AntMiner R4 Stopped working | Bitcointalksearch.org

insanity007

newbie

Activity: 8

Merit: 0

thanks all for your suggestions ..

Elphamyto

member

Activity: 117

Merit: 16

You can ssh into it with username root and password admin.
I doubt the firmware is causing this, at least, if it was installed correctly.
I had an R4 controller fail and I replaced it with an S9 controller, flashing it with the R4 firmware and it works fine. If the image was installed properly, and your controller isn't broken, it should be working. Make sure you don't have anything preventing javascript from running on that page.

The "ant_data=;" you see in the miner configuration page is there because the header has an inline script that begins with

Code:

echo "ant_data = ${ant_result};"

The script is fetching cgi data from the config saved in /config/bmminer.conf. For some reason it is failing at that point.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: insanity007 on November 24, 2017, 09:36:29 PM

is there a way to connect using ssh....

Too late .

The r4 is very delicate,

They break and break and break.

Someone had a link that show how to reset to the original firmware.

someone gave it to me it may work if you reset it.

I will look for a link to the reset.

In I reset it and it still did not work.

I sent it in to bitmainwarranty and they did fix it.

insanity007

newbie

Activity: 8

Merit: 0

is there a way to connect using ssh....

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: insanity007 on November 24, 2017, 07:57:57 PM

my Antminer R4 (Antminer R4, Batch 5(7.5TH/s)) suddenly stopped working after reboot. i tried various options like reset using different methods but i cant get it to work

even the web based admin console was not reachable however afrer several reboots and holding the IP button i was able to connect to web based control panel...however strange problem is that i cant see the miner config screen though i can see other screens

i updated firmware using web based console n got success message but still same problem persists...

pfa screenshots and kindly advise ...

too late you did firmware upgrade

i can't help you sorry.

if you are usa based maybe bitmain warranty can help

https://bitmainwarranty.com/

the r4 breaks alot and you muscled a firmware update on a broken r4.

your best shot is bitmainwarranty good luck

insanity007

newbie

Activity: 8

Merit: 0

my Antminer R4 (Antminer R4, Batch 5(7.5TH/s)) suddenly stopped working after reboot. i tried various options like reset using different methods but i cant get it to work

even the web based admin console was not reachable however afrer several reboots and holding the IP button i was able to connect to web based control panel...however strange problem is that i cant see the miner config screen though i can see other screens

i updated firmware using web based console n got success message but still same problem persists...

pfa screenshots and kindly advise ...

http://i63.tinypic.com/o7vlm9.png

http://i66.tinypic.com/dvkqch.png

http://i68.tinypic.com/mmsxw4.png

http://i64.tinypic.com/r0up38.png

http://i64.tinypic.com/2njzp01.png

Topic: AntMiner R4 Stopped working (Read 325 times)