"PoWv 8" developed by PoWFrame is an aluminum frame capable of mining virtual currency at a place of A4 size (192 x 320 mm). Up to 8 GPU (8 video card) can be mounted.
https://openbazaar.com/store/QmRmkfhWgQ2fqUVdzKYe32sDiE3PPAAZoF3BmwyXiqCtHs/8-gpu-vertical-mining-rig-frame-for-cryptocurrency
Disadvantages of existing mining frames
The mainstream aluminum frame for general mining is mainstream with motherboard and power supply unit on the lower row and GPU side by side on the upper row.
For this type, it is necessary to secure a space of at least 500 mm in width. Also, useless space will be generated between the motherboard and the GPU.
PoWv8 with minimum wasted space
In order to solve this problem, PoWFrame worked on the production of a vertical mining frame. And by arranging the GPU and the motherboard vertically instead of horizontally, we succeeded in developing an aluminum frame of about A4 size.
PoWv8 Features
- BTC Up to 8 GPU (6 GPU recommended) can be mounted on aluminum frame of width 192 mm x depth 320 mm x height 680 mm.
- BTC GPU height can be set freely. The graphic board fixes the bracket with two bolts and supports the weight with a column supporter.
- BTC Movement of column supporter and attached frame to the opposite side (motherboard side) enables installation of large-size grabo exceeding 150 mm in height.
- BTC Motherboard is installed with spacer screws on the outside of the aluminum frame. Prevent short circuit.
- BTC Fix the ATX power supply securely in the lower L-shaped frame.
- BTC Cooling GPU with up to 4 12 cm case fans by using attachment.
- BTC No assembly required. Since finished products will be delivered, you can start mining immediately after installing PC parts.
Main Specifications
- Size: 680 x 320 x 192 mm
- Weight: 2.5 kg
- Supported graphics board: Up to 8 units
Set Content
- aluminum frame
- M4 volt
- Square nut
- Circular strut (insulated)
- Hexagonal spacer screw
- 4 x 120 mm Cooling Fan mounting kit
- Fall prevention attachment
* PC parts are not included
Video:
https://youtu.be/kerV4H0Uy-s
Q & A
Q: Is it possible to install a large graphic board?
A: It is possible to install it unless the size of the Video Card main body exceeds the size of the ATX power supply (150 mm). When the height from the tip of the bracket is 165 mm or more, installation can be done by moving the frame with the circular support to the opposite side (motherboard side). When moving the aluminum frame to the opposite side, please be careful that gravo with a width of 140 mm or less may not be able to support the weight of the gravo with circular support. Also, there is a possibility that you can not install a riser card with a large size such as ver 006c. The aluminum frame can be easily detached with a Phillips screwdriver.
Q: Can I install a cooling fan for GPU cooling?
A: By attaching spacer screws to the frame, up to 4 x 120 mm fans can be installed.
Q: Do you have a worry of falling down due to an earthquake?
A: We attach "Lifting preventive attachment" that prevents falling by attaching 4 L-shaped metal fittings to the frame. It can be fastened to the board with screws and securely.
Q: Do you not worry that the motherboard base will touch the aluminum and short-circuit it?
A: Install a spacer on the aluminum frame and install the motherboard and fix it with screws, so there is no worry of shorting.