Antminer c1 Noise level ? | Bitcointalksearch.org

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

i found the leakage, it seemed to be on several places, the Screw to fans perofred the fins and into the tubes, the casting is to close to the fins and the screws provided are to large.

Bad production unit i guess nothing was checked, just done really fast and cheap, i am now down 1thz on my units , and trying to get it work as soon as possible ,:-\

good news that i could lower downmy sp20 noise so atleast i got that going on for me Tongue

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: Sweminer777 on July 16, 2015, 02:10:18 PM

i do recommend a better water cooler system, mine just startet to leak from the radiator, i dont know were from, but it dont seem to have a fix

You would need to try it off and possibly run without fan's for a few seconds and try to spot the leak. You can use papertowls or something to try to find the leak.

Once finding it you have lots of options as far as plugging it where it wont leak again. But needless to say this is why I am not a an of Syscooling just seemed for the money spent they provided very cheap products.

You will also notice Syscooling not even checking the board now. I think their business is pretty much dead, which is a good thing really or miners.

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

i do recommend a better water cooler system, mine just startet to leak from the radiator, i dont know were from, but it dont seem to have a fix

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

Quote from: notlist3d on July 15, 2015, 08:17:21 PM

Quote from: Sweminer777 on July 15, 2015, 07:36:23 PM

yeah i got mine second handed aswell it was quite new when i got it the dude who owned it had it as a hobby and was not on every day.

I would recommend repaste if you get a second hand one, i havent done in mine but i should do it soon aswell.

from china you can get them for 250 us i think, but shipping are 100 us, thats whit no Watercooling kit, complete whit kit you get em for 450 i think whit shipping included.

And it's worth mentioning if you get the watercooling pump from the kit the earlier the kit the worse the pump is chances are. They started off with (i think all of batch 1) being dry tested. Just things a cooling company should know not to but syscooling did it.

I have had 2 since batch 1. One has worked perfect other recently gave me some trouble. Tried a lot and ended up opening one blade. It looked horrible on paste, just not great at all.

I thought it would be here today but looks like tomorrow on gear to clean it up. I ended up getting some decent cleaner, decent thermal paste and good amount keep in mind it's 4 blades, and I already had extra coolant.

So tomorrow I might do it if feeling real crazy. Or might wait till weekend. Not sure yet.

Have looked from the sides, i tought it saw a little bit dry, pump as said i am looking to replace it, feels like it pumps to slow. even looking for better radiator.

I will fill whit car cooling liquid aswell, running water atm, at end of month might fix all this, had to get em working to get some $$ to regain the investment first Tongue

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: Sweminer777 on July 15, 2015, 07:36:23 PM

yeah i got mine second handed aswell it was quite new when i got it the dude who owned it had it as a hobby and was not on every day.

I would recommend repaste if you get a second hand one, i havent done in mine but i should do it soon aswell.

from china you can get them for 250 us i think, but shipping are 100 us, thats whit no Watercooling kit, complete whit kit you get em for 450 i think whit shipping included.

And it's worth mentioning if you get the watercooling pump from the kit the earlier the kit the worse the pump is chances are. They started off with (i think all of batch 1) being dry tested. Just things a cooling company should know not to but syscooling did it.

I have had 2 since batch 1. One has worked perfect other recently gave me some trouble. Tried a lot and ended up opening one blade. It looked horrible on paste, just not great at all.

I thought it would be here today but looks like tomorrow on gear to clean it up. I ended up getting some decent cleaner, decent thermal paste and good amount keep in mind it's 4 blades, and I already had extra coolant.

So tomorrow I might do it if feeling real crazy. Or might wait till weekend. Not sure yet.

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

yeah i got mine second handed aswell it was quite new when i got it the dude who owned it had it as a hobby and was not on every day.

I would recommend repaste if you get a second hand one, i havent done in mine but i should do it soon aswell.

from china you can get them for 250 us i think, but shipping are 100 us, thats whit no Watercooling kit, complete whit kit you get em for 450 i think whit shipping included.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: nonbody on July 15, 2015, 11:18:01 AM

Quote from: Sweminer777 on July 15, 2015, 11:11:06 AM

Miner is quite silent, even whit 6 fanst.

The big one can be noisy if your ambient is warm.

I have mine in a closed enviroment at 40c temp on the ambient, the fan runs at 2600rpm and it's noisy but still not so high.

I am running mine now at 60c each board whit a non stock fan at 1200rpm, sounds nothing and clocked to 1.1k ghz.

i am using normal water, and i had some leakage but just from the outside of the machine, maybe 2-4 drops had not happen again aslong the machine is not tilted for the water to drip in from the plates.

in 2 months the pump stopped once i have no idea why, it's running now whit no problem but im looking for better radiator and better pump wich many have recommended aswell.

i have a spondoolies -tech sp20 and at lowest fan speed i can tell you that c1 is a pleasure in the home enviroment you wont hear it, i still wanting the winter to test those overclock speeds at 2thz on it

.

any place you would recommend buying one from ?

Either here on forums or ebay most likely. They are discontinued as far as production, so you will not find new miners of these.

You have to look into used miners. Make sure you get one with out issues at this point they have been ran for a while. I'm hoping this weekend I finnaly get time to put new thermal paste on one of my C1's.

nonbody

hero member

Activity: 826

Merit: 501

2local[IEO] - https://2local.io/

Quote from: Sweminer777 on July 15, 2015, 11:11:06 AM

Miner is quite silent, even whit 6 fanst.

The big one can be noisy if your ambient is warm.

I have mine in a closed enviroment at 40c temp on the ambient, the fan runs at 2600rpm and it's noisy but still not so high.

I am running mine now at 60c each board whit a non stock fan at 1200rpm, sounds nothing and clocked to 1.1k ghz.

i am using normal water, and i had some leakage but just from the outside of the machine, maybe 2-4 drops had not happen again aslong the machine is not tilted for the water to drip in from the plates.

in 2 months the pump stopped once i have no idea why, it's running now whit no problem but im looking for better radiator and better pump wich many have recommended aswell.

i have a spondoolies -tech sp20 and at lowest fan speed i can tell you that c1 is a pleasure in the home enviroment you wont hear it, i still wanting the winter to test those overclock speeds at 2thz on it

.

any place you would recommend buying one from ?

Sweminer777

hero member

Activity: 754

Merit: 500

1xBit the largest casino

Miner is quite silent, even whit 6 fanst.

The big one can be noisy if your ambient is warm.

I have mine in a closed enviroment at 40c temp on the ambient, the fan runs at 2600rpm and it's noisy but still not so high.

I am running mine now at 60c each board whit a non stock fan at 1200rpm, sounds nothing and clocked to 1.1k ghz.

i am using normal water, and i had some leakage but just from the outside of the machine, maybe 2-4 drops had not happen again aslong the machine is not tilted for the water to drip in from the plates.

in 2 months the pump stopped once i have no idea why, it's running now whit no problem but im looking for better radiator and better pump wich many have recommended aswell.

i have a spondoolies -tech sp20 and at lowest fan speed i can tell you that c1 is a pleasure in the home enviroment you wont hear it, i still wanting the winter to test those overclock speeds at 2thz on it

.

nonbody

hero member

Activity: 826

Merit: 501

2local[IEO] - https://2local.io/

Quote from: notlist3d on July 15, 2015, 09:00:32 AM

Quote from: philipma1957 on July 15, 2015, 08:52:30 AM

Quote from: nonbody on July 15, 2015, 08:44:39 AM

what about water replacement or cleaning ?

people had leaks in them. there is a support thread on it.

I used good coolant and never have had to clean or replace. If you use water yes most likely you will need to clean.

I suggest biting the bullet and buying some coolant. And they are not that loud. Avalon 4.1 is still more quiet. For summer I added 3 fan's to my radiators, making 6 fans on it. But still not bad on noise level.

ok thanks

sounds like a must have miner Cheesy

dunand

hero member

Activity: 637

Merit: 502

In the winter when ambiant temp is 20C the miner is barely audible. The miner fan will adjust speed from 1200rpm to higher. Like notlist3d said if your radiator is doing a good job, the sound level will be low. Underclock it to maintain silence.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: philipma1957 on July 15, 2015, 08:52:30 AM

Quote from: nonbody on July 15, 2015, 08:44:39 AM

what about water replacement or cleaning ?

people had leaks in them. there is a support thread on it.

I used good coolant and never have had to clean or replace. If you use water yes most likely you will need to clean.

I suggest biting the bullet and buying some coolant. And they are not that loud. Avalon 4.1 is still more quiet. For summer I added 3 fan's to my radiators, making 6 fans on it. But still not bad on noise level.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: nonbody on July 15, 2015, 08:44:39 AM

what about water replacement or cleaning ?

people had leaks in them. there is a support thread on it.

nonbody

hero member

Activity: 826

Merit: 501

2local[IEO] - https://2local.io/

what about water replacement or cleaning ?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

they are pretty quiet

Also the avalon 4.1 is quiet

nonbody

hero member

Activity: 826

Merit: 501

2local[IEO] - https://2local.io/

these units are water cooled. what level of noise would they make, could i store one in my bedroom ?

Topic: Antminer c1 Noise level ? (Read 866 times)