Topic: [ANN][P2Pool] Check Out P2Pool.org - 30 coins and counting! (Read 7415 times)
Ok cool. I think on VTC you might be solo as well, if you want to double check it.
I notice your UNO node is running solo and not connected to the rest of the p2pool network. Is that intentional?
Hello,
No, not really.
I probably had my own going prior to someone releasing an updated P2Pool for it.
I will update it soon.
I notice your UNO node is running solo and not connected to the rest of the p2pool network. Is that intentional?
P2Pool just added to my mining pools database
Good luck, miners.
Good luck, miners.
your vertcoin p2pool at p2pool.org is out of date.
p2pool-vtc software got updated last week, see https://github.com/donSchoe/p2pool-vtc
p2pool-vtc software got updated last week, see https://github.com/donSchoe/p2pool-vtc
Cool. Want you to have happy users. 
If you check the front page of the website you will see it says to use your public key.
This is not your address, your public key. You can get this by opening your client and going to console and running getnewpubkey p2pool, this will spit out a string, use that as your username.
This is not your address, your public key. You can get this by opening your client and going to console and running getnewpubkey p2pool, this will spit out a string, use that as your username.
The big paragraph at top says "Using your payment address as the username and any password". I realize it says to use public key for 2 of the coins down lower in the page, but people might not actually go down there and look. They might just read this top instruction, click the coin at top of menu bar, and then be mining wrongly. (Looks like 3-4 on your node are using invalid addresses atm.)
I'd suggest changing the top spot to read:
Using your payment address (for most coins, some require public key instead, please see blow) as the username and any password.
And on the rare coins that need public key, putting a notice on the top of those specific node pages too.
I will change it to say check the details on the coin below or something to that extent and I will put more information on the site also.
If you check the front page of the website you will see it says to use your public key.
This is not your address, your public key. You can get this by opening your client and going to console and running getnewpubkey p2pool, this will spit out a string, use that as your username.
This is not your address, your public key. You can get this by opening your client and going to console and running getnewpubkey p2pool, this will spit out a string, use that as your username.
The big paragraph at top says "Using your payment address as the username and any password". I realize it says to use public key for 2 of the coins down lower in the page, but people might not actually go down there and look. They might just read this top instruction, click the coin at top of menu bar, and then be mining wrongly. (Looks like 3-4 on your node are using invalid addresses atm.)
I'd suggest changing the top spot to read:
Using your payment address (for most coins, some require public key instead, please see blow) as the username and any password.
And on the rare coins that need public key, putting a notice on the top of those specific node pages too.
Hello. I have a problem. two pictures. one of them - my mining. next - another player ...
why is there such a difference? and where's my money?
why is there such a difference? and where's my money?
I didn't know you were mining money.
If you check the front page of the website you will see it says to use your public key.
This is not your address, your public key. You can get this by opening your client and going to console and running getnewpubkey p2pool, this will spit out a string, use that as your username.
That is why you have not received a payout in ALTCOINS, not money.
I don't have a pool for money, yet.
I do have a pool for CASH tho.
Hello. I have a problem. two pictures. one of them - my mining. next - another player ...
why is there such a difference? and where's my money?
http://img-fotki.yandex.ru/get/9748/110724836.f/0_df61a_dac0e9a_XL.png
http://img-fotki.yandex.ru/get/9754/110724836.f/0_df619_76720919_XL.png
why is there such a difference? and where's my money?
http://img-fotki.yandex.ru/get/9748/110724836.f/0_df61a_dac0e9a_XL.png
http://img-fotki.yandex.ru/get/9754/110724836.f/0_df619_76720919_XL.png
Thanks for adding Gamecoin (GME)
Please update in OP as well
It doesn't show GME link on p2pool.org homepage. Will you update the site homepage as well?
Please update in OP as well
It doesn't show GME link on p2pool.org homepage. Will you update the site homepage as well?
Hello, no problem!
I will add it all later tonight.
Happy Mining!
Thanks for adding Gamecoin (GME)
Please update in OP as well
It doesn't show GME link on p2pool.org homepage. Will you update the site homepage as well?
Please update in OP as well
It doesn't show GME link on p2pool.org homepage. Will you update the site homepage as well?
Server is currently down.
Host null routed the IP due to DDOS attack.
Should be back up soon.
Sorry for the down time!
Host null routed the IP due to DDOS attack.
Should be back up soon.
Sorry for the down time!
Server has been rebooted and upgraded.
If anyone would like to chat join the Freenode IRC Channel #p2pool-org
Happy Mining!
If anyone would like to chat join the Freenode IRC Channel #p2pool-org
Happy Mining!
I will be rebooting the server within the next 20 minutes.
I have some upgrades to perform and other regular maintenance.
Sorry for the down time.
I have some upgrades to perform and other regular maintenance.
Sorry for the down time.
Hi thanks for your continuing help with this and sticking with my problem!
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
Quote
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
The issue you are having is you aren't submitting any shares.
See on GUIMiner where it says accepted, it says 0.
You technically aren't mining if you aren't submitting shares.
I personally don't use any of the GUIMiner garbage but I believe you have to put --scrypt in the Extra Flags box.
I have no problem helping people out at all, with out all you precious miners P2Pool.org is useless.
I highly recommend you use a different miner like BFGMiner since CGMiner is discontinuing Scrypt support.
If you need assistance with setting up BFGMiner you can post here or PM me.
> I just re-started the miner, that's why it says 0 share there. There were accepted shares.
I had no problems with GUI Miner Frontend the last 3 years, I started mining with it in 2009. As I said there were many submitted shares, the screenshot is something I took after re-starting mining, after a computer reboot, it is just an example screenshot and not something to base debugging and troubleshooting upon. Can you please check these addresses DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD and DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h and if there are any shares submitted on these adresses.
Thanks for the tip with BFGMiner, I might even check it out, however I am mining into Multipool, Poolerino and many others without any problems with GUIMiner frontend (it is a just a GUI to CGMiner!!)
I don't know what to tell you.
Nobody else has had issues getting paid out from the DOGE pool.
PM me.
Hi thanks for your continuing help with this and sticking with my problem!
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
Quote
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
The issue you are having is you aren't submitting any shares.
See on GUIMiner where it says accepted, it says 0.
You technically aren't mining if you aren't submitting shares.
I personally don't use any of the GUIMiner garbage but I believe you have to put --scrypt in the Extra Flags box.
I have no problem helping people out at all, with out all you precious miners P2Pool.org is useless.
I highly recommend you use a different miner like BFGMiner since CGMiner is discontinuing Scrypt support.
If you need assistance with setting up BFGMiner you can post here or PM me.
> I just re-started the miner, that's why it says 0 share there. There were accepted shares.
I had no problems with GUI Miner Frontend the last 3 years, I started mining with it in 2009. As I said there were many submitted shares, the screenshot is something I took after re-starting mining, after a computer reboot, it is just an example screenshot and not something to base debugging and troubleshooting upon. Can you please check these addresses DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD and DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h and if there are any shares submitted on these adresses.
Thanks for the tip with BFGMiner, I might even check it out, however I am mining into Multipool, Poolerino and many others without any problems with GUIMiner frontend (it is a just a GUI to CGMiner!!)
jude,
i'm curious about something. i know when i used to run my p2pool, i'd have, say, 2 or 3 real miners, and about 90 random people on it every day, half with invalid addresses.
do ports ppl were using that left ever close for you? or it may have just been because they still had me as a backup pool? eventually the whole 1000's of sockets being used, i couldnt do anything else (and i had firewall set to max 3 connections as well)
i'm curious about something. i know when i used to run my p2pool, i'd have, say, 2 or 3 real miners, and about 90 random people on it every day, half with invalid addresses.
do ports ppl were using that left ever close for you? or it may have just been because they still had me as a backup pool? eventually the whole 1000's of sockets being used, i couldnt do anything else (and i had firewall set to max 3 connections as well)
I don't really monitor the connections.
I am re-active when it comes to stuff like that, kind of that "If it isn't broke don't fix it" mentality, lol.
By invalid addresses do you mean just random characters?
And I could see if they still had your pool in their miner it would still check for block changes and still hold a connection, so that could be.
I see a lot of goofy stuff happen when people "mine" with the wrong algorithm.
You would be amazed how many emails I get a month from people complaining that they have had their ASIC mining Litecoin for a week and still haven't received payout, lol.
Anyways, Merry Christmas!
Whn i point my miner to the tigercoin pool, i do not get listed in the graphs and also i wont get paid a coin. Why is this? I use my wallet as username and 10 times checked the pools address. Nothing happens.
Any idea?
Any idea?
Hello,
Sorry for the delayed response, been busy with the holidaze.
Could I see your miner configuration?
We will start there.
jude,
i'm curious about something. i know when i used to run my p2pool, i'd have, say, 2 or 3 real miners, and about 90 random people on it every day, half with invalid addresses.
do ports ppl were using that left ever close for you? or it may have just been because they still had me as a backup pool? eventually the whole 1000's of sockets being used, i couldnt do anything else (and i had firewall set to max 3 connections as well)
i'm curious about something. i know when i used to run my p2pool, i'd have, say, 2 or 3 real miners, and about 90 random people on it every day, half with invalid addresses.
do ports ppl were using that left ever close for you? or it may have just been because they still had me as a backup pool? eventually the whole 1000's of sockets being used, i couldnt do anything else (and i had firewall set to max 3 connections as well)
Whn i point my miner to the tigercoin pool, i do not get listed in the graphs and also i wont get paid a coin. Why is this? I use my wallet as username and 10 times checked the pools address. Nothing happens.
Any idea?
Any idea?
Hi thanks for your continuing help with this and sticking with my problem!
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
Quote
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
The issue you are having is you aren't submitting any shares.
See on GUIMiner where it says accepted, it says 0.
You technically aren't mining if you aren't submitting shares.
I personally don't use any of the GUIMiner garbage but I believe you have to put --scrypt in the Extra Flags box.
I have no problem helping people out at all, with out all you precious miners P2Pool.org is useless.
I highly recommend you use a different miner like BFGMiner since CGMiner is discontinuing Scrypt support.
If you need assistance with setting up BFGMiner you can post here or PM me.
Hi thanks for your continuing help with this and sticking with my problem!
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.
Here's the screenshot:
As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.
The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)
Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?
Quote
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart
Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?
Are you using an address from the client on your computer as the username or from an exchange?
And also, if you were mining in MH/s you were most likely mining with the wrong algorithm.
If you are using the SHA256 algorithm to mine then that would explain why you haven't gotten paid and haven't shown up on the payout list.
Not trying to be rude or anything like that but I don't think I would have over 100Mh/s on my pool if it wasn't paying out.
Hi, thanks for your fast reply, much appreciado.
- Adress from my Client on my PC
- I am mining 1MH/s as in 1000 KH/s = Correct algorithm, just applied mathematics at work.
- I am NOT using SHA256, I am using Scrypt as posted earlier
The problem is not with me, the problem is with the pool, maybe orphan block, no block or else? In 6h no no income in DogeCoin, this is bad news. No possibility to research. The pool web site is like a white paper, no info, no stats, no nothing. Please advise how I can get my money. It is mine, shares were submitted, electrity used, GPU 100%, Proof of Work.
I am confused, are you mining with 700MH/s or 1MH/s?
The first time you said 700 MH/s now it's 1MH/s.
I don't see your address anywhere in the logs for the pool.
You had to have been doing something wrong, I am sorry to say.
The only way your address wouldn't show up is if you weren't submitting any shares.
Can you please post a screen shot of your GUIMiner setup? And what video card are you using to mine?
Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?
Are you using an address from the client on your computer as the username or from an exchange?
And also, if you were mining in MH/s you were most likely mining with the wrong algorithm.
If you are using the SHA256 algorithm to mine then that would explain why you haven't gotten paid and haven't shown up on the payout list.
Not trying to be rude or anything like that but I don't think I would have over 100Mh/s on my pool if it wasn't paying out.
Hi, thanks for your fast reply, much appreciado.
- Adress from my Client on my PC
- I am mining 1MH/s as in 1000 KH/s = Correct algorithm, just applied mathematics at work.
- I am NOT using SHA256, I am using Scrypt as posted earlier
The problem is not with me, the problem is with the pool, maybe orphan block, no block or else? In 6h no no income in DogeCoin, this is bad news. No possibility to research. The pool web site is like a white paper, no info, no stats, no nothing. Please advise how I can get my money. It is mine, shares were submitted, electrity used, GPU 100%, Proof of Work.
Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?
Are you using an address from the client on your computer as the username or from an exchange?
And also, if you were mining in MH/s you were most likely mining with the wrong algorithm.
If you are using the SHA256 algorithm to mine then that would explain why you haven't gotten paid and haven't shown up on the payout list.
Not trying to be rude or anything like that but I don't think I would have over 100Mh/s on my pool if it wasn't paying out.
Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?
I'm mining for 12h+ into p2pool.iorg (doge) I have not received 1 single doge, could you please investigate or clarify how I can investigate? Dis my address - DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h
Much appreciated!
Much appreciated!
What is your hash rate?
Can I see the command you are using to mine?
I'm mining for 12h+ into p2pool.iorg (doge) I have not received 1 single doge, could you please investigate or clarify how I can investigate? Dis my address - DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h
Much appreciated!
Much appreciated!
Next 3 = PHS, GLX, GLC? 
I have to find someone who can make those for me.
I would love to add them.
I just don't have the abilities.
I tried adding GalaxyCoin but the client crashes and has an alert message stating it is out of data.
GlobalCoin I can take a look at.
What is PHS based off of?
I might be able to make it work.
According to this http://com-http.us/ccdir/phs , PHS is a fork of Diamond coin, so that might be trouble too.
EDIT:[URL] is being lame so copy pasta
Updating the Litecoin client for P2Pool.org!
Compiling then switching over.
Sorry for the down time if any.
*UPGRADE COMPLETE*
P2Pool.org is now using the latest version of Litecoind.
Compiling then switching over.
Sorry for the down time if any.
*UPGRADE COMPLETE*
P2Pool.org is now using the latest version of Litecoind.
Next 3 = PHS, GLX, GLC?
I have to find someone who can make those for me.
I would love to add them.
I just don't have the abilities.
I tried adding GalaxyCoin but the client crashes and has an alert message stating it is out of data.
GlobalCoin I can take a look at.
What is PHS based off of?
I might be able to make it work.
Next 3 = PHS, GLX, GLC?
There are now block explorers for all of the coins on P2Pool.org!
To view the block explorer of a certain coin just go to this URL and replace with the 3 letter abbreviation in capitals of the coin you want:
http://p2pool.org//BlockCrawler/index.php
For example you want to view the Quarkcoin block explorer you would go here:
http://p2pool.org/QRK/BlockCrawler/index.php
I will be integrating the explorers into P2Pool and also into the stats page under an Explorer tab.
Happy Mining!
To view the block explorer of a certain coin just go to this URL and replace
http://p2pool.org/
For example you want to view the Quarkcoin block explorer you would go here:
http://p2pool.org/QRK/BlockCrawler/index.php
I will be integrating the explorers into P2Pool and also into the stats page under an Explorer tab.
Happy Mining!
Seem to be having a lot of trouble with GDC, can't connect, any news on that front?
I give up on Grandcoin for now.
Every time P2Pool submits a block to the client it kills the client and P2Pool can't get more work.
I will continue to look for a solution to this issue.
Seems everyone is having the same trouble with GDC... From another pool:
"Warning: There is ongoing problems with communication between stratum and the Grandcoin client which is causing intermittent errors submitting some found blocks to the Grandcoin client. The issue can be seen here:
https://github.com/moopless/stratum-mining-litecoin/issues/48
If you continue to mine Grandcoin on this pool, please take these issues into consideration. We will be trying to find a solution over the coming days."
Seem to be having a lot of trouble with GDC, can't connect, any news on that front?
I give up on Grandcoin for now.
Every time P2Pool submits a block to the client it kills the client and P2Pool can't get more work.
I will continue to look for a solution to this issue.
Seem to be having a lot of trouble with GDC, can't connect, any news on that front?
hello,
I never mined with a p2pool..
do I need the wallet fully synched before starting to mine?
I never mined with a p2pool..
do I need the wallet fully synched before starting to mine?
No, you can start mining right away with the address generated by your wallet, and your coins will come in as they are seen on the blockchain
EDIT: So, you can mine before the sync is done, but your coins just won't show up until fully synced. You won't hurt anything or miss out on coin by mining before that tho. Hope that clarifies a little.
hello,
I never mined with a p2pool..
do I need the wallet fully synched before starting to mine?
I never mined with a p2pool..
do I need the wallet fully synched before starting to mine?
GDC down?
Any ideas why we're getting so many work restarts on SPT stratum? I'm not seeing nearly as many blocks come through as work restarts, and accepted shares seem sporadic
http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz
You need to make your share diff smaller.
Append this to your wallet address in your miner: +0.00058207
So your command would look like:
miner --scrypt -o p2pool.org:9775 -u MFdqEmmo8a6mT6a8WjMb2BmKaQPrFx2PK6+0.00058207 -p spt
Keep adjusting that until you find a steady setting.
I will be adding these details and a better explanation to the site soon.
Perhaps I can make a calculator for it so it's easier for the end user.
Sweet! Thanks for the info! Calculator would be awesome! I'll be sending donation as soon as I break even on these cards. I'm making almost twice as much with you as I was with multipools, so totally worth it
Any ideas why we're getting so many work restarts on SPT stratum? I'm not seeing nearly as many blocks come through as work restarts, and accepted shares seem sporadic
http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz
You need to make your share diff smaller.
Append this to your wallet address in your miner: +0.00058207
So your command would look like:
miner --scrypt -o p2pool.org:9775 -u MFdqEmmo8a6mT6a8WjMb2BmKaQPrFx2PK6+0.00058207 -p spt
Keep adjusting that until you find a steady setting.
I will be adding these details and a better explanation to the site soon.
Perhaps I can make a calculator for it so it's easier for the end user.
Any ideas why we're getting so many work restarts on SPT stratum? I'm not seeing nearly as many blocks come through as work restarts, and accepted shares seem sporadic
http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz
http://imgur.com/YNa0qPz
Bitbar went poof...
I have restarted it.
I think the problem with this crap is that people keep trying to mine the wrong algo.
I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!
I should probably post the algo type somewhere around the coin.
Or maybe split them up into sections? Rather than list them all together and mark each individual one?
Also, what you're saying is other people hashing on the wrong algo is facking things for the rest of us? Lame...
Yeah, it messes the pool up a little bit.
Causes a high DOA rate and some times actually stops P2Pool from working, like you experienced with BitBar.
I can see it happening, I know what address is doing it, but I have no way to really stop them or warn them.
If I can find a way to get the IP address of the user from their coin address then I could at least block them, but I haven't found that out yet.
tcpdump or if it's something simple like 1 person mining to one port (or even 3 or 4 to one port), should be able to figure it out with some tcpkills
Thanks.
I suppose I could use something like WireShark also to see what IP is sending data with the address too.
Never really thought about that.
Thank you for the suggestion.
Bitbar went poof...
I have restarted it.
I think the problem with this crap is that people keep trying to mine the wrong algo.
I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!
I should probably post the algo type somewhere around the coin.
Or maybe split them up into sections? Rather than list them all together and mark each individual one?
Also, what you're saying is other people hashing on the wrong algo is facking things for the rest of us? Lame...
Yeah, it messes the pool up a little bit.
Causes a high DOA rate and some times actually stops P2Pool from working, like you experienced with BitBar.
I can see it happening, I know what address is doing it, but I have no way to really stop them or warn them.
If I can find a way to get the IP address of the user from their coin address then I could at least block them, but I haven't found that out yet.
tcpdump or if it's something simple like 1 person mining to one port (or even 3 or 4 to one port), should be able to figure it out with some tcpkills
Bitbar went poof...
I have restarted it.
I think the problem with this crap is that people keep trying to mine the wrong algo.
I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!
I should probably post the algo type somewhere around the coin.
Or maybe split them up into sections? Rather than list them all together and mark each individual one?
Also, what you're saying is other people hashing on the wrong algo is facking things for the rest of us? Lame...
Yeah, it messes the pool up a little bit.
Causes a high DOA rate and some times actually stops P2Pool from working, like you experienced with BitBar.
I can see it happening, I know what address is doing it, but I have no way to really stop them or warn them.
If I can find a way to get the IP address of the user from their coin address then I could at least block them, but I haven't found that out yet.
Bitbar went poof...
I have restarted it.
I think the problem with this crap is that people keep trying to mine the wrong algo.
I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!
I should probably post the algo type somewhere around the coin.
Or maybe split them up into sections? Rather than list them all together and mark each individual one?
Also, what you're saying is other people hashing on the wrong algo is facking things for the rest of us? Lame...
Bitbar went poof...
I have restarted it.
I think the problem with this crap is that people keep trying to mine the wrong algo.
I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!
I should probably post the algo type somewhere around the coin.
some people are just stupid, you should let them waste their energy if they dont read up on it first
Bitbar went poof...
I have restarted it.
I think the problem with this crap is that people keep trying to mine the wrong algo.
I had a person the other day email me and ask why they been mining FTC for a whole day with a Block Erupter and haven't received payment, DOH!
I should probably post the algo type somewhere around the coin.
Bitbar went poof... https://i.imgur.com/i8NDiXL.jpg
Looking good now. Nice!
GrandCoin(GDC) down? Showing dead over here on port 9876
Try again my friend.
Sorry about that.
GrandCoin(GDC) down? Showing dead over here on port 9876
I will be adding a block explorer for each coin on P2Pool.org.
Also you can always use P2Pool.org as an addnode for your wallets if you are having trouble syncing.
Happy Mining everyone!
Also you can always use P2Pool.org as an addnode for your wallets if you are having trouble syncing.
Happy Mining everyone!
Ok, I upgraded to 1.8.5 here is my getinfo:
"version" : 1080500,
"protocolversion" : 69001,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 465456,
"connections" : 7,
"proxy" : "",
"difficulty" : 0.71946908,
"testnet" : false,
"keypoololdest" : 1386006463,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00010000,
"errors" : ""
But we have another issue, P2Pool won't connect to the P2P port of the client.
"version" : 1080500,
"protocolversion" : 69001,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 465456,
"connections" : 7,
"proxy" : "",
"difficulty" : 0.71946908,
"testnet" : false,
"keypoololdest" : 1386006463,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00010000,
"errors" : ""
But we have another issue, P2Pool won't connect to the P2P port of the client.
Can someone tell me what client to use?
I compiled the one I am using from GitHub.
I didn't do addnodes or anything, I just compiled and let it run.
I am about to get rid of this coin all together because it's just not a good coin.
I am using version 1.8.0.
I see there are other versions out there also, which one do I use?
I compiled the one I am using from GitHub.
I didn't do addnodes or anything, I just compiled and let it run.
I am about to get rid of this coin all together because it's just not a good coin.
I am using version 1.8.0.
I see there are other versions out there also, which one do I use?
did you fully update to the recently blocks?
as of right now there are 464561 blocks
Upgrading now.
I didn't realize the person updated the GitHub account yesterday with the new source.
I installed IFC a couple days ago.
Everything should be up to snuff here soon.
Can someone tell me what client to use?
I compiled the one I am using from GitHub.
I didn't do addnodes or anything, I just compiled and let it run.
I am about to get rid of this coin all together because it's just not a good coin.
I am using version 1.8.0.
I see there are other versions out there also, which one do I use?
I compiled the one I am using from GitHub.
I didn't do addnodes or anything, I just compiled and let it run.
I am about to get rid of this coin all together because it's just not a good coin.
I am using version 1.8.0.
I see there are other versions out there also, which one do I use?
did you fully update to the recently blocks?
as of right now there are 464561 blocks
Can someone tell me what client to use?
I compiled the one I am using from GitHub.
I didn't do addnodes or anything, I just compiled and let it run.
I am about to get rid of this coin all together because it's just not a good coin.
I am using version 1.8.0.
I see there are other versions out there also, which one do I use?
I compiled the one I am using from GitHub.
I didn't do addnodes or anything, I just compiled and let it run.
I am about to get rid of this coin all together because it's just not a good coin.
I am using version 1.8.0.
I see there are other versions out there also, which one do I use?
Please fix IFC pool.
I am using a wallet, and also the blocks on your IFC pool are behing by about 100k compared to the block explorer.
my address is:
iQBwc7YnAtNXvSGnMGdSRPkz9bkAhNEcW5
and if you look on the graphs section it says i should of been paid, yet on my wallet nothing has come through. (my wallet is up to date)
my address is:
iQBwc7YnAtNXvSGnMGdSRPkz9bkAhNEcW5
and if you look on the graphs section it says i should of been paid, yet on my wallet nothing has come through. (my wallet is up to date)
i dont seem to be receiving any IFC that i mine..
Can you please post the command you are using for your miner.
Also, are you using a wallet address or an address from an exchange?
If the latter, then that is why, you have to use a wallet address, exchanges don't recognize generate transactions.
i dont seem to be receiving any IFC that i mine..
Seems to be working OK now.
Derp, cgwatcher swapped conf files on me, ignore that... Def not working right now >_<
Haha, it happens.
StableCoin should be back in action.
Just set it up, testing it now with my little hashes.
Seems to be working OK now.
Derp, cgwatcher swapped conf files on me, ignore that... Def not working right now >_<
Seems to be working OK now.
SBC seems to reject every share I send... any ideas? ¯\(°_o)/¯
EDIT: All others I've tried here have been fine*
EDIT: All others I've tried here have been fine*
Ah yes, seems like we have an issue.
Give me a few to check it out.
I will let you know when it will be back.
Thnx!
Nice
we need more miner !!!!!
we need more miner !!!!!
I agree!
Happy mining!
SBC seems to reject every share I send... any ideas? ¯\(°_o)/¯
EDIT: All others I've tried here have been fine*
EDIT: All others I've tried here have been fine*
Ah yes, seems like we have an issue.
Give me a few to check it out.
I will let you know when it will be back.
SBC seems to reject every share I send... any ideas? ¯\(°_o)/¯
EDIT: All others I've tried here have been fine*
EDIT: All others I've tried here have been fine*
Nice
we need more miner !!!!!
we need more miner !!!!!
Also, to help clarify what pools are on the new server.
Any pool on the original post that starts with http://p2pool.org is on the new server.
As I switch them over to the new server I will replace the old IP with the domain name.
So any pool that is shown with an IP address is on the old server.
I will keep the old server up until everyone switches over to the new one.
Any pool on the original post that starts with http://p2pool.org is on the new server.
As I switch them over to the new server I will replace the old IP with the domain name.
So any pool that is shown with an IP address is on the old server.
I will keep the old server up until everyone switches over to the new one.
Why so many down 
p2pool mining is best i earn many more then all other server mining´s
p2pool mining is best i earn many more then all other server mining´s
Everything should be back up now.
I upgraded the server, soon I will have the other half on the new server too.
Why so many down
p2pool mining is best i earn many more then all other server mining´s
p2pool mining is best i earn many more then all other server mining´s
Interesting.. And now if you can provide or tell me how to Auto Trade(Exchange) all these coins I would be even more interested in trying it out..
I know CGWatcher I can set all these up there and auto switch to the best coin.. So this is cool you have a one stop shop like this where you can do that..
Now just need a way to Auto Exchange all these coins..
I know CGWatcher I can set all these up there and auto switch to the best coin.. So this is cool you have a one stop shop like this where you can do that..
Now just need a way to Auto Exchange all these coins..
Hello miners!
I just wanted to announce that P2Pool.org now supports 30 coins for your mining pleasure!
That's right! 30 coins to choose from!
What coins can you mine?
Here's the list!
Bitcoin - http://p2pool.org:9332/
Litecoin - http://p2pool.org:9327/
Terracoin - http://p2pool.org:9322/
Feathercoin - http://p2pool.org:9377/
Freicoin - http://p2pool.org:9933/
BitBar - http://p2pool.org:8336/
Mincoin - http://p2pool.org:5643/
Barbecuecoin - http://p2pool.org:8900/
Digitalcoin - http://p2pool.org:25397/
Worldcoin - http://p2pool.org:8245/
Luckycoin - http://p2pool.org:8249/
Novacoin - http://p2pool.org:8888/
Stablecoin - http://p2pool.org:9119/
Franko - http://p2pool.org:7979/
Anoncoin - http://p2pool.org:11775/
Zetacoin - http://p2pool.org:17335/
Krugercoin - http://p2pool.org:8775/
Spots - http://p2pool.org:9775/
Megacoin - http://p2pool.org:16775/
Infinitecoin - http://p2pool.org:20775/
Casinocoin - http://p2pool.org:7777/
Emerald - http://p2pool.org:12125/
Fastcoin - http://p2pool.org:9555/
EZcoin - http://p2pool.org:15775/
Alphacoin - http://p2pool.org:21775/
YAcoin - http://204.10.105.89:12575/
Argentum - http://204.10.105.89:28775
Tigercoin - http://p2pool.org:15665/
AmericanCoin - http://p2pool.org:5050/
GrandCoin - http://p2pool.org:9876/
YBCoin - http://204.10.105.89:18336/ - REMOVED
Recently Added Coins:
Unobtanium - http://p2pool.org:65533/
AsicCoin - http://p2pool.org:18335/
Elacoin - http://p2pool.org:13775/
Shekels - http://p2pool.org:17000/
JouleCoin - http://p2pool.org:64533/
Bottlecaps - http://p2pool.org:8645/
BetaCoin - http://p2pool.org:32335/
SecureCoin - http://p2pool.org:9372/
QuarkCoin - http://p2pool.org:8372/
BYTECoin - http://p2pool.org:6335/
CraftCoin - http://p2pool.org:12129/
If there is a coin that you want to mine that is not listed please tell me and I will try my best to add it.
I currently do not have the knowledge/capabilities to add PoS coins at this time.
Any help in doing so would be greatly appreciated.
Anyways, HAPPY MINING!
I just wanted to announce that P2Pool.org now supports 30 coins for your mining pleasure!
That's right! 30 coins to choose from!
What coins can you mine?
Here's the list!
Bitcoin - http://p2pool.org:9332/
Litecoin - http://p2pool.org:9327/
Terracoin - http://p2pool.org:9322/
Feathercoin - http://p2pool.org:9377/
Freicoin - http://p2pool.org:9933/
BitBar - http://p2pool.org:8336/
Mincoin - http://p2pool.org:5643/
Barbecuecoin - http://p2pool.org:8900/
Digitalcoin - http://p2pool.org:25397/
Worldcoin - http://p2pool.org:8245/
Luckycoin - http://p2pool.org:8249/
Novacoin - http://p2pool.org:8888/
Stablecoin - http://p2pool.org:9119/
Franko - http://p2pool.org:7979/
Anoncoin - http://p2pool.org:11775/
Zetacoin - http://p2pool.org:17335/
Krugercoin - http://p2pool.org:8775/
Spots - http://p2pool.org:9775/
Megacoin - http://p2pool.org:16775/
Infinitecoin - http://p2pool.org:20775/
Casinocoin - http://p2pool.org:7777/
Emerald - http://p2pool.org:12125/
Fastcoin - http://p2pool.org:9555/
EZcoin - http://p2pool.org:15775/
Alphacoin - http://p2pool.org:21775/
YAcoin - http://204.10.105.89:12575/
Argentum - http://204.10.105.89:28775
Tigercoin - http://p2pool.org:15665/
AmericanCoin - http://p2pool.org:5050/
GrandCoin - http://p2pool.org:9876/
YBCoin - http://204.10.105.89:18336/ - REMOVED
Recently Added Coins:
Unobtanium - http://p2pool.org:65533/
AsicCoin - http://p2pool.org:18335/
Elacoin - http://p2pool.org:13775/
Shekels - http://p2pool.org:17000/
JouleCoin - http://p2pool.org:64533/
Bottlecaps - http://p2pool.org:8645/
BetaCoin - http://p2pool.org:32335/
SecureCoin - http://p2pool.org:9372/
QuarkCoin - http://p2pool.org:8372/
BYTECoin - http://p2pool.org:6335/
CraftCoin - http://p2pool.org:12129/
If there is a coin that you want to mine that is not listed please tell me and I will try my best to add it.
I currently do not have the knowledge/capabilities to add PoS coins at this time.
Any help in doing so would be greatly appreciated.
Anyways, HAPPY MINING!
Jump to: