow-up release enabling dual mining for abel as primary algo (in general) and karlsen/pyrin as dual algo. Also fixed various small issues in v0.10.16.

README highlights:

GPU: Added support for dual mining abel and kaspa/ironfish/karlsen/pyrin (and triple with zil).
GPU: Fixed pyrin invalid/dup shares on large gpus running high hashrates.
GPU: Moved dual zil session to R-mode as the default choice when mined together with ethash or abel.
GPU: Fixed some failed allocations for abel+zil.
GPU: Fixed abel dag allocation in R-mode on 6GB gpus like the 5600XT. It will run for a while longer.

https://github.com/todxx/teamredminer/releases/tag/v0.10.17

Check all links with this post from the developer.
member
Activity: 1557
Merit: 69
i waited long for this trm update. Glad it is here now. I had some fear that TRM leaving the space, because the guys do also stuff for industrial mining for big companies.
legendary
Activity: 1554
Merit: 981
Latest update 5-6months ago, hope that it's not dead project  Huh
No. TeamRedMiner is a very good and stable miner for AMD video cards. The developer has not released updates for new coins for almost 6 months, although the hashrate on the supported algorithms is no worse than on miners from other developers.

Team Red Miner v0.10.16


Chipping away at the backlog by adding three new algos (karlsen, pyrin, abel) and RDNA3 kawpow support. We're aware of planned algo changes and will likely follow forks. Abel has R-mode support. We don't expect this version of kawpow on RDNA3 to run well on display gpus without throttling with a manual --prog_config setting.

README highlights:

GPU: Added support for karlsen.
GPU: Added support for pyrin.
GPU: Added support for abel (R-mode supported, stats support on pools included).
GPU: Added kawpow support for RDNA3 GPUs.
FPGA: Fixed bug with ironfish on JC13.

https://github.com/todxx/teamredminer/releases/tag/v0.10.16

Check all links with this post from the developer.
legendary
Activity: 1766
Merit: 1002
its been a while not mining almost 1,5 year. buckle up some rigs. and get ready after upcoming correction to be expected
4 year cycle only 2year in profit mode. i'm not expecting to be good for amd card these day
jr. member
Activity: 125
Merit: 2
he just released a new version for small fix. from his comments it seems he might become more active again
nice to hear that,Hope they add heavyhash variants and at least kawpow support for RDNA3 cards.
jr. member
Activity: 62
Merit: 2
he just released a new version for small fix. from his comments it seems he might become more active again
jr. member
Activity: 62
Merit: 2
He still interacts on his official discord. 
legendary
Activity: 1638
Merit: 1577
Binance #SWGT and CERTIK Audited
Latest update 5-6months ago, hope that it's not dead project  Huh
No. TeamRedMiner is a very good and stable miner for AMD video cards. The developer has not released updates for new coins for almost 6 months, although the hashrate on the supported algorithms is no worse than on miners from other developers.
jr. member
Activity: 125
Merit: 2
Latest update 5-6months ago, hope that it's not dead project  Huh
newbie
Activity: 14
Merit: 0

With Phoenixminer I can mine coins with over 4GB Dag.

Please.. Any idea???
Drivers!
If you have old drivers, then update them. I noticed this problem with AMD video cards, when they gave such an error with the amount of information exceeding 4 GB, which needs to be used for the DAG file.



You are right. After my post, I tried to mine ETHW with TRM, which had about 6GB DAG, and it worked fine. I see at DAG generation "dual buffer mode":
GPU 0 Running kernels in dual buffer mode.
GPU 0 Starting DAG generation for epoch 618, 5.83 GB (dual buffer mode).

Kawpow algo run in "single buffer mode". I found command "--eth_dag_buf" to force buffer mode to Dual, but looks like it doesnt work under kawpow algo.

In usage.txt file I found, that older drivers not supported single buffer mode over 4GB. Unfortunately I really use very old driver (19.12.1), because all my cards works perfectly with it.
When I upgraded it to ANY newer, I had always some problems. Sad

Can I somehow forced this Dual buffer mode on Kawpow algo??
member
Activity: 219
Merit: 12
Polaris GPUs are finally on profit:
6x RX 580 4GB - AI Power Grid on Profit with TRM - https://www.youtube.com/watch?v=Ep3ntppV3RA
legendary
Activity: 1638
Merit: 1577
Binance #SWGT and CERTIK Audited

With Phoenixminer I can mine coins with over 4GB Dag.

Please.. Any idea???
Drivers!
If you have old drivers, then update them. I noticed this problem with AMD video cards, when they gave such an error with the amount of information exceeding 4 GB, which needs to be used for the DAG file.

newbie
Activity: 14
Merit: 0
Hello!
I cant mine Etc nor Eth with my Vega64. Trm v0.10.9-win Got message:

[2023-04-20 13:53:18] GPU 1 DAG allocation trying 8176.0 - 512.0 = 7664.0 MiB.
[2023-04-20 13:53:18] GPU 1 ERROR - failed to allocate ethash DAG buffer, tried down to 4088.0MiB.
[2023-04-20 13:53:18] GPU 1 thread exiting with error.

Under Phoenix miner I can mine Eth without problem.

I have enough Virtual memory, 60 GB (PM worked with 40GB, too).
I tried even to disable/enable my Gpu's, but nothing helped.

I cant mine even Ravencoin anymore.
I have Rx580 8GB, RX5700 and Vega64.
6 VGA in rig, 64GB Virtual memory, but got error message:
"ERROR - failed to allocate ethash DAG buffer". For EVERY type of my VGAs above.
I can mine other coins easily with less, than 4GB Dag.

With Phoenixminer I can mine coins with over 4GB Dag.

Please.. Any idea???
member
Activity: 219
Merit: 12
Dear DEV,

New coins and new algorithms on town and profiatble., and yourminers amd RDNA3 support is poor, many algo not supported, Are you going to update your miner?I get used to your miner, and perform well. Pls update asap.

Yup, definetely the best AMD miner but no recent updates sadly...
jr. member
Activity: 125
Merit: 2
Dear DEV,

New coins and new algorithms on town and profiatble., and yourminers amd RDNA3 support is poor, many algo not supported, Are you going to update your miner?I get used to your miner, and perform well. Pls update asap.
newbie
Activity: 1
Merit: 0
DINT + ZIL not working. can you look?
newbie
Activity: 4
Merit: 0
Hi, im using windows 11 and amd drivers v23.12.1 with rx6700xt

i try to set memory clock 1600mhz, but when miner start it stays 1988mhz. Fans have same problem, i set like it says in documentation, but cards ignore this settings. Core clock and power limits works fine.

Quote
teamredminer.exe -a kawpow -o stratum+tcp://cn.kawpow.k1pool.com:5100 -u KrbB9.%COMPUTERNAME% -p x --clk_core_mhz=1800,1800,1800,1800,1800,1800,1800,1800 --clk_core_mv=880,880,880,880,880,880,880,880 --clk_mem_mhz=1600,1600,1600,1600,1600,1600,1600,1600 --fan_default_big_navi=55::::20:80 --fan_debug --log_file=%HOMEPATH%\Desktop\logs\trm-%date%.log


Quote
[2023-12-17 06:51:09] Mining kawpow with 8 GPU workers
[2023-12-17 06:51:09] GPU PCIe      CUs CoreMHz SocMHz MemMHz TEdge TJct  TMem  FanPct  FanRpm  VDDC   Power  Prog Cfg
[2023-12-17 06:51:09] 0   03:00.0   40  1711               0      1988   72C   81C    0C   23.00%   779    887 mV 139 W  B640
[2023-12-17 06:51:09] 1   06:00.0   40  1715              0      1988   70C   81C    0C   24.00%   810    887 mV 136 W  B640
[2023-12-17 06:51:09] 2   10:00.0   40  1704              0      1990   71C   78C    0C   29.00%   961    887 mV 140 W  B640
[2023-12-17 06:51:09] 3   13:00.0   40  1731              0      1990   72C   77C    0C   23.00%   780    887 mV 137 W  B640
[2023-12-17 06:51:09] 4   16:00.0   40  1736              0      1990   71C   78C    0C   27.00%   899    887 mV 136 W  B640
[2023-12-17 06:51:09] 5   19:00.0   40  1702              0      1988   66C   85C    0C   33.00%  1119    887 mV 142 W  B640
[2023-12-17 06:51:09] 6   22:00.0   40  1707              0      1990   65C   71C    0C   26.00%   871    887 mV 143 W  B640
[2023-12-17 06:51:09] 7   25:00.0   40  1724              0      1990   58C   67C    0C   23.00%   779    887 mV 133 W  B640

i do something wrong?
Pages:
Jump to: