trminer
The miner is mainly used for mining coins on algorithms such as Lyra2REv2, Noscript, Time Travel 10, Groestl.Program for: NvidiaQuick startstep 1 download the program (archive)
step 2 unzip the archive to any convenient location
step 3 create bat files or edit ready made ones
Advanced setup options—i, — intensity-sets the intensity of mining. Default is 0. These values are selected by selecting parameters and comparing the result. For more fine-tuning, decimal values are allowed.
-t, - threads=N-set number of threads (default number of GPUs in your farm)
- cpu-priority-set priority. 0 - idle, 2 normal, 5 being the highest)
-- cpu-affinity set the proximity to the main cpu core by mask 0x3 for cores 0 and 1
Temperature, power consumption and overclocking:- tlimit=85 allows you to specify the temperature limit.
- max-temp=N-start mining only if the temperature is less than the specified value.
- plimit=180W allows you to set the power consumption limit.
-- mem-clock=3505 set overclocking memory
-- mem-clock=+500 set memory correction
----gpu-clock=1150 to set the overclocking of the core graphics card
Settings of connection pools:-P, - protocol-dump allows you to log events.
-- max-log-rate interval to reduce log (default: 3)
—d, — devices-displays video card IDs separated by commas. The report occurs with 0.
-n, — ndevs-display list of CUDA devices
—no-color-disable color display
-- hide-diff hide current block and net difficulty (old mode)
Working with the API:-b, --api-bind=port miner API port (default: 127.0.0.1: 4068), 0 disabled
-- api-remote allow remote control
--api-allow=... IP / mask of allowed api client (s), 0/0 for all
Other settings:—cuda-schedule-sets the scheduling mode for device threads (default auto)
—f,-diff — factor-divides complexity by this factor (default 1.0)
-m, - diff-multiplier-multiplies complexity by this factor (default 1.0)
- cert= - certificate file for SSL-enabled pool
- shares-limit-set the maximum namainenyh ball before exiting the program
—time-limit-set the time limit in seconds before exiting the program
-s, --scantime=N set upper limit on current job scan time, in seconds (default: 10)
-- submit-stale ignore stale validation jobs, can create more rejected jobs
- N, --statsavg number of samples used for power calculation (default: 30)
--no-gbt disable getblocktemplate support
--no-longpoll disable x-Long-Polling support
-- no-stratum disable X-Stratum support
--no-extranonce disable extranonce subscription to stratum
- q, --quiet disable hashrate output
- D, --debug enable debug messages
--max-rate=N[KMG] mine only if the net hash rate is less than the specified value
-- max-diff=N mine only if the difficulty is less than the specified value. You can configure with --resume-diff = N to set the value of the restart of production
--led=100 set logo led level (0=disable, 0xFF00FF for RVB)
-B, --background run the miner in the background
-- benchmark will run a video card test
-- cputest run CPU test
- c, --config=FILE load configuration file in JSON format
- V, --version show version information and exit
-h, --help show help and exit
miner: https://mega.nz/#!Y5YniCyb!HPqqkHUkHyCKxJdr7gQQQFl0RheoCLHxrtOOw1j9ud0ready bat files: https://mega.nz/#!Zsgj1YDB!X4NbdpvPtWGUYzRFJeYMGdiO6Ao3zWmU-EMWgQaPK9Y