If they are not available from AT, I have an extra I could part with.
Thanks. That is very nice from you but AT already contacted me.
So I'm a good at the moment - might come back to your offer again in future. 
Topic: [ANN] VaultBar - Hybrid BTC & ETH storage bar! (Read 21019 times)
Thanks. That is very nice from you but AT already contacted me.
So I'm a good at the moment - might come back to your offer again in future. 
If they are not available from AT, I have an extra I could part with.
Was wondering if this bars are still available? Would like to add one of these to my collection!
bump
Time for a small BTCump
Bars available and ready to ship
Bump
Quote
Too big image
Thanks for updating, I always forget about the size restrictions.
I'll take a bar.
Finally got this. It's heavy. It's shiny. Thanks!
Thanks for bumping, I didn't know about these. So these are buyer funded bars and only cost $75? Feel like im missing something
Correct. These bars are DIY. One side is for ETH and the other for BTC.
Each bar comes with approximately 6 holograms for multi-use.
Thanks
Thanks for bumping, I didn't know about these. So these are buyer funded bars and only cost $75? Feel like im missing something
Surprised that no one got around to making a client side QR generator.... the square is just over a half inch and fits snugly when cut close (and scans successfully on my current smartphone).
https://honeybadgerofmoney.com/qr.html
Just save the page itself locally, run the client side code with the internet disconnected, print cut save then delete the print job from memory... delete the client side code and delete your browser history for good measure too....
https://honeybadgerofmoney.com/qr.html
Just save the page itself locally, run the client side code with the internet disconnected, print cut save then delete the print job from memory... delete the client side code and delete your browser history for good measure too....
Congrats on the project and here's hoping you sell out. I agree with @Lauda that I would very much like to see the VaultBar in .999 silver hopefully in the future.
I've received a quote for the silver bars. It's quite costly and there's a minimum order so doubt it'll go ahead unless there is enough interest
Given the size of the current bar I guess it would be a 10oz silver one? Would definitely be interested, but can understand that you wouldn't proceed if it is not economically feasible.
I’ve never worked with silver before as doing so is quite complex in the U.K. What is the typical premium on custom silver minting?
These would be made abroad and hallmarked in the UK. The total silver used would be closer to 15oz.
Congrats on the project and here's hoping you sell out. I agree with @Lauda that I would very much like to see the VaultBar in .999 silver hopefully in the future.
I've received a quote for the silver bars. It's quite costly and there's a minimum order so doubt it'll go ahead unless there is enough interest
Given the size of the current bar I guess it would be a 10oz silver one? Would definitely be interested, but can understand that you wouldn't proceed if it is not economically feasible.
Congrats on the project and here's hoping you sell out. I agree with @Lauda that I would very much like to see the VaultBar in .999 silver hopefully in the future.
I've received a quote for the silver bars. It's quite costly and there's a minimum order so doubt it'll go ahead unless there is enough interest
I would like a bar also
Congrats on the project and here's hoping you sell out. I agree with @Lauda that I would very much like to see the VaultBar in .999 silver hopefully in the future.
Thanks! I still have quite a few bars left but I’m hoping to sell our eventually.
A silver bar would be cool but would only be feasible if there was enough demand for it.
Congrats on the project and here's hoping you sell out. I agree with @Lauda that I would very much like to see the VaultBar in .999 silver hopefully in the future.
I'll take a bar.
Bars bars bars... Get them whilst they’re hot!
Back in business after a short(ish) break. Still have plenty of bars available and ready to ship
Come on... You know you want one. Accepting orders 
He's right! You really do want one. They are awesome looking!
I finally got mine today. There was a bit of a delay getting it and I have been communicating with AT for a few weeks to try and find this thing.
He was extremely accommodating and professional even though he was not responsible for the delay at all.
I love the bars and AT has great customer service, I would recommend dealing with AT without hesitation!
Was a pleasure to do business with you. Glad you like the bar. Still have more ready to ship pending press via PM
Come on... You know you want one. Accepting orders
He's right! You really do want one. They are awesome looking!
I finally got mine today. There was a bit of a delay getting it and I have been communicating with AT for a few weeks to try and find this thing.
He was extremely accommodating and professional even though he was not responsible for the delay at all.
I love the bars and AT has great customer service, I would recommend dealing with AT without hesitation!
Come on... You know you want one. Accepting orders
I really need to check the Collectibles section more often. Just found this AT101ET and it looks amazing. Well done!
Thanks man
I really need to check the Collectibles section more often. Just found this AT101ET and it looks amazing. Well done!
Bars packed up and ready to ship. PM me to order
this is awesome to see this project finally coming to fruition- the finish on them is fantastic.
Thanks. It wouldn’t have been possible without your help. Yours should be shipping tomorrow and I think you’ll find that they’re even nicer in person
Will need to do a stock count for exact numbers but still have quite a few more in stock and ready to ship for those interested.
this is awesome to see this project finally coming to fruition- the finish on them is fantastic.
received my bars thank you vary much, awesome item, heavier than I thought.
best.
best.
Glad you like them. They are pretty heavy indeed. I think the weight adds a nice touch to them though
Still more available in stock for those who want.
received my bars thank you vary much, awesome item, heavier than I thought.
best.
best.
Bars still in stock and ready to ship. PM me to place an order
pm'd, Muuuusst hhaaaaaavvee!
Haha. Thanks
Wow. These are nice. I’ll take one. Sending pm now. Good job with the design.
Replied
I want one!
Hey, drop me a PM with the quantity and shipping location and I’ll supply the payment details and have the bar shipped out in no time
I want one!
Wow. These are nice. I’ll take one. Sending pm now. Good job with the design.
Bars still in stock and ready to ship. PM me to place an order
pm'd, Muuuusst hhaaaaaavvee!
Bars still in stock and ready to ship. PM me to place an order
I received my bars today, they are awesome !! nice weight and very very shiny ! me like !
not the best quality photo but I try to capture the BING
not the best quality photo but I try to capture the BING
Happy to hear you like them. The bars are super shiny indeed
Still have plenty in stock so get your orders in
I received my bars today, they are awesome !! nice weight and very very shiny ! me like !
not the best quality photo but I try to capture the BING
not the best quality photo but I try to capture the BING
All orders shipped
@ AT101ET - I would like 3 consecutive numbers please (do your best please ) .
Please send me total for 3 incl Special Delivery UK -> UK.
Zepher
) .Please send me total for 3 incl Special Delivery UK -> UK.
Zepher
Hey, bars aren’t numbered I’m afraid. I did experiment with numbering but it didn’t come as well as intended so I decided against it for the mass run.
@ AT101ET - I would like 3 consecutive numbers please (do your best please ) .
Please send me total for 3 incl Special Delivery UK -> UK.
Zepher
) .Please send me total for 3 incl Special Delivery UK -> UK.
Zepher
Last chance to order for weekend shipping
Here’s a quick assembly video. Might be worthwhile to reshoot one in the future but this should do in the meantime. https://youtu.be/Bdx9nVDK4r4
Still have plenty of bars available for sale.
Still have plenty of bars available for sale.
/lazy mode on
Could you please share the "squares" template (or at least indicate the size of each square), in order to create the keys and print them in the appropriate size?
/lazy mode off
Haha. No worries.
I could try and upload a template a little later. In the meantime, here are the dimensions used:
(In PowePoint) I created 6 adjacent squares (all 1.5cm x 1.5cm). The QR codes codes were 1.4cm x 1.4cm (evenly spaced in the squares) and the text (keys) depend on the font. - I'd recommend using a mono font for clarity though. The pub key can fit at a font size of 6 and the private keys in 5 (you can adjust this based on the font).
Here’s a quick assembly video. Might be worthwhile to reshoot one in the future but this should do in the meantime. https://youtu.be/Bdx9nVDK4r4
Still have plenty of bars available for sale.
Still have plenty of bars available for sale.
/lazy mode on
Could you please share the "squares" template (or at least indicate the size of each square), in order to create the keys and print them in the appropriate size?
/lazy mode off
Here’s a quick assembly video. Might be worthwhile to reshoot one in the future but this should do in the meantime. https://youtu.be/Bdx9nVDK4r4
Still have plenty of bars available for sale.
Still have plenty of bars available for sale.
All orders were shipped on Friday and relevant tracking has been PMed. US shipment went out too
Thanks mate, Looking forward to getting mine!
All orders were shipped on Friday and relevant tracking has been PMed. US shipment went out too
Thanks for everything. Sorry, I can't reply to your PM cause I'm limited to 2 a day... I have access to a hydraulic press was what I was referring too. Again thank you.
Can't wait for the bar.
Ps I've got a press you can use :p
Ps I've got a press you can use :p
Packaging the US orders now for shipment tomorrow.. If anyone else from the states wants to jump in then PM me
Looking good without a several-dozen-fold margin on production cost. It would be nice to have a silver (non gold plated) option too.
-snip-
Snowman, absolutely buy some for us.The thought crossed my mind.
I think these would look nice in silver too. However, even if it were to happen, it won't happen before a) these sell out or b) enough people commit to a small run for them as each runs is costly.
Awesome, they look great! I assume you don't number them (on the bars), right?
I did not. I experimented with numbering with the sampling but I felt that it looked tacky so opted against it. Having been said, there were 150 made but a number of them are being held back due to their quality. I’m yet to decide what to do with them but I am considering hammering them into pancakes
1 shortstack please. Side of home fries.
Haha. Now if only I could find a hydraulic press lying around. I have some power tools here which may be a more reasonable resort. Either way, I'll document the destruction and post it on here
I'm contemplating ordering some chemicals and sprays to have fun with different rustic finishes (patina and the like).
Awesome, they look great! I assume you don't number them (on the bars), right?
I did not. I experimented with numbering with the sampling but I felt that it looked tacky so opted against it. Having been said, there were 150 made but a number of them are being held back due to their quality. I’m yet to decide what to do with them but I am considering hammering them into pancakes
1 shortstack please. Side of home fries.
Awesome, they look great! I assume you don't number them (on the bars), right?
I did not. I experimented with numbering with the sampling but I felt that it looked tacky so opted against it. Having been said, there were 150 made but a number of them are being held back due to their quality. I’m yet to decide what to do with them but I am considering hammering them into pancakes
Looking good without a several-dozen-fold margin on production cost. It would be nice to have a silver (non gold plated) option too.
-snip-
Snowman, absolutely buy some for us.
shut up....and take my money pls
Awesome, they look great! I assume you don't number them (on the bars), right?
Pm sent. Really, really cool looking bar, I love the artwork! I hope I can get one!
I know that you can't mention every country for shipping but can us Canadians "ride the coat tails of our American cousins" (like we usually do LOL) for shipping?
I know that you can't mention every country for shipping but can us Canadians "ride the coat tails of our American cousins" (like we usually do LOL) for shipping?
Thanks all. Big shoutout to BTS (bigtimespaghetti) for his invaluable input
Wow awesome bar ! like the design, job well done. send you a pm
Nice job, I’d like to take one
Great job on the design I really like it.
Congratulations on an awesome release AT! This really looks incredible and I can see that you've spent a lot of time working it all out. Super happy for you and I'm glad to see more people entering the creating space here.
I would like one bar please! Sending you a PM!
Helllllooooo all!
I can't believe it! The day has finally arrived! It's been a long time coming, but I am both humbled and delighted to introduce the VaultBar.
This started off as a hobby that soon turned into an actual project which has come to fruition with thanks to a number of members on and off of this forum. Without their help, input and support, I'd have long given up on this project given the multiple failures and setbacks endured throughout.
But, that's not important. Because. Today. It. Is. Ready. And I'm absolutely thrilled!;D
So enough blabber, Here are the deets you want:
Specifications:
Bar dimensions: 5.7 x 10 x 0.8 (cm)
Bar weight: 270g
Material: 24k gold plated alloy
Artwork (Reverse and Obverse): Both sides are similar with subtle changes. The bar features a detailed border around the edges and corners directing the focus of attention to the centre of the image. They are the curtains that set the stage, inviting you to one of the greatest match-ups you have/will ever see. On one side you have the mighty BTC landing a knockout blow to the inferior USD whilst the ETH takes on the EUR in a similar duel.
The crowd can be seen beneath the stage cheering the fighters on whilst the match lineup and stats are shown for each fighter.
The bottom of the bar reads: PLACE YOUR BETS - inviting you to join in on the fun, sit back and watch as history is written.
Hologram: The hologram features an outer border with a number of gears and mechanisms representing security. Around the window that displays the key is a border that represents the digital nature and expanding network of digital currencies. When light catches the hologram from the right angle, you will also be able to make out the words VaultBar with some stacked bars on each side of it.
Details:
Price:$75 $60
Packaging: Foam bag in padded envelope
Holograms: 6 (per bar)
Mintage: Less than 150 (exact number TBC)
Payment: BTC, ETH, LTC, XMR and VIA
Please PM for orders.
Shipping:
Shipping is from the UK.
Shipping costs depend on quantity and location.
For US orders, shipping will be handled by MJ (minerjones) who will calculate individual shipping costs. This will be much more cost-effective (cheaper) for those living across the pond. - After an order is placed, I will ship the bars to MJ who will arrange domestic delivery.
For UK and EU delivery details, please PM for a quote.
Escrow accepted at buyer's cost.
Pics:
https://imgur.com/a/sjgTab6
Please note that due to the nature of the bar (design) and the extent of the manufacturing process involved; no 2 bars are identical. All have some differences in finish/plating. I have looked at each bar individually and removed those that aren't of a high enough standard given the manufacturing process involved. Small bumps/creases are to be expected and add character. This bar is both a piece of art and a showpiece. Whilst some of you may not like to get it grubby/smudged with fingerprints, others would be happy to have this lying on their desk as a conversational piece. In either case, I want you to make it your bar, to enjoy it, and to let it tell its own (and your) story.
I can't believe it! The day has finally arrived! It's been a long time coming, but I am both humbled and delighted to introduce the VaultBar.
This started off as a hobby that soon turned into an actual project which has come to fruition with thanks to a number of members on and off of this forum. Without their help, input and support, I'd have long given up on this project given the multiple failures and setbacks endured throughout.
But, that's not important. Because. Today. It. Is. Ready. And I'm absolutely thrilled!;D
So enough blabber, Here are the deets you want:
Specifications:
Bar dimensions: 5.7 x 10 x 0.8 (cm)
Bar weight: 270g
Material: 24k gold plated alloy
Artwork (Reverse and Obverse): Both sides are similar with subtle changes. The bar features a detailed border around the edges and corners directing the focus of attention to the centre of the image. They are the curtains that set the stage, inviting you to one of the greatest match-ups you have/will ever see. On one side you have the mighty BTC landing a knockout blow to the inferior USD whilst the ETH takes on the EUR in a similar duel.
The crowd can be seen beneath the stage cheering the fighters on whilst the match lineup and stats are shown for each fighter.
The bottom of the bar reads: PLACE YOUR BETS - inviting you to join in on the fun, sit back and watch as history is written.
Hologram: The hologram features an outer border with a number of gears and mechanisms representing security. Around the window that displays the key is a border that represents the digital nature and expanding network of digital currencies. When light catches the hologram from the right angle, you will also be able to make out the words VaultBar with some stacked bars on each side of it.
Details:
Price:
Packaging: Foam bag in padded envelope
Holograms: 6 (per bar)
Mintage: Less than 150 (exact number TBC)
Payment: BTC, ETH, LTC, XMR and VIA
Please PM for orders.
Shipping:
Shipping is from the UK.
Shipping costs depend on quantity and location.
For US orders, shipping will be handled by MJ (minerjones) who will calculate individual shipping costs. This will be much more cost-effective (cheaper) for those living across the pond. - After an order is placed, I will ship the bars to MJ who will arrange domestic delivery.
For UK and EU delivery details, please PM for a quote.
Escrow accepted at buyer's cost.
Pics:
https://imgur.com/a/sjgTab6
Please note that due to the nature of the bar (design) and the extent of the manufacturing process involved; no 2 bars are identical. All have some differences in finish/plating. I have looked at each bar individually and removed those that aren't of a high enough standard given the manufacturing process involved. Small bumps/creases are to be expected and add character. This bar is both a piece of art and a showpiece. Whilst some of you may not like to get it grubby/smudged with fingerprints, others would be happy to have this lying on their desk as a conversational piece. In either case, I want you to make it your bar, to enjoy it, and to let it tell its own (and your) story.
Jump to: