Topic: Antminer L3+ showing just 3 hashboards instead of 4 (Read 613 times)
I have the same problem only 3 boards working and im sure its a faulty controller and did you get yours fixed?
this is a normal voltage? antminer L3+ dashboard half chips disappeared
https://www.youtube.com/watch?v=yKgijl3ZrfQ
https://www.youtube.com/watch?v=yKgijl3ZrfQ
How long did it take to get your board repaired? I got a late sept batch and after a few hours the board disappeared.
Did you tried to switch the cables from control board to hashing blades ?
https://shop.bitmain.com/workOrderGuide.htm
Create a repair ticket , your L3+ should be under warranty
https://shop.bitmain.com/workOrderGuide.htm
Create a repair ticket , your L3+ should be under warranty
Thanks for answer. In deed it is damaged. I have tried changing the data cables of each hash board and the #1 is totally missing. So I'll send it for repair. It is pretty new but I asume that it was my responsibility. Basically I left another person "taking care of the miners" also the ventilation duct it had a curve (about 45 degrees) and I've learnt a big lesson it should be straight :S
Thanks man!
Did you tried to switch the cables from control board to hashing blades ?
https://shop.bitmain.com/workOrderGuide.htm
Create a repair ticket , your L3+ should be under warranty
https://shop.bitmain.com/workOrderGuide.htm
Create a repair ticket , your L3+ should be under warranty
Hi there. Since yesterday I can see my panel as the following:
You can notice only 3 hashing boards working just fine. The #1 is missing. There is no xxxxxx or -------- or something else warning or saying something else.
I have tried reseting the miner to factory settings. Switching off/on several times. Changing the PSU unit. Testing the cables on the PSU (all are good 12.3 V+ each). So far I have no more ideas about what to do or try. Since yesterday I'm still waiting for technical support but they may be celebrating another Chinese year :S
Any help it would be very appreciated. Thanks for your time.
You can notice only 3 hashing boards working just fine. The #1 is missing. There is no xxxxxx or -------- or something else warning or saying something else.
I have tried reseting the miner to factory settings. Switching off/on several times. Changing the PSU unit. Testing the cables on the PSU (all are good 12.3 V+ each). So far I have no more ideas about what to do or try. Since yesterday I'm still waiting for technical support but they may be celebrating another Chinese year :S
Any help it would be very appreciated. Thanks for your time.
Jump to: