Hey,
I have the "same" problem but with only one card it starts "no problem" but after 5min it appears "xxxxxxxxx .."
Karlen log> https://imgur.com/a/0ZMqmZ0
https://imgur.com/a/GPJ0RSz
https://imgur.com/a/VmDZlDF
What would be the problem? board burned?
Topic: Antminer L3 all Hasboards on X (Read 155 times)
Can you put it in a warmer environment and let it warm up for an hour or two before turning it on?
Might be a bit too cold. From the bitmain website:
Operating Temperature: 0C to 40C.
Power supplies also don't like it that cold.
Also, at that temperature condensation can be an issue.
-Dave
Might be a bit too cold. From the bitmain website:
Operating Temperature: 0C to 40C.
Power supplies also don't like it that cold.
Also, at that temperature condensation can be an issue.
-Dave
Hello Guys,
my Antminer L3+ stopped working yesterday at 5AM.
He was running for more than 2 month without any issue.
The thing is that he starts up, everything fine with no X an any hasboard but he has 0 Hashrate. After ~15 to 20 mins all Hasboard turn to X.
I changed the pools, restarted, resetted and flashed the firmware again, nothing helps....
He is located on the attic with a current temperature of -7°C, can this be the problem?
Pictures:
https://imgur.com/a/nx0b3
Thanks in Advance
my Antminer L3+ stopped working yesterday at 5AM.
He was running for more than 2 month without any issue.
The thing is that he starts up, everything fine with no X an any hasboard but he has 0 Hashrate. After ~15 to 20 mins all Hasboard turn to X.
I changed the pools, restarted, resetted and flashed the firmware again, nothing helps....
He is located on the attic with a current temperature of -7°C, can this be the problem?
Pictures:
https://imgur.com/a/nx0b3
Thanks in Advance
Jump to: