Topic: Announcement: A1 28NM 2TH/S Asic miner 1.05$/G delivery time in 1 days (Read 7001 times)
September 04, 2014, 10:04:20 PM
If you tell me how to make the copy i can do it
September 03, 2014, 11:48:20 PM
I can attest to the quality of the 2th miner and have it running and hashing. The PSUs used are some unknown brand though (as with all A1 miners nowadays)
This is my graph on MRR and it actually overperforms slightly.
Drawbacks is that it's frickin loud and can't work on P2Pool (gets only 1.3-1.5th on P2Pool)
http://youtu.be/tSFEzduops0
So Bit-Winkor isn't a scam company. They are reputable in all my purchases so far and give good support via Amanda. Only thing is that being a smaller vendor, their pricing isn't as good though they really try their best.
One thing I don't like about their miners is that they cut off the fan wires so that it runs at full speed 24/7. Great for farms and cooling but not so good for home use since it's frickin loud all the time.
I also found that in my purchase of LKETC miners and Bit-Winkor miners, that my Bit-Winkor A1 is performing slightly better than the lketc one but it may just be a hardware sampling. The Bit-Winkor A1 is smaller but a lot louder.
As with all A1s, their ssh is locked.
This is my graph on MRR and it actually overperforms slightly.
Drawbacks is that it's frickin loud and can't work on P2Pool (gets only 1.3-1.5th on P2Pool)
http://youtu.be/tSFEzduops0
So Bit-Winkor isn't a scam company. They are reputable in all my purchases so far and give good support via Amanda. Only thing is that being a smaller vendor, their pricing isn't as good though they really try their best.
One thing I don't like about their miners is that they cut off the fan wires so that it runs at full speed 24/7. Great for farms and cooling but not so good for home use since it's frickin loud all the time.
I also found that in my purchase of LKETC miners and Bit-Winkor miners, that my Bit-Winkor A1 is performing slightly better than the lketc one but it may just be a hardware sampling. The Bit-Winkor A1 is smaller but a lot louder.
As with all A1s, their ssh is locked.
Any chance I could get a copy of the factory firmware off you? Tried an image from another bitmine-based miner, but was unsuccessful. Miner came without an SD card. Bit-Winkor is not providing any support at this moment, since I did not purchase directly from them.
September 03, 2014, 10:42:39 PM
I can attest to the quality of the 2th miner and have it running and hashing. The PSUs used are some unknown brand though (as with all A1 miners nowadays)
This is my graph on MRR and it actually overperforms slightly.
Drawbacks is that it's frickin loud and can't work on P2Pool (gets only 1.3-1.5th on P2Pool)
http://youtu.be/tSFEzduops0
So Bit-Winkor isn't a scam company. They are reputable in all my purchases so far and give good support via Amanda. Only thing is that being a smaller vendor, their pricing isn't as good though they really try their best.
One thing I don't like about their miners is that they cut off the fan wires so that it runs at full speed 24/7. Great for farms and cooling but not so good for home use since it's frickin loud all the time.
I also found that in my purchase of LKETC miners and Bit-Winkor miners, that my Bit-Winkor A1 is performing slightly better than the lketc one but it may just be a hardware sampling. The Bit-Winkor A1 is smaller but a lot louder.
As with all A1s, their ssh is locked.
This is my graph on MRR and it actually overperforms slightly.
Drawbacks is that it's frickin loud and can't work on P2Pool (gets only 1.3-1.5th on P2Pool)
http://youtu.be/tSFEzduops0
So Bit-Winkor isn't a scam company. They are reputable in all my purchases so far and give good support via Amanda. Only thing is that being a smaller vendor, their pricing isn't as good though they really try their best.
One thing I don't like about their miners is that they cut off the fan wires so that it runs at full speed 24/7. Great for farms and cooling but not so good for home use since it's frickin loud all the time.
I also found that in my purchase of LKETC miners and Bit-Winkor miners, that my Bit-Winkor A1 is performing slightly better than the lketc one but it may just be a hardware sampling. The Bit-Winkor A1 is smaller but a lot louder.
As with all A1s, their ssh is locked.
September 03, 2014, 11:18:12 AM
Does anyone have a backup image of the firmware for these?
Anyone? My SD card was lost in transit, and have a fancy fan box right now that I would like to get mining. Segree has not co-operated with helping me whatsoever.
There is a link in the 3rd post. This firmware should work as it appears to be using all the same parts to run this. Worst case it simply wont mine and you need an image from the vendor.
https://bitcointalksearch.org/topic/amt-12ths-miner-first-impressionsreview-wip-752116
September 03, 2014, 11:04:54 AM
Does anyone have a backup image of the firmware for these?
Anyone? My SD card was lost in transit, and have a fancy fan box right now that I would like to get mining. Segree has not co-operated with helping me whatsoever.
September 03, 2014, 10:51:07 AM
Your first model claimed 2th/s and failed to comply according to buyer tests.
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
They agreed to send me a unit for $2600 if I make a review for the forum. But when I asked if they would use escrow they quickly denied.
just a warning. these guys are associated with Josh Zipkin - a VERY known and confirmed scam artist from AMT miners. If you want to risk your money, by all means, but you cannot say you were not warned. ill be watching this thread.
Additionally Joshua Zipkin has been also known to try to buy and bribe reviews in the same manner. And even had a recent auction on similar miners go south on him when he got called out. People asked escrow and he had no interest. Just demonstrates the need for the community to remain vigilant for these kinds of sales. Hopefully the Chinese vendor selling these will understand the price of doing business with the famed "loumay" aka Joshua Zipkin
September 03, 2014, 06:52:10 AM
Your first model claimed 2th/s and failed to comply according to buyer tests.
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
They agreed to send me a unit for $2600 if I make a review for the forum. But when I asked if they would use escrow they quickly denied.
just a warning. these guys are associated with Josh Zipkin - a VERY known and confirmed scam artist from AMT miners. If you want to risk your money, by all means, but you cannot say you were not warned. ill be watching this thread.
September 02, 2014, 09:22:12 PM
Segree would need to give some compelling reason as to why these are better.
If the price will be as low as 1300-1400 USD - this will be a reason I think. )Still not worth it at that price. You lose out on the power consumption as well. Not only that but mining density. Would you rather have this massive 8U unit at 2Ths or 4 Antminers running at 1800Ghs ...add a 5th with its own small PSU and you now have a whole shelf that would otherwise by used up by this thing. And for their previous comment. Yes people here are fans of Antminers, because they make them well and are priced just right. Seeing as some already have an AMT version of the 1Ths of this thing one can already be sure the quality will be subpar. You can try to deny it but you are using the EXACT SAME Poor UI, unique IP (which I can see taped and written on the unit pictured), a likley unguessable SSH password, loud fans that require earplugs to get near the miner. Not to mention the random pieces of metal that get shipped with these things. I got some scrap metal with my box...the unit itself was VERY well packed. BUT came with scrap metal. Someone else reported a rusted piece of metal.
Fyi my AMT review thread has a link to how loud these things will likley be. The 1Ths unit compared to an S2. And the video does not do the noise justice.
September 02, 2014, 12:05:28 PM
Google amanda2007520 to learn these guys don't make anything. They're resellers from hawking underwear, knock-off purses, to...wait for it...AMT miners.
September 02, 2014, 11:47:34 AM
Segree would need to give some compelling reason as to why these are better.
If the price will be as low as 1300-1400 USD - this will be a reason I think. ) September 01, 2014, 06:35:13 PM
Why would someone want to buy these over Antminers S3? The consumption on these is insane. 2Ths you are looking at well over 2.2 2.4Kw. Needs two PSUs to power it. You can get 1.8Ths @ 1.4Kw For a little over $1k USD. Sure you get rack mount ability with these. but you are talking about what looks like an 8U machine taking up ALOT of space for only 2Ths at current difficulty. You could easily use a shelf to house the antminers S3s and get more hash power. OR go with a spondoolies SP30/31 (when they start shipping) Again another economical and efficient choise
Segree would need to give some compelling reason as to why these are better. Considering I own an AMT 1Ths version of these designs (as they are made by the same people obviously), the performance will be pretty much the same or on par. And A1 chips have proven to be very power hungry. There is no technical advantage to having these aside from form factor. And the form factor is a minor thing in all this if it does not match up hash power.
Segree would need to give some compelling reason as to why these are better. Considering I own an AMT 1Ths version of these designs (as they are made by the same people obviously), the performance will be pretty much the same or on par. And A1 chips have proven to be very power hungry. There is no technical advantage to having these aside from form factor. And the form factor is a minor thing in all this if it does not match up hash power.
September 01, 2014, 05:53:11 PM
And you'll be releasing the full source code including cgminer source and your driver driver?
Sorry , don't understand your question
He wants the modifications you made to cgminer, in source code form. It's legally required.
September 01, 2014, 02:13:23 PM
Does anyone have a backup image of the firmware for these?
August 13, 2014, 08:50:58 PM
So, I'm thinking about to deal with them.
Ok, May we know how many pcs you plan to order?
I will try a 1 item. If everything will be perfect, like we discussing in PM - I will order much more.
1pcs price is 2150USD/PC. shippig to USA or Canada Shipping cost 170USD/PC.
So totally is 2330USD/PC with UPS or DHL. 3 Working days reach
August 12, 2014, 10:55:43 PM
So, I'm thinking about to deal with them.
Ok, May we know how many pcs you plan to order?
I will try a 1 item. If everything will be perfect, like we discussing in PM - I will order much more.
August 12, 2014, 09:06:14 PM
So, I'm thinking about to deal with them.
Ok, May we know how many pcs you plan to order?
August 12, 2014, 02:56:19 PM
So, I'm thinking about to deal with them.
August 12, 2014, 02:50:42 PM
Here is what I've got from user - xrobau
Quote
They sent me a 6-avalon3 box, with 2 PSUs. They forgot the Pi, but promised to send it again, or, give me a refund of it. 6 Avalon3's, however, is 1.8TH, not 2TH.
They seem honest, if a bit unsure about what they're doing.
Their new box looks crazy though. I don't know how they're planning on having people buy it, with fans all over it like that.
They seem honest, if a bit unsure about what they're doing.
Their new box looks crazy though. I don't know how they're planning on having people buy it, with fans all over it like that.
August 07, 2014, 10:00:32 PM
Hi everyone!
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
I have bought a 2TH miner from this guys. I was massively unimpressed with the hardware, which was damaged in transit, underspecced, and used much more power than originally stated.
So yes, they exist. They do actually send hardware out. Check my profile history for photos of what arrived.
Can you give me a link to you tread with review?
August 03, 2014, 10:00:03 PM
Hi everyone!
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
I have bought a 2TH miner from this guys. I was massively unimpressed with the hardware, which was damaged in transit, underspecced, and used much more power than originally stated.
So yes, they exist. They do actually send hardware out. Check my profile history for photos of what arrived.
Thanks for the review...
August 03, 2014, 05:57:50 PM
Hi everyone!
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
I have bought a 2TH miner from this guys. I was massively unimpressed with the hardware, which was damaged in transit, underspecced, and used much more power than originally stated.
So yes, they exist. They do actually send hardware out. Check my profile history for photos of what arrived.
August 03, 2014, 12:15:18 PM
Hi everyone!
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
IS ANYBODY from REAL Members of this FORUM bought this miners?
Is it scam or this company are real? Is it can be trusted?
July 30, 2014, 06:36:51 AM
And you'll be releasing the full source code including cgminer source and your driver driver?
Sorry , don't understand your question
Your miner is using cgminer software right? cgminer is licensed under GPL v3.
If your selling these miners with cgminer (GPLv3) on them you must make the source code available for download - including your modifications - or you're in breach of that license.
And I know that probably deeply concerns you - as much as it has concerned any of the other Bitmine A1 based manufacturers...
I tend to think that the source code is in Innosilicon's hands, and that it's never got out in the wild and this miner appears does nothing to change that as it's little more than the reference design - pushed to a ridiculous level of OC in a box with more power and more fans.
You know what though: I'll buy one (or more) if you do post the complete source code (including your modifications if any) and driver for cgminer Otherwise no thanks.
July 30, 2014, 01:24:38 AM
the issue is 2700usd for 2 th at 2000 watts. plus shipping.
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
1. Our 2T is full unit . will PSU. buyer only can connect and begin mining.
S3 without power supply.
2. We have update price . Wholeseller 2280USD/PC. big quantity can cotact us for discuss.
what sort of power supply is used? for the power draw it would hopefully be 80+ GOLD or better.
even the wholesale price before shipping is no better than bitmain, since it does not include shipping, and requires an extra 300W (~$30/month) power draw. <$2200 shipped and you might have a sale.
even with your unit being easy to setup, so are the antminers, which are a breeze using the S3
I think you are antminer fans.
2200$ no problem if you take 100pcs more.
We are only unit 2T. i think more convinient than you use 5pcs Antminer and go to purchase PSU. we are in different strategy with antminer. So antminer have antminer buyer. we have other buyer. No problem.
I think you are greedy, illogical, money, money, money fans...
ignore competitors, there must be some fools out there willing to pay more for dusty rigs than they are worth or will EVER earn...
Yes, i'm convinced you are greedy, illogical, money, money, money 'strategy' fans...
WOW!! u have 2Th miners, will you accept 3500USD for a dusty sample??
OF COURSE YOU WILL, SHORT-SIGHTED & NARROW-MINDED GREED is the breakfast of chumpions
You are not right to Judge this. you are not really buyer. Different solution different cost. I don't think we need spend our time on this kindly of none diathesis guy
July 30, 2014, 01:19:03 AM
July 30, 2014, 01:17:49 AM
And you'll be releasing the full source code including cgminer source and your driver driver?
Sorry , don't understand your question
July 30, 2014, 12:12:42 AM
And you'll be releasing the full source code including cgminer source and your driver driver?
July 29, 2014, 10:11:56 PM
I have talked to Amanda over the phone when I was in The Netherlands and I have visited their office and factory multiple times in person in Shenzhen.
I can asure you that they those miners to sell.
I can asure you that they those miners to sell.
So why than seller doesn't want an escrow? All forum works like this. It's very suspicious.
Did anybody bought miners from this seller?
bit-wizard and Ronin_SV and Esayzmine member have bougt miner from us and get our miner now. you can check with them.
July 29, 2014, 04:33:19 PM
I have talked to Amanda over the phone when I was in The Netherlands and I have visited their office and factory multiple times in person in Shenzhen.
I can asure you that they those miners to sell.
I can asure you that they those miners to sell.
So why than seller doesn't want an escrow? All forum works like this. It's very suspicious.
Did anybody bought miners from this seller?
July 29, 2014, 12:16:21 AM
I have talked to Amanda over the phone when I was in The Netherlands and I have visited their office and factory multiple times in person in Shenzhen.
I can asure you that they those miners to sell.
I can asure you that they those miners to sell.
Hi, David,
We have 1T and 2T miner in good price. may we know you buying miner now or not?
July 28, 2014, 11:49:43 PM
I have talked to Amanda over the phone when I was in The Netherlands and I have visited their office and factory multiple times in person in Shenzhen.
I can asure you that they those miners to sell.
I can asure you that they those miners to sell.
July 28, 2014, 10:20:24 PM
Looks very fishy.
The seller is not accepting escrow.
Payment method - BTC and bank transfer only.
Is anybody from full members, or more respectable members on this forum bought miners from this seller?
The seller is not accepting escrow.
Payment method - BTC and bank transfer only.
Is anybody from full members, or more respectable members on this forum bought miners from this seller?
July 28, 2014, 08:11:55 AM
Just to say that I managed to get an old first gen Coincraft A1 miner from them. Had some shipping issues (probably not their fault) as it was held at customs in China while en-route to Hong Kong but they seem eager to rectify the issue and because of the delay are willing to offer me a discount on my second miner.
Miner arrived very well packed with lots of additional padding and Amanda has been very helpful.
Miner arrived very well packed with lots of additional padding and Amanda has been very helpful.
Good to know.
July 28, 2014, 01:38:07 AM
Just to say that I managed to get an old first gen Coincraft A1 miner from them. Had some shipping issues (probably not their fault) as it was held at customs in China while en-route to Hong Kong but they seem eager to rectify the issue and because of the delay are willing to offer me a discount on my second miner.
Miner arrived very well packed with lots of additional padding and Amanda has been very helpful.
Miner arrived very well packed with lots of additional padding and Amanda has been very helpful.
July 27, 2014, 08:32:55 PM
the issue is 2700usd for 2 th at 2000 watts. plus shipping.
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
1. Our 2T is full unit . will PSU. buyer only can connect and begin mining.
S3 without power supply.
2. We have update price . Wholeseller 2280USD/PC. big quantity can cotact us for discuss.
what sort of power supply is used? for the power draw it would hopefully be 80+ GOLD or better.
even the wholesale price before shipping is no better than bitmain, since it does not include shipping, and requires an extra 300W (~$30/month) power draw. <$2200 shipped and you might have a sale.
even with your unit being easy to setup, so are the antminers, which are a breeze using the S3
I think you are antminer fans.
2200$ no problem if you take 100pcs more.
We are only unit 2T. i think more convinient than you use 5pcs Antminer and go to purchase PSU. we are in different strategy with antminer. So antminer have antminer buyer. we have other buyer. No problem.
July 27, 2014, 08:29:23 PM
price down please
depend on quantity . we can talk in skype: amanda2007520
July 26, 2014, 12:06:30 PM
price down please
July 26, 2014, 11:41:18 AM
the issue is 2700usd for 2 th at 2000 watts. plus shipping.
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
1. Our 2T is full unit . will PSU. buyer only can connect and begin mining.
S3 without power supply.
2. We have update price . Wholeseller 2280USD/PC. big quantity can cotact us for discuss.
what sort of power supply is used? for the power draw it would hopefully be 80+ GOLD or better.
even the wholesale price before shipping is no better than bitmain, since it does not include shipping, and requires an extra 300W (~$30/month) power draw. <$2200 shipped and you might have a sale.
even with your unit being easy to setup, so are the antminers, which are a breeze using the S3
July 26, 2014, 05:17:21 AM
sorry
July 26, 2014, 01:52:23 AM
How much for those sandals? They look soo comfy.
2700USD/PC for sample
2600USD/pc for more pcs.
Shipping no include
oic. excellent. well. I would want two...
do you sell any other gear? i mean, Asics?
hi , we have update price and have begin mass producion.
Have stock ready for shipping
July 26, 2014, 01:47:30 AM
the issue is 2700usd for 2 th at 2000 watts. plus shipping.
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
1. Our 2T is full unit . will PSU. buyer only can connect and begin mining.
S3 without power supply.
2. We have update price . Wholeseller 2280USD/PC. big quantity can cotact us for discuss.
July 25, 2014, 10:20:42 AM
the issue is 2700usd for 2 th at 2000 watts. plus shipping.
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
I buy 5x s-3's for 3.25 btc that is 2.2th
3.25 btc is 1950 usd
1950 usd for the miners
350 usd for 2 evga 1300 psu's
2300 usd add on 50 bucks for cables and a gigabyte switch
One A1 vs Five s-3's
I am at 2700 usd + pay to ship vs 2350 usd + free shipping
this hashes at 2.0th vs 2.2th
this spends 2000 watts vs 1700 watts
Simply does not compete with the s-3
July 25, 2014, 08:13:16 AM
Your first model claimed 2th/s and failed to comply according to buyer tests.
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
They agreed to send me a unit for $2600 if I make a review for the forum. But when I asked if they would use escrow they quickly denied.
May we know have your got the miner and begin the testing?
I'm sorry I thought I was clear by wanting to use an escrow and you did not. I don't want to pay the 4.4% - 5% PayPal charges, nor do I use that service. I like buyer protection, but I don't think I should have to pay for it.
July 23, 2014, 08:51:42 PM
Your first model claimed 2th/s and failed to comply according to buyer tests.
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
They agreed to send me a unit for $2600 if I make a review for the forum. But when I asked if they would use escrow they quickly denied.
May we know have your got the miner and begin the testing?
July 15, 2014, 09:43:54 AM
I purchased one of their old Coincraft machines. Will keep you posted as to how reliable they are 
Reuben
Reuben
July 15, 2014, 08:50:58 AM
I would love to know who and how they fabricate these cases .
July 15, 2014, 08:41:42 AM
Your first model claimed 2th/s and failed to comply according to buyer tests.
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
They agreed to send me a unit for $2600 if I make a review for the forum. But when I asked if they would use escrow they quickly denied.
July 15, 2014, 12:56:03 AM
Your first model claimed 2th/s and failed to comply according to buyer tests.
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
Now you mention this one is 2 th/s you must sent to a reputable member to test it
then you will be able to sell more.
2700+shipping as mentioned previously its so hard to roi when with 1500 more you can purchase
a Spondoolies that has 3 times the advertised hash with the well known SP10 quality product.
We all want to make a Mercedes but only few make to build it...
As buyers we need high quality and low prices
Also important to all chinese manufacturers that read this post
If you want to make money with bitcoin in long term, pass the mining to the masses
otherwise you mine with your own equipment and finally fuck bitcoin.
A good example is LKETC very good product but expensive, they have only sold 5 miners since first of June...
They keep taking price down but not donw enought...
so stock remains the same .....
ALSO WOULD NOT MIND TO TAKE A WHITE SHEET OR RED TABLECLOTH PUT YOUR MINER ON IT
AND MAKE SOME HIGH QUALITY PHOTOS ALONG WITH THE HASH RATE WITH UPTIME MORE THAN A WEEK.
RENT A PROFECIONAL ITS INTERNATIONAL MARKET YOU HIT
July 15, 2014, 12:24:53 AM
not a good offer compare to others 
This is for first sample order.
Mass order will have discount.
July 14, 2014, 09:09:09 PM
not a good offer compare to others
July 14, 2014, 07:55:09 PM
those things will never ROI at that price
I can buy 3 if you sell them for 1800 USD piece with shipment included.
[/quoten]
If we can sell in 1800USD. why offer 2700USD.
Too make more money I can buy 3 if you sell them for 1800 USD piece with shipment included.
[/quoten]
If we can sell in 1800USD. why offer 2700USD.
Bitcoin miner now is very lower benifit. no like you thought can make 900USD benifit
July 14, 2014, 09:55:31 AM
those things will never ROI at that price
I can buy 3 if you sell them for 1800 USD piece with shipment included.
[/quoten]
If we can sell in 1800USD. why offer 2700USD.
Too make more money I can buy 3 if you sell them for 1800 USD piece with shipment included.
[/quoten]
If we can sell in 1800USD. why offer 2700USD.
July 14, 2014, 04:38:02 AM
those things will never ROI at that price
I can buy 3 if you sell them for 1800 USD piece with shipment included.
[/quoten]
If we can sell in 1800USD. why offer 2700USD.
I can buy 3 if you sell them for 1800 USD piece with shipment included.
[/quoten]
If we can sell in 1800USD. why offer 2700USD.
July 11, 2014, 10:19:36 AM
The air flow design is really weird, how does it work?
Hard to tell from the pic, but airflow in the back of the foot shouldn't be an issue, and the holes toward the front of the foot should help keep it cool.
July 11, 2014, 10:18:46 AM
those things will never ROI at that price
I can buy 3 if you sell them for 1800 USD piece with shipment included.
I can buy 3 if you sell them for 1800 USD piece with shipment included.
July 11, 2014, 09:24:29 AM
The air flow design is really weird, how does it work?
July 11, 2014, 08:57:28 AM
How much for those sandals? They look soo comfy.
2700USD/PC for sample
2600USD/pc for more pcs.
Shipping no include
oic. excellent. well. I would want two...
do you sell any other gear? i mean, Asics?
Ok, 2pcs is no problem. May we know ship to which market?
I will check shipping cost for you first.
Yes. We have others. have Asic scrypt miner also. pls view our website: www.bit-winkor.com
https://www.google.co.uk/maps/place/Trolliloes,+Hailsham,+East+Sussex+BN27/@50.9091715,0.313522,15z/data=!3m1!4b1!4m2!3m1!1s0x47df6c67a17aa015:0x66dd181c7584b409?hl=en
I live in East Sussex
Would you inform you the post code. I have ask DHL and forwarder check EAST Sussex, they can not check the exactly shipping cost . need the post code
July 11, 2014, 04:18:10 AM
How much for those sandals? They look soo comfy.
2700USD/PC for sample
2600USD/pc for more pcs.
Shipping no include
oic. excellent. well. I would want two...
do you sell any other gear? i mean, Asics?
Ok, 2pcs is no problem. May we know ship to which market?
I will check shipping cost for you first.
Yes. We have others. have Asic scrypt miner also. pls view our website: www.bit-winkor.com
https://www.google.co.uk/maps/place/Trolliloes,+Hailsham,+East+Sussex+BN27/@50.9091715,0.313522,15z/data=!3m1!4b1!4m2!3m1!1s0x47df6c67a17aa015:0x66dd181c7584b409?hl=en
I live in East Sussex
July 11, 2014, 03:39:41 AM
How much for those sandals? They look soo comfy.
2700USD/PC for sample
2600USD/pc for more pcs.
Shipping no include
oic. excellent. well. I would want two...
do you sell any other gear? i mean, Asics?
Ok, 2pcs is no problem. May we know ship to which market?
I will check shipping cost for you first.
Yes. We have others. have Asic scrypt miner also. pls view our website: www.bit-winkor.com
July 11, 2014, 03:33:03 AM
How much for those sandals? They look soo comfy.
2700USD/PC for sample
2600USD/pc for more pcs.
Shipping no include
oic. excellent. well. I would want two...
do you sell any other gear? i mean, Asics?
July 11, 2014, 03:26:22 AM
How much for those sandals? They look soo comfy.
2400USD/PC for sample
Shipping no include
July 11, 2014, 03:25:37 AM
Wow, no improvements to offer except more hash at an inefficient W/GHs.
Nothing to see here folks. Move along.
Nothing to see here folks. Move along.
At least it is saving some shipping cost than 2pcs A1 1TH/S
July 11, 2014, 02:25:11 AM
How much for those sandals? They look soo comfy.
July 11, 2014, 02:15:16 AM
Wow, no improvements to offer except more hash at an inefficient W/GHs.
Nothing to see here folks. Move along.
Nothing to see here folks. Move along.
July 11, 2014, 01:54:53 AM
Here is our update price for 2TH/S A1 28nm Asic bitcoin miner.
Retail: 2150USD/PC (full set, already include PSU)
Agency and Wholesales: pls contact [email protected] , Skype: amanda2007520 to get good discount
www.bit-winkor.com
We have made mass production. quality is much steady than A1 1TH/S. Attache Mass Stock photo:
Announcement:
We Segree Digital have developed new 2TH/S A1 28NM miner. and first sample is coming out.
It is basic on A1 1TH/S. still 4 blades, but each blades add 8pcs chip on it.
Specification:
Full 2TH/S
4 blades with 64pcs A1 28NM CHIP.
Power comsuption: 2000W
build in 2pcs 1000W power supply.
1*raspberry
1*SD card
Weight: 25KG
Size: L37*W23*H49CM
Photo:
Price and Delivery
Payment:
A. by Bank transfer:
Beneficiary Bank Name: HSBC Hong Kong
Bank code: 004(optional)
Bank address: 1 Queen’s Road Central,Hong Kong
Swift Code: HSBCHKHHHKH
Beneficiary Name: SEGREE DIGITAL TECHNOLOGY CO LIMITED
Beneficiary Account Number: 561-864497-838
B. By bitcion:
C. sample by paypal. add 4.4% of totally cost
How to contact us:
Skype: amanda2007520
Email: [email protected]
Website: http://www.bit-winkor.com/
Retail: 2150USD/PC (full set, already include PSU)
Agency and Wholesales: pls contact [email protected] , Skype: amanda2007520 to get good discount
www.bit-winkor.com
We have made mass production. quality is much steady than A1 1TH/S. Attache Mass Stock photo:
Announcement:
We Segree Digital have developed new 2TH/S A1 28NM miner. and first sample is coming out.
It is basic on A1 1TH/S. still 4 blades, but each blades add 8pcs chip on it.
Specification:
Full 2TH/S
4 blades with 64pcs A1 28NM CHIP.
Power comsuption: 2000W
build in 2pcs 1000W power supply.
1*raspberry
1*SD card
Weight: 25KG
Size: L37*W23*H49CM
Photo:
Price and Delivery
Payment:
A. by Bank transfer:
Beneficiary Bank Name: HSBC Hong Kong
Bank code: 004(optional)
Bank address: 1 Queen’s Road Central,Hong Kong
Swift Code: HSBCHKHHHKH
Beneficiary Name: SEGREE DIGITAL TECHNOLOGY CO LIMITED
Beneficiary Account Number: 561-864497-838
B. By bitcion:
C. sample by paypal. add 4.4% of totally cost
How to contact us:
Skype: amanda2007520
Email: [email protected]
Website: http://www.bit-winkor.com/
Jump to: