Problem solved. Initially I tried to reset it like in manual, power up, press reset for 10 seconds, wait 5 minutes. That didn't work for me twice so what I did was
- power up
- wait 10 minutes
- press reset button for 15 seconds
- wait another 5-10 minutes
- Works afterwards.
Don't know, maybe earlier I pressed it for too short, or pressed reset incorrectly, but all in all after 3rd, longer attempt factory reset occured and static ip setting reversed to DHCP.
Topic: Antminer L3+ can't revert statick IP (Read 102 times)
hello,
by mistake I set my antminer L3+ to static ip instead of DHCP . Now I try to revert it but no succes. So far I tried:
- rebooting from ip ui
- restoring to defaults,
- flashing new firmware
- hard resetting while holding ip report button.
When I try to acces Network tab, it just flat out refuses to go there, giving me Error connection timeout error. \
Please could someone help me and lead to right track on how to get back to DHCP mode? My other L3+ works with DHCP flawlesly.
by mistake I set my antminer L3+ to static ip instead of DHCP . Now I try to revert it but no succes. So far I tried:
- rebooting from ip ui
- restoring to defaults,
- flashing new firmware
- hard resetting while holding ip report button.
When I try to acces Network tab, it just flat out refuses to go there, giving me Error connection timeout error. \
Please could someone help me and lead to right track on how to get back to DHCP mode? My other L3+ works with DHCP flawlesly.
Jump to: