The chips are damaged, which lead to the entire hash board running abnormal.
Resolution: Remove the hash board to repair.
Topic: Antminer L3+ hashboard issues (Read 605 times)
I have similar problems. After some time one hashboard all xxxxxx Soft reboot does not help, sometimes helped power off/on, but but usually one board will completely disappear.
My PSU is Corsair RM1000, from the wall 805W, each hashboard is on separate PCIE AWG16 cable (2x 6pin)
My PSU is Corsair RM1000, from the wall 805W, each hashboard is on separate PCIE AWG16 cable (2x 6pin)
Is the PSU You use unbranded and looks something like this:
https://www.ebay.com/itm/AC110-240V-1650W-1-Way-Mining-Machine-Power-Supply-For-Eth-Bitcoin-Antminer-Mine-/132344254784?hash=item1ed0551140:g:dScAAOSww1dZzSi
Or is it a dedicated server PSU/Bitmains PSU?
https://www.ebay.com/itm/AC110-240V-1650W-1-Way-Mining-Machine-Power-Supply-For-Eth-Bitcoin-Antminer-Mine-/132344254784?hash=item1ed0551140:g:dScAAOSww1dZzSi
Or is it a dedicated server PSU/Bitmains PSU?
Hello bro, i have the same problem with my L3+. Starts doing the same issue like yours.. the issue disappear for 3 days and now it lost 1 hashboard. I don't know what's happens the temp it's good... do u solve it?
Hey
i have an issue with 2 of my antminer l3+ , recently some chips start going X on miner status and then are fine when i reboot and will be fine for 10+hours before some go X again.
What could this be? i have read that poor PSU could cause it.. my psus are 1650W however then are chinese so i start to question the quality...but 2x psus same problem?
Im having a hard time beliving it would happen at the same time with 2 miners.
temps are good and below 64degrees celsius, i dont seem to lose hashpower.. not what i can see anyway..
no overclocking done either
Any tips greatly appreciated.
i have an issue with 2 of my antminer l3+ , recently some chips start going X on miner status and then are fine when i reboot and will be fine for 10+hours before some go X again.
What could this be? i have read that poor PSU could cause it.. my psus are 1650W however then are chinese so i start to question the quality...but 2x psus same problem?
Im having a hard time beliving it would happen at the same time with 2 miners.
temps are good and below 64degrees celsius, i dont seem to lose hashpower.. not what i can see anyway..
no overclocking done either
Any tips greatly appreciated.
Jump to: