Topic: Antminer not mining and not beeping (Read 662 times)
Hello Man thanks for you help but i figgerd it out aparintly an update of the firm ware on my router instagated by my internet providers reset my default IP address of my router. bloody basterds reconfigering my roted to my old settinf fixed the issue thanks very much for all your help though guys on this forum are awsome
ta very much as i say any help would eb usefull had trubel in the past that i managed my self but nothing like this adn i have probs been a bit sparing with the details but
(1) no red light diisplaying on the miner LCD display on my miner displays the ip adress 0 hash speed and temp
i his unit is an S2 unit so inside of the unit i can see some stedy red light and a blinking blue ligh but i not very sure is this is very helpfully information.
(2)http://pasteboard.co/2hQkpY6Q.png http://pasteboard.co/2hQnHRkq.png http://pasteboard.co/2hQuwyg6.png
(3) un sure what you mean about everying comeing in and out of my miner dont have a fancy set up this miner is conect to my internet via a switch connected to my hub as i say was wroking until this morning were mineing has stoped. therefor i power down and rebooted the unit at wich point it did not start to mine so i performed a reset of the whole systems and started from scratch with my backup pool to make sure not and issue with the pool i am useing, i pluged a pc in to the same switch as the miner to cheach that i could correctl acess the internet which it could
hopefully this is a bit more usefull informatiuon
(1) no red light diisplaying on the miner LCD display on my miner displays the ip adress 0 hash speed and temp
i his unit is an S2 unit so inside of the unit i can see some stedy red light and a blinking blue ligh but i not very sure is this is very helpfully information.
(2)http://pasteboard.co/2hQkpY6Q.png http://pasteboard.co/2hQnHRkq.png http://pasteboard.co/2hQuwyg6.png
(3) un sure what you mean about everying comeing in and out of my miner dont have a fancy set up this miner is conect to my internet via a switch connected to my hub as i say was wroking until this morning were mineing has stoped. therefor i power down and rebooted the unit at wich point it did not start to mine so i performed a reset of the whole systems and started from scratch with my backup pool to make sure not and issue with the pool i am useing, i pluged a pc in to the same switch as the miner to cheach that i could correctl acess the internet which it could
hopefully this is a bit more usefull informatiuon
Wow, it actually sounds like your S2 is dead.
Try a factory reset. Hit the button on the bottom left of the LCD screen holding it down for 3 seconds. A red LED should blink once per second. This will revert your miner to original settings. If that doesn't work try this, though I don't know to what limits this might reach; (I've never had this problem)
https://bitcointalksearch.org/topic/revive-a-dead-antminer-s2-with-beaglebone-black-rev-c-off-the-shelf-671625
If that doesn't yield results try find exactly what component/s have failed and see if they are replaceable, there are several ways to go about testing individual components of the machine. (Google is your friend!)
-Griff
ta very much as i say any help would eb usefull had trubel in the past that i managed my self but nothing like this adn i have probs been a bit sparing with the details but
(1) no red light diisplaying on the miner LCD display on my miner displays the ip adress 0 hash speed and temp
i his unit is an S2 unit so inside of the unit i can see some stedy red light and a blinking blue ligh but i not very sure is this is very helpfully information.
(2)http://pasteboard.co/2hQkpY6Q.png http://pasteboard.co/2hQnHRkq.png http://pasteboard.co/2hQuwyg6.png
(3) un sure what you mean about everying comeing in and out of my miner dont have a fancy set up this miner is conect to my internet via a switch connected to my hub as i say was wroking until this morning were mineing has stoped. therefor i power down and rebooted the unit at wich point it did not start to mine so i performed a reset of the whole systems and started from scratch with my backup pool to make sure not and issue with the pool i am useing, i pluged a pc in to the same switch as the miner to cheach that i could correctl acess the internet which it could
hopefully this is a bit more usefull informatiuon
(1) no red light diisplaying on the miner LCD display on my miner displays the ip adress 0 hash speed and temp
i his unit is an S2 unit so inside of the unit i can see some stedy red light and a blinking blue ligh but i not very sure is this is very helpfully information.
(2)http://pasteboard.co/2hQkpY6Q.png http://pasteboard.co/2hQnHRkq.png http://pasteboard.co/2hQuwyg6.png
(3) un sure what you mean about everying comeing in and out of my miner dont have a fancy set up this miner is conect to my internet via a switch connected to my hub as i say was wroking until this morning were mineing has stoped. therefor i power down and rebooted the unit at wich point it did not start to mine so i performed a reset of the whole systems and started from scratch with my backup pool to make sure not and issue with the pool i am useing, i pluged a pc in to the same switch as the miner to cheach that i could correctl acess the internet which it could
hopefully this is a bit more usefull informatiuon
Could we have some screenshots of your webpage?
Also is your miner (physically) showing any led lights? This may indicate a problem. (Or two)
So many things could be wrong, be more discriptive about exactly what is going on with everything in and out of your miner or nobody will be able to help you.
Also is your miner (physically) showing any led lights? This may indicate a problem. (Or two)
So many things could be wrong, be more discriptive about exactly what is going on with everything in and out of your miner or nobody will be able to help you.
Hi i been miner for a bit now but suddinly my miner has stoped mineing i can connect to it via browers and it updateds corrrectly. i have tryed a number of diffrent pools and workers to make sure nothings worng there but each time i do this the minier stays idea and the minor status does not chaneg just stays blank was working up untill a few days ago any one have any ideas??
Jump to: